| “This site contains affiliate links for which OEMDTC may be compensated” |
| FRONT END NOISE/RATTLE – ANTI-RATTLE CLIP LOOSE OR MISSING |
FORD : | 2008 E-Series |
2008 E-Series vehicles may experience noise from the front brakes typically at low speeds, worse over bumps and goes away when the brakes are applied.
SERVICE PROCEDURE
- Confirm brake pad anti-rattle clips are loose or missing by inspecting the calipers. If the clips are not loose or missing, this procedure does not apply. Follow normal Workshop Manual (WSM).
- If the clips are loose or missing refer to WSM, for pad and clip removal and installation instructions.
- When installing the clips and pads into the caliper following the WSM procedure be sure the anti-rattle clips are properly seated (snapped) into the caliper. (Figure 1)
Figure 1
NOTE: IF THE ANTI-RATTLE CLIPS ARE MISSING, DAMAGED OR WILL NOT RETAIN, THEY CAN NOW BE ORDERED SEPARATELY AND NO LONGER REQUIRE THE COMPLETE PAD ASSEMBLY TO BE REPLACED.
| PART NUMBER | PART NAME |
|---|---|
8C2Z-2B164-A  | Caliper Anti-Rattle Clip |
