Neutral Tow Option In The IPC

“This site contains affiliate links for which OEMDTC may be compensated”

SSM 46193 – 2017 Fusion – Neutral Tow Option in the IPC – Built On 27-May-2016 And Through 30-Sep-2016

Some 2017 Fusion vehicles equipped with 1.5L, 2.0L, and 2.5L engines and built on 27-May-2016 and through 30-Sep-2016 may exhibit a neutral tow option in the Instrument Panel Cluster (IPC) that does not respond to inputs.

This feature is not available on these vehicles and should not be available in the IPC.

Reprogram the IPC to the latest calibration using the Integrated Diagnostic System (IDS) version 102.04 or higher.

Make sure you are connected to the internet when entering module programming to obtain the latest updates.

Calibration files may also be obtained at www.motorcraftservice.com.

Use causal part 10849 and applicable labor operations from Section 10 of the service labor time standards (SLTS)manual.

APPLICABLE VEHICLES
2017 CAR: C7 FUSION

https://static.nhtsa.gov/odi/tsbs/2016/SB-10095983-2532.pdf

Taking too long?

Reload document

Open in new tab

Download

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device using Ford Module Programming (FMP) can Reprogram and Configure most Modules.