NHTSA ID Number: 10202721
Manufacturer Communication Number: 21U06
Summary
Certain 2021 Explorer Vehicles Equipped with 2.3L Engines ; Inspect Left Hand Engine Mount in some of the affected vehicles, the left hand (LH) engine mount may leak hydraulic fluid. Once it leaks enough fluid, the mount will no longer perform as intended. This can lead to increased vehicle vibration and noise.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| FORD | EXPLORER | 2021 |
PROGRAM TERMS
This program will be in effect through October 18, 2024, for unsold vehicles, or up to 60 days post the warranty start date (to allow for sales reporting and claim processing).
AFFECTED VEHICLES
| Vehicle | Model Year | Assembly Plant | Build Dates |
| Explorer | 2021 | Chicago | September 13, 2021 through September 14, 2021 |
REASON FOR THIS PROGRAM
In some of the affected vehicles, the left hand (LH) engine mount may leak hydraulic fluid. Once it leaks enough fluid, the mount will no longer perform as intended. This can lead to increased vehicle vibration and noise.
SERVICE ACTION
Before demonstrating or delivering any new in-stock vehicles involved in this recall, dealers are to inspect the LH engine mount date code and replace the LH mount as necessary per the Technical Information.
OWNER NOTIFICATION MAILING SCHEDULE
Owner letters will not be mailed for this program.
PARTS REQUIREMENTS
| Part Number | Description | Order Quantity | Claim Quantity |
| L1MZ-6038-A | Mount – LH 2.3L Engine | 1 | 1 |
| W712961-S439 | Bolt – Steering Shaft (2 per pkg, 1 req’d) | 1 | 1 |
| BE8Z-6731-AB
Ford Genuine Parts BE8Z-6731-AB Oil Filter
| Oil filter (12 per box, 1 req’d) | 1 | 1 |
| W719326-S439 | Bolt- LH Engine Mount to Engine (4 per pkg, 3 req’d) | 1 | 3 |
| W720485-S439 | Bolt- LH/RH Engine Mount to Frame (4 per pkg, 6 req’d) | 2 | 6 |
| W716979-S439 | Bolt- Rear Subframe (4 per pkg, 2 req’d) | 1 | 2 |
| W719413-S439 | Bolt- Front and Middle Subframe (4 per pkg, 4 req’d) | 1 | 4 |
| W719506-S440 | Nut-Stabilizer Bar Link (4 per pkg, 2 req’d) | 1 | 2 |
| XO-5W30-Q1FS | SAE 5W-30 Full Synthetic Motor Oil | Up to 1 Quart | |
| XG-3-A
Ford Genuine Ford Fluid XG-3-A Silicone Brake Caliper Grease and Dielectric Compound - 3 oz.
| Motorcraft® Silicone Brake Caliper Grease and Dielectric Compound | Claim as Misc. Other Up to $2.00 Total | |
CERTAIN 2021 EXPLORER VEHICLES EQUIPPED WITH 2.3L ENGINES — INSPECT LEFT HAND ENGINE MOUNT
SERVICE PROCEDURE
1. Read the date code from the Left Hand (LH) engine mount.
2. Is the date code 25621? See Figure 1.
NO – Date code inspection PASSES. Program is Complete.
YES – Date code inspection FAILS. Proceed to Step 3.
3. Replace the suspect LH engine mount. Please follow the Workshop Manual (WSM) procedures in Section 303-01A.
4. Check and correct front toe alignment. Please follow the WSM procedures in Section 204-00.
IMPORTANT NOTE: Federal law prohibits selling motor vehicle parts or components that are under safety, compliance, or emissions recall. Unless a part is requested to be returned to Ford
, all parts replaced under this FSA must be scrapped in accordance with all applicable local, state and federal environmental protection and hazardous material regulations. Refer to the Parts Retention, Return, & Scrapping section of the FSA dealer bulletin for further information.
SEOCONTENT-START
© Copyright 2021 Ford Motor Company
David J. Johnson Ford Motor Company
Director P. O. Box 1904
Service Engineering Operations Dearborn, Michigan 48121
Ford Customer Service Division
October 19, 2021
TO: All U.S. Ford
and Lincoln
Dealers
SUBJECT: NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Update Prior to Sale 21U06
Certain 2021 Explorer Vehicles Equipped with 2.3L Engines
Inspect Left Hand Engine Mount
PROGRAM TERMS
This program will be in effect through October 18, 2024, for unsold vehicles, or up to 60 days post the
warranty start date (to allow for sales reporting and claim processing).
