Window Bounce Back And/Or Loss Of Window One-Touch Functionality

“This site contains affiliate links for which OEMDTC may be compensated”

Apr 26 2017 4742 – 2017 Fusion/MKZ – Window Bounce Back And/Or Loss Of Window One-Touch Functionality – Built On 01-Nov-2016 And Through 15-Mar-2017

Some 2017 Fusion and MKZ vehicles built on 01-Nov-2016 and through 15-Mar-2017 may exhibit front windows that fail to open or close completely, bounce back, and/or have a complete loss of the one-touch feature.

Reprogram the driver door module (DDM) and/or the passenger door module (PDM) to the latest calibration using IDS version 104.04 or higher.

Make sure you are connected to the internet when entering module programming to obtain the latest updates.

Calibration files may also be obtained at www.motorcraftservice.com.

After programming perform the IDS power window initialization procedure.

Access to this IDS learn procedure is available under Toolbox/Body/Power Window Initialization.

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device using Ford Module Programming (FMP) can Reprogram and Configure most Modules.