| 1.5L GTDI ENGINE – VIBRATION IN PARK | |
| Publication Date: July 12, 2016 | |
FORD : | 2014-2016 Fusion |
ISSUE:
Some 2014-2016 Fusion vehicles equipped with a 1.5L Gasoline Turbo Direct Injection (GTDI) engine may exhibit an engine vibration while in park and at idle. This condition may be more pronounced with the A/C on. A new generator pulley is available to reduce the engine vibration.
ACTION:
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
- Does the vehicle exhibit an engine vibration in park and at idle?
- Yes – proceed to Step 2.
- No – this article does not apply. Refer to Workshop Manual (WSM), Section 100-04 for normal diagnostics.
- Is the vehicle equipped with heated seats?
- Yes – this article does not apply. Refer to WSM, Section 100-04 for normal diagnostics.
- No – proceed to Step 3.
- Replace the generator pulley and cap. Refer to WSM, Section 414-02.
- The new pulley has a larger diameter and will help reduce engine vibration.
| OPERATION | DESCRIPTION | TIME |
| 160095A | 2014-2016 Fusion 1.5L GTDI: Verify Concern And Replace The Generator Pulley Includes Time To Remove And Install Generator (Do Not Use With Any Other Labor Operations) | 0.7 Hr. |
WARRANTY STATUS
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
DEALER CODING
| BASIC PART NO. | CONDITION CODE |
| 10344 | 42 |
- Removes Belt Tensioner with Ease: Tool set designed to release tension on serpentine belt systems in most vehicles, mechanic tools allowing for quick belt removal and installation.
- Includes 3/8" Drive Handle for Reach: Automotive tool kit long handle with 3/8-inch square drive provides extra leverage to access tight engine spaces and tensioner pulleys.
- 1/2" Drive Adapter for Versatility: Pulley removal tool includes a 1/2-inch adapter for compatibility with various socket sizes and high-torque applications during belt replacement.
- Complete Socket Selection: Power steering pulley removal tool set includes 4 shallow sockets (13, 15, 16, 18mm socket) and 3 crowfoot sockets (13, 14, 15 mm) to fit most tensioner pulley bolts.
- Organized Storage and Portability: Tensioner pulley tool comes in a sturdy molded plastic case to keep tools protected, organized, and ready for shop use or on-the-go service calls.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
- Combining the innovation of a GEARWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination
- Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley
- Long bar can hold sockets directly or attach to the ratcheting wrench for maximum access
- Includes Drive Tools: Long Bar, Special GearWrench Ratcheting Wrench, and 3/8inch, 1/2inch and 3/4inch Adapters
- Includes 6 Point Sockets: 13 millimeter, 14 millimeter, 15 millimeter, 16 millimeter, 17 millimeter, 18 millimeter and 19 millimeter
Last update on 2026-06-09 / Affiliate links / Images from Amazon Product Advertising API
- Ratcheting head with freewheel position allows maximum leverage
- Comes with extension for hard-to-reach idler pulleys
- Now includes 19mm socket for Honda and Toyota applications
- This tool will work where conventional ratchets or breaker bars won't fit due to limited access
- Set ratcheting head to the middle or neutral/freewheel position and once maximum travel point is reached simply click lever into place to lock the ratchet mechanism
Last update on 2026-06-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.