| “This site contains affiliate links for which OEMDTC may be compensated” |
| TECHNICAL SERVICE BULLETIN 2.0L GTDI – Illuminated Malfunction Indicator Lamp (MIL) – Diagnostic Trouble Code (DTC) P04DB – Built On Or Before 8-Sep-2017 |
17-2214 19 October 2017 |
Model:
| Ford 2017 Edge |
Issue: Some 2017 Edge vehicles equipped with a 2.0L Gasoline Turbocharged Direct Injection (GTDI) engine built on or before 8-Sep-2017 may exhibit an illuminated MIL with DTC P04DB (crankcase ventilation system disconnected) in powertrain control module (PCM) memory.
Action: Reprogram the powertrain control module (PCM) to the latest calibration using IDS or Ford J2534 Diagnostic Software (FJDS) release 107.03 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com.
Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
Labor Times
| Description | Operation No. | Time |
| 2017 Edge 2.0L GTDI: Retrieve DTCs And Reprogram The PCM (Do Not Use With Any Other Labor Operations) | 172214A | 0.3 |
Repair/Claim Coding
| Causal Part: | RECALEM |
| Condition Code: | 04 |
Service Procedure
NOTE: ADVISE THE CUSTOMER THAT THIS VEHICLE IS EQUIPPED WITH AN ADAPTIVE TRANSMISSION SHIFT STRATEGY WHICH ALLOWS THE VEHICLE’S COMPUTER TO LEARN THE TRANSMISSION’S UNIQUE PARAMETERS AND IMPROVE SHIFT QUALITY. WHEN THE ADAPTIVE STRATEGY IS RESET, THE COMPUTER WILL BEGIN A RE-LEARNING PROCESS. THIS RE-LEARNING PROCESS MAY RESULT IN FIRMER THAN NORMAL UPSHIFTS AND DOWNSHIFTS FOR SEVERAL DAYS.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
