NHTSA ID Number: 10189577
Manufacturer Communication Number: SSM 49685
Summary
Some 2020-2021 Aviator and Explorer vehicles built on and before 24-Feb-2021 may experience an intermittent no crank, inoperative remote start, and/or an illuminated wrench light with diagnostic trouble codes (DTCs) P07E4, B135C and/or U0103. This may be due to a loose ground G210 and/or G214. Check grounds G210 and G214, refer to the Wiring Diagram for location information. If the concern persists, or the grounds are found to be secure, refer to the Workshop Manual and applicable sections of the Powertrain Controls/Emissions Diagnosis (PC/ED) Manual for normal diagnostics.
4 Affected Products
Vehicles
Vehicles:
2020-2021 Aviator (U611N) (TV)
2020-2021 Explorer (U625N) (TW)
1 Associated Document
Manufacturer Communications
SSM 49685: 2020-2021 Explorer/Aviator- Intermittent No Crank, Remote Start Inoperative, Shift System Fault Message And/Or Illuminated Wrench Light P07E4,B135C And/Or U0103
NHTSA ID Number: 10183390
Manufacturer Communication Number: SSM 49329
Summary
Some 2020-2021 Aviator and Explorer vehicles may experience an intermittent no crank, inoperative remote start, and/or an illuminated wrench light with diagnostic trouble codes (DTCs) P07E4, B135C and/or U0103. This may be due to a loose ground G210 and/or G214. Check grounds G210 and G214, refer to the Wiring Diagram for location information. If the concern persists, or the grounds are found to be secure, refer to the Workshop Manual and applicable sections of the Powertrain Controls/Emissions Diagnosis (PC/ED) Manual for normal diagnostics.
1 Associated Document
Manufacturer Communications
SSM 49329 – 2020-2021 Explorer/Aviator- Intermittent No Crank, Remote Start Inoperative, Shift System Fault Message And/Or Illuminated Wrench Light With DTC P07E4, B135C And/Or U0103
Bestseller No. 1
Start-X Remote Starter Kit for Mazda 3 (2014-18), 6 (2014-21), CX-3 (2016-22), CX-5 (2013-25), CX-9 (2016-23), and MX-5 Miata (2016-23) Vehicles | Plug & Play Install | Lock 3X to Remote Start
- 𝗗𝗜𝗬 𝗿𝗲𝗺𝗼𝘁𝗲 𝘀𝘁𝗮𝗿𝘁 𝗸𝗶𝘁: Add remote start functionality to your vehicle for a fraction of the cost. Enjoy a comfortable driving experience from the start by pre-heating and defrosting your windshield in the winter or cooling down your vehicle before entering in the summer.
- 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗰𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆: Mazda 3 (2014, 2015, 2016, 2017, 2018), 6 (2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021), CX-3 (2016, 2017, 2018, 2019, 2020, 2021, 2022), CX-5 (2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025), CX-9 (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023), and MX-5 Miata (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023) models with either push-to-start or key ignition.
- 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀: This kit is designed for both push-to-start and key ignition vehicles. Gas & automatic transmission only. Factory remote required. Some vehicle disassembly may be required; see installation guide for details. As a safety precaution, vehicle will shut down when door is opened; vehicle must be restarted before driving.
- 𝗨𝘀𝗲 𝘆𝗼𝘂𝗿 𝗳𝗮𝗰𝘁𝗼𝗿𝘆 𝗿𝗲𝗺𝗼𝘁𝗲: Start your vehicle by pressing lock 3X on your existing OEM key fob. Press lock 3X again to turn off vehicle. Factory remote required – no remote is included in this kit. The distance you can remote start from is the same distance you can lock/unlock your vehicle.
- To remote start by pressing "lock-unlock-lock", please check out our other kit (the only difference is how you trigger the remote start).
Bestseller No. 2
Start-X Remote Starter Kit for Mazda 3 (2014-18), 6 (2014-21), CX-3 (2016-22), CX-5 (2013-25), CX-9 (2016-23), MX-5 Miata (2016-23) Vehicles | Push-to-Start & Key Ignition | Plug & Play Install
- 𝗗𝗜𝗬 𝗿𝗲𝗺𝗼𝘁𝗲 𝘀𝘁𝗮𝗿𝘁 𝗸𝗶𝘁: Add remote start functionality to your vehicle for a fraction of the cost. Enjoy a comfortable driving experience from the start by pre-heating and defrosting your windshield in the winter or cooling down your vehicle before entering in the summer.
