| “This site contains affiliate links for which OEMDTC may be compensated” |
2014-2015 Transit Connect Equipped With Trailer Tow – Lamp Out Warning When Not Towing A Trailer – Build Dates 01/27/2014 to 06/04/2015
Some 2014-2015 Transit Connect vehicles built between 01/27/2014 and 06/04/2015 equipped with the trailer tow package, may exhibit a “trailer brake bulb” fault message when NOT towing a trailer.
Reprogram the Trailer Module (TRM) to the latest calibration using Integrated Diagnostic System (IDS) release 100.02 and higher.
Calibration files may also be obtained at www.motorcraft.com.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford
, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
