| TSB 17-0051 | 1.5L/2.0L/2.3L – ILLUMINATED MALFUNCTION INDICATOR LAMP (MIL) – DTCS P0455, P0456, P144C AND/OR P1450 – BUILT ON OR BEFORE 24-JAN-2017 |
| Publication Date: June 19, 2017 | |
ISSUE:
Some 2017 Escape and MKC vehicles equipped with a 1.5L, 2.0L or 2.3L engine and built on or before 24-Jan-2017 may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0455, P0456, P144C and/or P1450 stored in the powertrain control module (PCM) memory. Vehicles may also exhibit a rough idle and/or slow fuel fill concern. These concerns may be due to liquid fuel carryover into the evaporative emission (EVAP) canister and/or EVAP canister purge valve.
ACTION:
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
- Connect the Ford
Integrated Diagnostic System (IDS) service tool or equivalent scan tool to the data link connector (DLC). Check for DTCs. Is P0455, P0456, P144C and/or P1450 stored in the PCM memory?
- Yes – proceed to Step 2.
- No – this article does not apply. Refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual for normal diagnostics.
- Inspect for liquid fuel at the EVAP canister or EVAP blocking valve.
- 1.5L/2.0L – disconnect the line on the EVAP blocking valve using the quick connect coupling. Refer to Workshop Manual (WSM), Section 303-13.
- 2.3L – disconnect the lower line on the EVAP canister using the quick connect coupling. Refer to WSM, Section 303-13.
- Is liquid fuel present at the EVAP canister or EVAP blocking valve?
- Yes – proceed to Step 4.
- No – this article does not apply. Refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual for normal diagnostics.
- Replace the EVAP canister and the EVAP canister purge valve. Refer to WSM, Section 303-13.
- Before installing new components remove any remaining liquid fuel into a suitable container using a maximum of 172 kPa (25 psi) regulated low pressure shop air. Use a rubber tipped blowgun at the lower EVAP canister vapor line hose connection on the EVAP canister and in the engine compartment at the EVAP canister purge valve vapor line hose connection which leads to the EVAP canister. Refer to WSM, Section 303-13.
| GV6Z-9D289-A | Evaporative Emission Canister Purge Valve – 1.5L |
| GV6Z-9D289-B | Evaporative Emission Canister Purge Valve – 2.0L/2.3L |
| EJ7Z-9D653-A | Evaporative Emission Canister – 2.3L MKC |
| HG9Z-9D653-A | Evaporative Emission Canister – All Except 2.3L MKC |
| W520103-S403 | Exhaust Nut – All Except MKC – 1 pkg |
| W520103-S442 | Exhaust Nut (MKC) – 1 pkg |
| W716824-S442 | Fuel Tank Strap Bolt |
| 5F9Z-4682-AA | Driveshaft Bolt (6 Required) |
| CV6Z-9450-D
No products found. | Exhaust Gasket – All |
| OPERATION | DESCRIPTION | TIME |
| 170051A | 2017 Escape 4X2, MKC FWD: Retrieve DTCs Inspect Vapor Line And Replace The EVAP Emission Canister And Purge Valve Following The Service Procedure (Do Not Use With Any Other Labor Operations) | 1.0 Hr. |
| 170051B | 2017 Escape 4X4, MKC AWD: Retrieve DTCs Inspect Vapor Line And Replace The EVAP Emission Canister And Purge Valve Following The Service Procedure (Do Not Use With Any Other Labor Operations) | 3.0 Hrs. |
WARRANTY STATUS
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
DEALER CODING
| BASIC PART NO. | CONDITION CODE |
| 9D289 | 42 |
SaleBestseller No. 1
AutoLine Pro HyperSmoke™ Automotive Smoke Machine EVAP Vacuum Leak Tester – Adjustable Pressure – OEM Approved Smoke Fluid – Built-in Air Compressor Motor – Includes Cone and Gas Cap EVAP Adapter.
