Interior Cabin Drone Noise – 2017 Lincoln MKZ

“This site contains affiliate links for which OEMDTC may be compensated”

2017 MKZ – 3.0L – Without Harman Revel Audio System – Interior Cabin Drone Noise – Built On Or Before 23-May-2017

Some 2017 MKZ vehicles equipped with a 3.0L engine and without a Harman Revel audio system and built on or before 23-May-2017 may exhibit an interior cabin drone type noise at 1900-2000 RPMs in 5th or 6th gear.

 

Reprogram the digital audio control module C (DACMC) to the latest calibration using the Integrated Diagnostic System (IDS) release 106.01 or higher.

Make sure you are connected to the internet when entering module programming to obtain the latest updates.

Calibration files may also be obtained at www.motorcraftservice.com.

 


 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

  • Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
  • Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device Interior Cabin Drone Noise - 2017 Lincoln MKZ | small light Interior Cabin Drone Noise - 2017 Lincoln MKZ | small light Interior Cabin Drone Noise - 2017 Lincoln MKZ | small light Interior Cabin Drone Noise - 2017 Lincoln MKZ | small light using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com

 

Leave a Comment

Share to...