23B27 – Amplifier Replacement and Speaker Test – 2022 Lincoln Corsair

NHTSA ID Number: 10241962

Manufacturer Communication Number: 23B27 S1

Summary

Certain 2022 Model Year Corsair Equipped with Base Radio – Amplifier Replacement and Speaker Test

Supplement 1

 


August 29, 2023

Customer Satisfaction Program 23B27
Certain 2022 Model Year Corsair Equipped with Base Radio
Amplifier Replacement and Speaker TestSUPPLEMENT #1

 

REASON FOR THIS SUPPLEMENT

  • Labor Allowance: Updated Link and QR code for Speaker Test.
  • Technical Instructions: Add Supplement Number
  • Mobile Service Repair Assessment: Add Supplement Number
  • Mobile Repair/Vehicle Pickup and Delivery Record: Add Supplement Number

 

PROGRAM TERMS REASON FOR THIS PROGRAM

Some of the affected vehicles were built with non-functional audio amplifiers. This will result in a loss of subwoofer functionality, resulting in a reduction of audio quality.

 

SERVICE ACTION

Dealers are to perform a speaker test to validate functionality and replace the amplifier on units that fail the speaker walk around test. This service must be performed on all affected vehicles at no charge to the vehicle owner. An updated link and QR Code to a video showing how to perform the speaker walkaround test has been placed in the Labor Allowance section.

To assist vehicle owners to have this repair completed when parts are available, dealers should:

  • Arrange for a mobile repair at the owner’s location:
    • Ensure that parts are available before scheduling Mobile Repair o Be sure to take remedy part(s) to the mobile repair destination.
    • Arrange to pick up the owner’s vehicle and drive it to the dealership for repairs.
    • Re-deliver the owner’s vehicle after repairs have been completed.
  • Pick-up and delivery and mobile service should be made available for all customers. Refer to the LincolneBay logo Pick-up and Delivery and Mobile Repair Claiming Questions sections for further details.

 

OWNER NOTIFICATION AND MAILING SCHEDULE

Owner letters are expected to be mailed the week of August 21, 2023. Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.

 

MOBILE SERVICE REPAIR ASSESSMENT LEVEL

  • All repairs in this program have the following assessment level. – Light Mobile Service

 

MOBILE REPAIR RECOMMENDATIONS

  • Confirm with the customer a mobile repair is feasible.
  • Check OASIS before going to the customer’s home or business to confirm if any other outstanding FSA needs to be completed.
  • Transportation – due to the simplicity of this repair, a specialty vehicle is not required.

 

MOBILE REPAIR ADDITIONAL INFORMATION

Please ensure the technician brings the following to the mobile repair destination:

  • Printed Technical Instructions
  • Remedy Part(s) required for the repair o If parts are not available, mobile repair should not be performed yet
  • Printed Repair/Work Order or any other necessary documentation as customer copy(s) o Documents could also be emailed to the customer.
  • Shirt/uniform and vehicle graphic with the dealership or FordeBay logo logos are recommended.

 

SOLD VEHICLES

  • Owners of affected vehicles will be directed to dealers for repairs.
  • Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date.
  • Correct other affected vehicles identified in OASIS which are brought to your dealership.
  • Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.

 

STOCK VEHICLES

  • Correct all affected units in your new vehicle inventory before delivery.

 

BRANDED / SALVAGED TITLE VEHICLES

Affected branded / salvaged title vehicles are eligible for this service action.

 

OWNER REFUNDS 

Refunds are not approved for this program.

 

RENTAL VEHICLES 

Rental vehicles are not approved for this program.

 

LINCOLN PICKUP AND DELIVERY

Owners of 2017 MY and newer LincolneBay logo vehicles have the option of requesting pickup and delivery service with a LincolneBay logo loaner (up to 2 days), from their dealership. For details, reference EFC12060, 2023 LincolneBay logo Pickup & Delivery Updates.

 

Speaker Walk Around Testhttps://bcove.video/47z5WHf

 

PARTS REQUIREMENTS

Part Number  Description Order Quantity
FP5Z-18B849-AeBay logoAmplifier1

 


CERTAIN 2022 MODEL YEAR LINCOLNeBay logo CORSAIR VEHICLES — AMPLIFIER INSTALL AND SPEAKER TEST

SERVICE PROCEDURE

NOTE: If you suspect that you will not have Internet access at the vehicle’s mobile repair location, then you should print a copy of these instructions (including any required Workshop Manual references) for reference during the mobile repair.

1. Perform a Speaker Walk-Around Test. Press both seek forward buttons, one on the steering wheel and one on the radio control panel, at the same time, for 3 seconds. The display will show Speaker Walk-Around Test. See Figure 1.

NOTE: The test will begin by itself. If a working amplifier is equipped in the vehicle you will hear a deep tone when the display shows Aux 1.

 

2. Was there a deep tone during the Speaker Test when Aux 1 was displayed?

Yes – This recall does not apply.

No – Continue to Step 3.

3. Access the Audio Unit Amplifier space and remove the non-functioning amplifier and bracket. Follow Workshop Manual (WSM) procedures in Section 415-00.

NOTE: The loadspace trim panel can be positioned aside.