AFFECTED VEHICLES
Vehicle Model Year Assembly Plant Build Dates
Explorer 2021 Chicago September 13, 2021 through September 14, 2021
Affected vehicles are identified in OASIS and FSA VIN Lists.
REASON FOR THIS PROGRAM
In some of the affected vehicles, the left hand (LH) engine mount may leak hydraulic fluid. Once it
leaks enough fluid, the mount will no longer perform as intended. This can lead to increased vehicle
vibration and noise.
SERVICE ACTION
Before demonstrating or delivering any new in-stock vehicles involved in this recall, dealers are to
inspect the LH engine mount date code and replace the LH mount as necessary per the Technical
Information.
OWNER NOTIFICATION MAILING SCHEDULE
Owner letters will not be mailed for this program.
ATTACHMENTS
Attachment I: Administrative Information
Attachment II: Labor Allowances and Parts Ordering Information
Attachment III: Technical Information
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web
Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician
System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or
listed under the SSSC tab.
Sincerely,
David J. Johnson
© Copyright 2021 Ford
Motor Company
ATTACHMENT I
Page 1 of 2
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Update Prior to Sale 21U06
Certain 2021 Explorer Vehicles Equipped with 2.3L Engines
Inspect Left Hand Engine Mount
OASIS ACTIVATION
OASIS will be activated on October 19, 2021.
FSA VIN LISTS ACTIVATION
FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com on October 19,
2021.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle
registration records. The use of such motor vehicle registration data for any purpose other than in
connection with this program is a violation of law in several states, provinces, and countries.
Accordingly, you must limit the use of this listing to the follow-up necessary to complete this service
action.
STOCK VEHICLES
• Correct all affected units in your new vehicle inventory before delivery.
OWNER REFUNDS
Refunds are not approved for this program.
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
• For related damage and access time requirements, refer to the Warranty and Policy Manual /
Section 6 – Ford & Lincoln
Program Policies / General Information & Special Circumstances
for FSA’s / Related Damage.
• For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is
required, although related damage must be on a separate repair line with the “Related
Damage” radio button checked.
o Ford vehicles – 3 years or 36,000 miles
CLAIMS PREPARATION AND SUBMISSION
• Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty
Solution (OWS) online.
o When entering claims:
▪ Claim type 31: Field Service Action. The FSA number (21U06) is the sub code.
▪ Customer Concern Code (CCC): N09 – Unusual engine noise
▪ Condition Code (CC): 12
▪ Causal Part Number: 6038
▪ Part Quantity: 0
o For additional claims preparation and submission information, refer to the Recall and
Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
© Copyright 2021 Ford Motor Company
ATTACHMENT I
Page 2 of 2
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Update Prior to Sale 21U06
Certain 2021 Explorer Vehicles Equipped with 2.3L Engines
Inspect Left Hand Engine Mount
CLAIMS PREPARATION AND SUBMISSION (continued)
• Provision for Locally Obtained Supply: Includes Motorcraft® Silicone Brake Caliper Grease
and Dielectric Compound XG-3-A (ESE-M1C171-A).
o Program Code: 21U06
o Misc Expense: OTHER
o Amount: Actual cost up to $2.00
• Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a
separate repair line from the FSA with same claim type and sub code as described in Claim
Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
© Copyright 2021 Ford Motor Company
ATTACHMENT II
Page 1 of 2
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Update Prior to Sale 21U06
Certain 2021 Explorer Vehicles Equipped with 2.3L Engines
Inspect Left Hand Engine Mount
LABOR ALLOWANCES
Description Labor Operation Labor Time
PASS – Inspection of LH Engine Mount Date Code 21U06A 0.3 Hours
FAIL – Inspection of LH Engine Mount Date Code
NO PARTS, Recall Stays Open Until Parts are Available.
21U06AA 0.3 Hours
FAIL – Inspect LH Engine Mount Date Code
Replace LH Engine Mount.
21U06B 4.9 Hours
Check Front Wheel Alignment and Adjust Toe.
Claim with Labor Op 21U06B Only.
21U06C 0.6 Hours
PARTS REQUIREMENTS / ORDERING INFORMATION
Part Number Description
Order
Quantity
Claim
Quantity
L1MZ-6038-A Mount – LH 2.3L Engine 1 1
W712961-S439 Bolt – Steering Shaft (2 per pkg, 1 req’d) 1 1
BE8Z-6731-AB Oil filter (12 per box, 1 req’d) 1 1
W719326-S439 Bolt- LH Engine Mount to Engine (4 per pkg, 3 req’d) 1 3
W720485-S439 Bolt- LH/RH Engine Mount to Frame (4 per pkg, 6 req’d) 2 6
W716979-S439
Bolt- Rear Subframe (4 per pkg, 2 req’d) 1 2
W719413-S439
Bolt- Front and Middle Subframe (4 per pkg, 4 req’d) 1 4
W719506-S440 Nut-Stabilizer Bar Link (4 per pkg, 2 req’d) 1 2
XO-5W30-Q1FS SAE 5W-30 Full Synthetic Motor Oil Up to 1 Quart
XG-3-A Motorcraft® Silicone Brake Caliper Grease and
Dielectric Compound
Claim as Misc. Other
Up to $2.00 Total
Order your parts requirements through normal order processing channels. To guarantee the shortest
delivery time, an emergency order for parts must be placed.