- HyperSmoke Technology – Creates Thick Visible Smoke for Easy Leak Testing. Adjustable Pressure. Infinite Smoke. Instant Warmup. Built-In Air Compressor Motor. OEM Approved Smoke Fluid. Designed and Engineered by AutoLine Pro USA, an American Team of Individuals bringing the latest innovation to you.
- HyperSmoke Benefits – Hypersmoke never overheats, has EVAP mode to protect EVAP from permanent damage, has a mode with higher pressure to test for more leaks like boost/turbo, has a built-in air compressor, comes with proper automotive-grade leak detection fluid for safe and accurate testing, engineered in the USA with custom components and is a professional-grade tool made for serious diagnostic work.
- Includes Everything You Need – Made for ALL Leak Testing Scenarios - EVAP, Vacuum, Intake, Exhaust, Turbo, Superchargers, EGR, Cooling Systems, Engine Blocks, Oil Leaks, Body Work, Wind & Water Leaks, worn rubber, gaskets, seals, connectors, Cars, Trucks, Tractors, Semis, Motorcycles, Scientific Apparatus, and more!
- OEM Approved Smoke Fluid Included – Safe for all systems and sensors. Premium High-Smoke output formula. We’ve included plenty of fluid so you can focus on what’s important – 240 minutes of runtime!
- Adjustable Pressure – Adjustable Pressure gives you the flexibility to leak test a significantly wider array of systems ranging from EVAP all the way to Turbocharged systems. Why is this feature important? EVAP must be tested at under 1 PSI otherwise DAMAGE WILL OCCUR. This is a feature MISSING from other overseas copy-paste smoke machines.
SaleBestseller No. 2
AutoLine Pro HyperSmoke™ Automotive Smoke Machine EVAP Vacuum Leak Tester – Adjustable Pressure – OEM Approved Smoke Fluid – Built-in Air Compressor Motor - Includes Smoke Fluid x2.
- HyperSmoke Technology – Creates Thick Visible Smoke for Easy Leak Testing. Adjustable Pressure. Infinite Smoke. Instant Warmup. Built-In Air Compressor Motor. OEM Approved Smoke Fluid. Designed and Engineered by AutoLine Pro USA, an American Team of Individuals bringing the latest innovation to you.
- HyperSmoke Benefits – Hypersmoke never overheats, has EVAP mode to protect EVAP from permanent damage, has a mode with higher pressure to test for more leaks like boost/turbo, has a built-in air compressor, comes with proper automotive-grade leak detection fluid for safe and accurate testing, engineered in the USA with custom components and is a professional-grade tool made for serious diagnostic work.
- Includes Everything You Need – Made for ALL Leak Testing Scenarios - EVAP, Vacuum, Intake, Exhaust, Turbo, Superchargers, EGR, Cooling Systems, Engine Blocks, Oil Leaks, Body Work, Wind & Water Leaks, worn rubber, gaskets, seals, connectors, Cars, Trucks, Tractors, Semis, Motorcycles, Scientific Apparatus, and more!
- OEM Approved Smoke Fluid Included – Safe for all systems and sensors. Premium High-Smoke output formula. We’ve included plenty of fluid so you can focus on what’s important – 240 minutes of runtime!
- Adjustable Pressure – Adjustable Pressure gives you the flexibility to leak test a significantly wider array of systems ranging from EVAP all the way to Turbocharged systems. Why is this feature important? EVAP must be tested at under 1 PSI otherwise DAMAGE WILL OCCUR. This is a feature MISSING from other overseas copy-paste smoke machines.
