| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10239695
Manufacturer Communication Number: SSM 51802
Summary
Due to a supplier chip-shortage, 2023 Bronco vehicles built on or before 11-Jul-2023 and equipped with a 6-speaker sound system come with a non-operational rear amplifier. This non-operational amplifier (service part number N2DZ-18C804-B) will not produce sound (by design) from the rear subwoofer. The non-operational rear amplifier and subwoofer assembly will appear identical to a working system. Customers have been notified and compensated appropriately for this change to the vehicle. For more details, refer to the Electronic Field Communication titled Product Offering Changes: Ford
Bronco Audio System published on 09-Dec-2022. Vehicles that meet these criteria should not be diagnosed for a symptom related to poor/no performance from the rear subwoofer.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| FORD | BRONCO | 2023 |
1 Associated Document
Manufacturer Communications
SSM 51802
2023 Bronco – 6-Speaker Audio System – Non-Operational Subwoofer – Built On Or Before 11-Jul-2023
Loading...
Reload document 
Open in new tab
NHTSA ID Number: 10239478
Manufacturer Communication Number: SSM 51784
Summary
Due to a supplier chip-shortage, 2023 Bronco vehicles built on or before 11-Jul-2023 and equipped with a 6-speaker sound system come with a non-operational rear amplifier. This non-operational amplifier (service part number N2DZ-18C804-B) will not produce sound (by design) from the rear subwoofer. The non-operational rear amplifier and subwoofer assembly will appear identical to a working system. Customers have been notified and compensated appropriately for this change to the vehicle. For more details, refer to the Electronic Field Communication titled Product Offering Changes: Ford Bronco Audio System published on 09-Dec-2022. Vehicles that meet these criteria should not be diagnosed for a symptom related to poor/no performance from the rear subwoofer.
1 Associated Document
Manufacturer Communications
SSM 51784
2023 Bronco – 6-Speaker Audio System – Non-Operational Subwoofer – Built On Or Before 11-Jul-2023
Loading...
NHTSA ID Number: 10233724
Manufacturer Communication Number: SSM 51438
Summary
Due to a supplier chip-shortage, 2023 Bronco vehicles equipped with a 6-speaker sound system come with a non-operational rear amplifier. This non-operational amplifier (service part number N2DZ-18C804-B) will not produce sound (by design) from the rear subwoofer. The non-operational rear amplifier and subwoofer assembly will appear identical to a working system. Customers have been notified and compensated appropriately for this change to the vehicle. For more details, refer to the Electronic Field Communication titled Product Offering Changes: Ford Bronco Audio System published on 09-Dec-2022. Vehicles that meet these criteria should not be diagnosed for a symptom related to poor/no performance from the rear subwoofer.
1 Associated Document
Manufacturer Communications
SSM 51438
2023 Bronco – 6-Speaker Audio System – Non-Operational Subwoofer
Loading...
- DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
- SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
- INPUTS/OUTPUTS: RCA & Speaker Level Inputs
- WARRANTY: BOSS Audio Systems provides a powerful 6-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
- 2 channels x 1,000 watts @ 2 ohms
- 2 channels x 500 watts @ 4 ohms
- 1 channel x 2,000 watts (mono bridged) @ 4 ohms
- Operates in stereo, bridged mono, or stereo/bridged mono simultaneously
- Variable electronic crossover: 12 dB per octave
- 4-Channel Amplifier
- 55 watts RMS x 4 at 4 ohms
- 80 watts RMS x 4 at 2 ohms
- 160 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode) CTA-2006 compliant
- Variable high- and low-pass filters (50-400 Hz, 12 dB/octave)
- Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality sound in a sturdy form factor
- Specs - Dimensions: 11” x 6.9” x2”, Weight 6.6 lbs.
- Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
- Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its Outputs With No Audio Signal
- Full Range - With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers
- Specs - Dimensions: 7.8” x 9” x 2”, Weight: 3.09 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 90 dB, Frequency Response: 12 Hz to 22 kHz, Fuse Quantity: 1 15 Amp ATO Blade
- BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
- Power - 100 Max x 2 @ 2 Ohms, 50 Max x 2 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- slim to fit in any trunk
- The Taramps TS line has Multichannel amplifiers, being Full Range amplifiers with 4 channels, and are also amplifiers with high power and cost-benefit
- The TS 400x4 has 400 Watts RMS at 2 Ohms. As a versatile multichannel amplifier, this powerful amplifier offers the flexibility of bridged connections
- This multichannel amplifier features 4 channels with 100 Watts RMS each (400 watts RMS total) and also with LED indicator and short-circuit protection
- The Positive/Negative Power Cable is 11 AWG | The Output Cables Wire Gauge is 15 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 20A
- Perfect for various car audio setups, this perfect amplifier comes equipped with a fixed Crossover, Input/Output settings and a precise Level Control.
- 1500W Maximum Power Full-Range Amplifier
- Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
Last update on 2025-04-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.