4. Remove the non-functioning amplifier from the bracket. Do NOT discard the bolts. See Figure 2.

 

5. Install new amplifier into bracket using bolts from previous step.

Torque: 3 Nm (26 in.lb)

6. Install amplifier assembly and reassemble vehicle. Follow WSM procedures in Section 415-00.

7. Perform a Speaker Walk-Around Test. Press both seek forward buttons, one on the steering wheel and one on the radio control panel, at the same time, for 3 seconds. The display will show Speaker Walk-Around Test.

IMPORTANT NOTE: Federal law prohibits selling motor vehicle parts or components that are under safety, compliance, or emissions recall. Unless a part is requested to be returned to FordeBay logo, all parts replaced under this FSA must be scrapped in accordance with all applicable local, state and federal environmental protection and hazardous material regulations. Refer to the Parts Retention, Return, & Scrapping section of the FSA dealer bulletin for further information.

 


1 Affected Product

Vehicle

MAKEMODELYEAR
LINCOLNeBay logoCORSAIR2022

 


1 Associated Document

Manufacturer Communications

August 29, 2023
Customer Satisfaction Program 23B27

https://www.nhtsa.gov/recalls?nhtsaId=10241962

MC-10241962-0001.pdf 895.784KB

 


NHTSA ID Number: 10241953

Manufacturer Communication Number: 23B27

Summary

Certain 2022 Model Year Corsair Equipped with Base Radio – Amplifier Replacement and Speaker Test

1 Associated Document

Manufacturer Communications

August 14, 2023
Customer Satisfaction Program 23B27

https://www.nhtsa.gov/recalls?nhtsaId=10241953

MC-10241953-0001.pdf 871.83KB

 


 

Bestseller No. 1
Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150<
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
Bestseller No. 2
Taramps TS 400x4 400 watts RMS 4 Channels Full Range Car Audio Amplifier, 2 Bridged Channels, RCA Input Class D, Output Power, Multichannel Amplifier System, Small - TS400X4
  • The Taramps TS line has Multichannel amplifiers, being Full Range amplifiers with 4 channels, and are also amplifiers with high power and cost-benefit
  • The TS 400x4 has 400 Watts RMS at 2 Ohms. As a versatile multichannel amplifier, this powerful amplifier offers the flexibility of bridged connections
  • This multichannel amplifier features 4 channels with 100 Watts RMS each (400 watts RMS total) and also with LED indicator and short-circuit protection
  • This multichannel amplifier features 4 channels with 100 Watts RMS each (400 watts RMS total) and also with LED indicator and short-circuit protection
  • Perfect for various car audio setups, this perfect amplifier comes equipped with a fixed Crossover, and a precise Gain Control.
Bestseller No. 3
Taramps TS 1200x4 Amplifier Car Audio 1200W RMS 2 Ohms 4 Channels 2 Bridged Channels, Full Range Crossover Fixed RCA/Wire Input - Multichannel Class D
  • The Taramps TS Line consists of premium stereo multichannel amplifiers meticulously engineered to deliver exceptional audio performance. These amplifiers offer compatibility with subwoofers, woofers, two-way speakers, three-way speakers, drivers, and super tweeters. The line encompasses amplifiers with 4 channels feature RCA input, and select models also provide a High Level Input option and automatic activation
  • Taramps TS 1200x4 2 Ohms amplifier has 1200 Watts RMS powerhouse packs a punch that will transform your ride. Featuring 4 separate channels with automatic activation, this amp delivers a stunning 300 Watts RMS per channel, distributing its 1200 Watts RMS across the entire frequency spectrum.
  • This versatility allows you to connect a wide range of speakers, drivers, and tweeters, ensuring crystal-clear highs and powerful mids. The TS 1200×4's has High Level and RCA inputs, gain adjustment, and fixed Crossover (HPF, LPF, and Full), providing ultimate flexibility, and fine-tune the amplifier to perfectly match your specific speakers.
  • The TS 1200×4 features a heavy-duty 5 AWG positive/negative power supply cable, 15 AWG output cables, and an 18 AWG remote cable. Its recommended 60A circuit breaker or fuse guarantees reliable operation, protecting your system from potential damage.
  • Dimensions (W x H x L): 5.43" x 1.89" x 9.84" / Weight: 2.73lb
Bestseller No. 4
BOSS Audio Systems R1100M Monoblock Car Amplifier - 1100 High Output, 2-8 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, MOSFET Power Supply
  • DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
  • SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
  • INPUTS/OUTPUTS: RCA & Speaker Level Inputs
  • WARRANTY: BOSS Audio Systems provides a powerful 6-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
Bestseller No. 5
3200W 12V 4 Channel Car Amplifier Stereo Power Amp Audio 4CH Bass Sub Woofer
  • 4 Channel, strong power dynamic voice restores high degree of sound.
  • Aluminium alloy drawing process, slim design, easy to install.
  • Great heat dissipation performance, safe and stable.
  • Energetic, strong power, easy to promote sub woofer. Nondestructive amplifier installation, 360°round sound.
  • Provides you a wonderful in-car entertainment.

Last update on 2026-06-18 / Affiliate links / Images from Amazon Product Advertising API


 

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...