Less than 50% of the affected vehicle population is expected to require an engine mount replacement.
DEALER PRICE
For latest prices, refer to DOES II.
© Copyright 2021 Ford Motor Company
ATTACHMENT II
Page 2 of 2
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Update Prior to Sale 21U06
Certain 2021 Explorer Vehicles Equipped with 2.3L Engines
Inspect Left Hand Engine Mount
PARTS RETENTION, RETURN, & SCRAPPING
Follow the provisions of the Warranty and Policy Manual, Section 1 – WARRANTY PARTS
RETENTION AND RETURN POLICIES. If a replaced part receives a scrap disposition, the part must
be scrapped in accordance with all applicable local, state and federal environmental protection and
hazardous material regulations.
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in
accordance with Policy Procedure Bulletin 4000.
REPLACED FSA PARTS INSPECTION AND SIGN OFF
Effective March 1, 2021 all parts replaced as part of an FSA repair with a repair order open date of
March 1, 2021 or later must be inspected and signed off on the repair order by a member of your
dealers fixed operations management team or an employee the task has been delegated to. If the
task is to be delegated to a non-management employee, the employee needs to be someone other
than the technician who completed the repair and needs to understand the importance of completing
this task consistently and accurately.
• All parts replaced as part of an FSA repair should be returned to the parts department
following the Warranty Parts Retention and Return Policies.
• Inspect the replaced parts to verify the FSA repair was completed.
• If the FSA repair is found to be complete, the designated employee signs the repair order line
or parts return stamp area (electronic or hand signed) for the FSA repair indicating the parts
were inspected and validated to have been replaced.
• After the parts have been inspected, they should be handled based on the guidance in the
parts status report in the Online Warranty System (Hold, Return, CORE, Scrap, etc.).
• This process is subject to review during warranty audits for FSA repairs with a repair order
open date of March 1, 2021 or later. Any eligible FSA claims requiring parts replacement,
found not to have been inspected and signed off during a warranty audit will be subject to
chargeback and consideration for enrollment into the Dealer Incomplete Recall Repair
Process.
Note: Other approvals (electronic or handwritten) for add-on repair lines, dealer owned vehicle
repairs, and repeat repairs do not qualify as FSA parts inspection approvals. The post repair FSA
parts inspection process (electronic or handwritten) is independent from other warranty approval
requirements. The approval by the designated employee implies that the FSA parts were found to be
replaced and must be able to be clearly identified on the Repair Order. If multiple FSA’s require
approval on a single Repair Order, each applicable occurrence will require individual post repair
approval by the designated employee.
ATTACHMENT III
PAGE 1 OF1
UPDATE PRIOR TO SALE 21U06
CPR © 2021 FORD
MOTOR COMPANY
DEARBORN, MICHIGAN 48121
10/2021
CERTAIN 2021 EXPLORER VEHICLES EQUIPPED WITH 2.3L ENGINES — INSPECT
LEFT HAND ENGINE MOUNT
SERVICE PROCEDURE
1. Read the date code from the Left Hand (LH) engine mount.
2. Is the date code 25621? See Figure 1.
NO – Date code inspection PASSES. Program is Complete.
YES – Date code inspection FAILS. Proceed to Step 3.
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
ENGINE
MOUNT
LABEL
21567A
FIGURE 1
3. Replace the suspect LH engine mount. Please follow the Workshop Manual (WSM) procedures in
Section 303-01A.
4. Check and correct front toe alignment. Please follow the WSM procedures in Section 204-00.
IMPORTANT NOTE: Federal law prohibits selling motor vehicle parts or components that are
under safety, compliance, or emissions recall. Unless a part is requested to be
returned to Ford
, all parts replaced under this FSA must be scrapped in
accordance with all applicable local, state and federal environmental
protection and hazardous material regulations. Refer to the Parts Retention,
Return, & Scrapping section of the FSA dealer bulletin for further information.
