2016 Explorer Police Utility Vehicles – Rear Liftgate Release Switch Activation
2016 Explorer Police Utility vehicles are equipped with an independent rear liftgate locking feature.
To use the exterior rear liftgate release switch the ignition switch must be in the RUN or START position and the interior liftgate overhead console switch must be pulled, or by pressing the liftgate release button on key fobs equipped with a button.
Once the rear liftgate release switch is activated it will remain active for 45 seconds.
The rear liftgate release switch will become disabled after the 45 seconds have expired or after the liftgate has been opened and closed.
This function operates independent of either the door trim lock/unlock switches or the fob lock/ unlock buttons.
This is a Police application only and was implemented as a result of a request from the Police Advisory Board.
No products found.
- PERMANENT ODOR REMOVAL: Permanently eliminates odors on a molecular level. Removes bad smells like cigarette smoke, wet dog, workout gear and more
- ONE-TIME USE: Simple one-time-use aerosol refreshes every corner of your car’s interior
- AIR REFRESHER: Aerosol mist moves through the ventilation system, across the headliner and in between all other hard-to-reach areas, eliminating odors and leaving a pleasant scent in its place
- EASY TO USE: Simply turn the AC on high, hit the recirculate button, activate the Re-Fresher and close the doors for 10-15 minutes. Then open all doors and air out for 10-15 minutes
- NEW CAR SCENT: Leaves behind a fresh new car aroma. Experience that “new car” feeling again!
No products found.
This product presentation was made with AAWP plugin.
I have the 2017 Explorer as an administrator vehicle, is there a way to bypass this feature and allow the unlock button in the car and remote to work in unlocking the tailgate?
I would check with your local dealer, I think the can change that. This feature is for police cars.