Bestseller No. 3
Solary Automotive Smoke Machine Leak Detector - 12V DC EVAP Vacuum Diagnostic Tester for Pipe System
- [Built-in Air Pump]: Smoke machine features a built-in air pump, eliminating the need for an external air source, allowing you to perform tests anytime, anywhere. Simply add about 20ml of baby oil or Glycerin (oil not included) to start your testing effortlessly
- [Multi-Function]: Suitable for a wide range of tests, including EVAP systems, vacuum leaks, low-pressure turbo leaks, intake manifolds, cooling/EGR/exhaust systems, and more. It can be used on cars, motorcycles, and various other vehicles
- [Quick Detection]: The machine generates thick smoke within just 10 seconds of startup, providing enough output to detect even the smallest leaks, ensuring fast and accurate problem identification
- [Lightweight and Portable]: Weighing only 4.4lb, the Solary automotive smoke machine is compact, easy to store, and transport, making it an essential tool for every car owner
- [User-Friendly]: With a simple and intuitive interface, the device has a low entry barrier, making it easy for even first-time users to quickly get started
SaleBestseller No. 4
AutoLine Pro HyperSmoke™ Automotive Smoke Machine EVAP Vacuum Leak Tester | Pro Vers. w/Gauge | Adjustable Pressure - OEM Approved Smoke Fluid - Built-in Air Motor - Cone and EVAP Gas Cap Adapter
- HyperSmoke Technology – Creates Thick Visible Smoke for Easy Leak Testing. Adjustable Pressure. Infinite Smoke. Instant Warmup. Built-In Air Compressor Motor. OEM Approved Smoke Fluid. Designed and Engineered by AutoLine Pro USA, an American Team of Individuals bringing the latest innovation to you.
- HyperSmoke Benefits – Hypersmoke never overheats, has EVAP mode to protect EVAP from permanent damage, has a mode with higher pressure to test for more leaks like boost/turbo, has a built-in air compressor, comes with proper automotive-grade leak detection fluid for safe and accurate testing, engineered in the USA with custom components and is a professional-grade tool made for serious diagnostic work.
- Includes Everything You Need – Made for ALL Leak Testing Scenarios - EVAP, Vacuum, Intake, Exhaust, Turbo, Superchargers, EGR, Cooling Systems, Engine Blocks, Oil Leaks, Body Work, Wind & Water Leaks, worn rubber, gaskets, seals, connectors, Cars, Trucks, Tractors, Semis, Motorcycles, Scientific Apparatus, and more!
- OEM Approved Smoke Fluid Included – Safe for all systems and sensors. Premium High-Smoke output formula. We’ve included plenty of fluid so you can focus on what’s important – 240 minutes of runtime!
- Adjustable Pressure – Adjustable Pressure gives you the flexibility to leak test a significantly wider array of systems ranging from EVAP all the way to Turbocharged systems. Why is this feature important? EVAP must be tested at under 1 PSI otherwise DAMAGE WILL OCCUR. This is a feature MISSING from other overseas copy-paste smoke machines.
SaleBestseller No. 5
AutoLine Pro Shop Series Plus Smoke Machine - EVAP Leak Tester +Air Pump
- NEW BUILT-IN AIR MOTOR: No need for a separate air supply!
- HIGH PERFORMANCE, PREMIUM BUILD: Made in the USA. Solid Thick Metal Construction for durability. Equipped with our brand new AutoLine Pro Ceramic Smoke Coil and Top Rated Smoke Fluid that outputs LOTS OF SMOKE and last a Lifetime.
- PRECISE AND SAFE: Engineered to be 100% safe for all vehicles. Thick smoke output detects even the smallest leaks. A perfect complement to tools such as Fuel Pressure Testers when diagnosing EVAP and fuel-related systems.
- SIMPLE TO USE: (1) Fill with the included OEM Approved or Any Smoke Fluid. (2) Turn on the Built-In Air Motor. (3) Start smoke diagnostics!
- OEM APPROVED SMOKE FLUID INCLUDED: Safe for all systems and sensors. 800 Min Premium High-Smoke output formula. We’ve included plenty of fluid so you can focus on what’s important. ( Other brand's smoke machine just comes with EMPTY bottle)
This product presentation was made with AAWP plugin.