SEOCONTENT-END
1 Associated Document
Manufacturer Communications
Update Prior to Sale 21U06
October 19, 2021
MC-10202721-0001.pdf 595.837KB
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM
systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required. - 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
- [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
- [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
- [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
- [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
- [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
- [Brand-New ArtiDiag500] We've got everything you're looking for! Forget basic OBD2 scanners; TOPDON's ArtiDiag500 car scanner offers more. The all-new ArtiDiag500 not only includes full OBD2 functions and 4-system diagnostics but also provides DIYers with 6 maintenance services. The brand-new, cost effective AD500 is back in full swing!
- [4-System Diagnostics] DIY enthusiasts, take notice! Will these 4-system diagnostics be the treasure you've been seeking? The ArtiDiag500 code reader offers in-depth testing for the engine, transmission, ABS, and SRS systems, reading fault codes and data streams. It also visualizes real-time data in chart form, simplifying complex data for storage and future playback, aiding DIY users in problem detection.
- [6 Reset Functions] Hey, hang tight for a moment. With these 6 reset functions, the ArtiDiag500 has got you covered. It offers throttle adaptation along with reset capabilities for Oil, SAS, TPMS, BMS, and EPB. Seamlessly aligning the throttle, battery, tires, and brake pads with your vehicle, it also adjusts the steering angle and turns off the oil light. Looking to restore your car to its original condition? Look no further than the ArtiDiag500.
- [Multiple Functions] The Smart AutoVIN of this TOPDON OBD2 scanner keeps track of your manual selections for vehicle make, model, and year and directs you to the suitable diagnostics. Max 4 Live Data streams integrated for much easier data processing. Diagnostic feedback online with this diagnostic tool to help you get tough repair operations well-completed. Real-time car battery voltage monitoring identifies probable vehicle defects.
- [Wide Vehicle Coverage] ArtiDiag500 currently supports 67+ car brands, 10,000+ models, covering most vehicles worldwide. Supports cutting-edge CAN FD protocols, making it compatible with modern vehicles including 2020+ GM & Chrysler. It bypasses the FCA Secure Gateway to stay up to date with newer models from Chrysler, Jeep, Fiat, and others. Plus, it's fully compatible with Android 11 for smoother use. Note: Please charge AD500 regularly to maintain battery performance and prevent power-on issues caused by prolonged periods of non-use.
- 🚗2026 FOXWELL Scanner NT716: Bi-Directional Control – S-ave Hundreds on Repairs. Go beyond basic code readers. The FOXWELL NT716 obd2 scanner lets you actively test components like fuel pumps, cooling fans, injectors, windows, and more—so you can pinpoint issues before replacing parts blindly. Get real-time feedback instantly after plugging in. Delivers pro-level diagnostics at a fraction of the cost of $300–$500 scan tools—perfect for DIY mechanics and home mechanics alike. 👉 Note: Active test requires upgrade.
- 🔧9 Reset Functions – Unlike other scan tool in this price range that offer only 5–7 resets, the FOXWELL NT716 code readers & scan tools supports 9 essential resets: ABS Bleeding, SAS, Oil Light Reset, EPB, BMS, DPF, Throttle Relearn, Injector Coding, and TPMS. View live data streams to monitor vehicle system status, spot potential issues, and reset systems to clear stubborn warning lights. ❗ Notice: This product does NOT support car k-ey programming.
- 🚙4-System OBD Scanners for ABS, Airbag, Transmission & Engine – Effortlessly read and clear error codes, access ECU information, view 4-in-1 live data streams, and save or download data for analysis. The built-in DTC library provides clear explanations of fault codes, and once the issues are fixed, you can clear the codes and turn off warning lights with just one tap. The FOXWELL NT716 Code Scanner empowers you to handle most vehicle diagnostics on your own—saving you time and money without depending on a hard-to-find mechanic.
- 📊 Full Car Diagnostic Scanner with Plug-and-Play Simplicity – Enjoy comprehensive OBD2 functions, including AutoVIN for automatic vehicle information recognition, one-click I/M Readiness smog checks, real-time data graphing, freeze-frame capture, and more. The FOXWELL NT716 scanner for car makes it easy to get ready for annual inspections, helping ensure your vehicle passes with confidence year after year.
- 📱5.5" HD Touchscreen Tablet Car Diagnostic Tool – Say goodbye to the confusion of small 2.8" odb2 scanner with multiple buttons. Featuring a built-in 4000mAh battery, the new version offers greatly improved battery life. No subscriptions or hidden fees—share reports anytime and lifetime f-ree WiFi updates. Runs on Android 9.0, supports 24 languages including English and Spanish, and works with over 100 car brands from 1996 to 2026.
This product presentation was made with AAWP plugin.







