2021

6.7L – Cooling Fan Noisy And/Or Runs Continuously – 2020-2022 Ford F-Super Duty

by
2022 Ford F-Super Duty

NHTSA ID Number: 10210247 Manufacturer Communication Number: SSM 50673 Summary Some 2020-2022 F-Super Duty vehicles equipped with a 6.7L engine may exhibit a cooling fan with excessive noise or stays on continuously. The Workshop Manual (WSM), Section 303-03 Engine Cooling > Diagnosis and Testing > Cooling Fan Control, pinpoint test (PPT) AH for 2021-2022 and Powertrain Control/Emissions … Read more

OTA Over-The-Air Software Update 2.7.3-2.8.3 – 2021 Ford F-150

by
2021 Ford F-150

NHTSA ID Number: 10210939 Manufacturer Communication Number: OTA SU2 P4 F150 Summary Software Update 2 (SU2) Phase 4 for 2021 Model Year F-150 vehicles is now available. Involves: Fix for IPC reboot when receiving phone calls (22-2129). Fix for loud or off tempo turn signal “tick” sound. Fix for Trailer-Back-Up assist not functioning on some vehicles.   … Read more

2.3L EcoBoost – Lack Of Power And Illuminated MIL With DTC P25B4 – 2021-2022 Ford Ranger/Bronco, 2022 Explorer

by
2022 Ford Ranger

NHTSA ID Number: 10210243 Manufacturer Communication Number: SSM 50670 Summary Some 2021-2022 Ranger/Bronco vehicles equipped with a 2.3L EcoBoost engine built on or after 14-Dec-2021 and 2022 Explorer vehicles equipped with a 2.3L EcoBoost engine and built on or after 14-Dec-2021, may exhibit a lack of power with an illuminated malfunction indicator lamp (MIL) with diagnostic trouble … Read more

Instrument Panel Cluster (IPC) Programming Failures – 2021 Ford F-150

by
2021 Ford F-150

NHTSA ID Number: 10210244 Manufacturer Communication Number: SSM 50671 Summary Some 2021 F-150 vehicles may experience an Instrument Panel Cluster (IPC) programming failure during Programmable Module Installation (PMI) and/or Software Update with the Ford Diagnosis and Repair System (FDRS) which states either The Module Configuration Has Failed, Would You Like To Retry? or Procedure Unsuccessful – RestoreDE0x_Range … Read more

Clunk/Pop Noise When Turning – 2018-2022 Ford Mustang (Non-Shelby)

by
2022 Ford Mustang

NHTSA ID Number: 10210245 Manufacturer Communication Number: SSM 50672 Summary Some 2018-2022 Mustang vehicles (Non-Shelby) and built at Flat Rock Assembly may experience a clunk/pop type noise when turning the steering wheel. This may be due to an incorrectly installed upper spring seat which is part of the front strut assembly. To correct this condition, remove the … Read more