- 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗰𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆: Mazda 3 (2014, 2015, 2016, 2017, 2018), 6 (2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021), CX-3 (2016, 2017, 2018, 2019, 2020, 2021, 2022), CX-5 (2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025), CX-9 (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023), and MX-5 Miata (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023) models with either push-to-start or key ignition.
- 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀: This kit is designed for both push-to-start and key ignition vehicles. Gas & automatic transmission only. Factory remote required. Some vehicle disassembly may be required; see installation guide for details. As a safety precaution, vehicle will shut down when door is opened; vehicle must be restarted before driving.
- 𝗨𝘀𝗲 𝘆𝗼𝘂𝗿 𝗳𝗮𝗰𝘁𝗼𝗿𝘆 𝗿𝗲𝗺𝗼𝘁𝗲: Start your vehicle by pressing "lock-unlock-lock" on your existing OEM key fob. Press "lock-unlock-lock" again to turn off vehicle. Factory remote required – no remote is included in this kit. The distance you can remote start from is the same distance you can lock/unlock your vehicle.
- To remote start by pressing lock 3X, please check out our other kit (the only difference is how you trigger the remote start).
Bestseller No. 3
Start-X Remote Starter Kit for Select Ford F-150/F-250/F-350, Ranger, Transit, Transit Connect, Bronco Sport, Edge, Escape, Expedition & Explorer with Push-to-Start or Key Ignition | Plug & Play
- 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗰𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆: 2015-2020 F-150, 2017-2021 F-250, 2019-2023 Ranger, 2020-2022 Transit, 2019-2022 Transit Connect, 2021-2023 Bronco Sport, 2015-2020 Edge, 2020-2022 Escape, 2018-2021 Expedition, and 2016-2023 Explorer models with either push-to-start or key ignition.
- 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀: This kit is designed for both push-to-start and key blade ignition vehicles. Gas and automatic transmission only. Factory remote required. Some vehicle disassembly may be required; see installation guide for details. As a safety precaution, vehicle will shut down when door is opened; vehicle must be restarted before driving.
- 𝗜𝗠𝗣𝗢𝗥𝗧𝗔𝗡𝗧: A functional hood pin is required for this kit to function. Extra hood pin supplied in kit to use if necessary.
- 𝗗𝗜𝗬 𝗿𝗲𝗺𝗼𝘁𝗲 𝘀𝘁𝗮𝗿𝘁 𝗸𝗶𝘁: Add remote start functionality to your vehicle for a fraction of the cost. Enjoy a comfortable driving experience from the start by pre-heating and defrosting your windshield in the winter or cooling down your vehicle before entering in the summer.
- 𝗨𝘀𝗲 𝘆𝗼𝘂𝗿 𝗳𝗮𝗰𝘁𝗼𝗿𝘆 𝗿𝗲𝗺𝗼𝘁𝗲: Start your vehicle by pressing "lock-unlock-lock" on your existing OEM key fob. Press "lock-unlock-lock" again to turn off vehicle. Factory remote required – no remote is included in this kit. The distance you can remote start from is the same distance you can lock/unlock your vehicle. Increase your remote start distance with a Start-X range extender kit (sold separately).
Bestseller No. 4
Start-X Remote Starter Kit for Non-Hybrid Highlander (2014-2019), C-HR (2018-2019), Land Cruiser (2016-2018) Vehicles with Push-to-Start Ignition Only | Plug & Play Install | Use Your OEM Key Fob
- 𝗗𝗜𝗬 𝗿𝗲𝗺𝗼𝘁𝗲 𝘀𝘁𝗮𝗿𝘁 𝗸𝗶𝘁: Add remote start functionality to your vehicle for a fraction of the cost. Enjoy a comfortable driving experience from the start by pre-heating and defrosting your windshield in the winter or cooling down your vehicle before entering in the summer.
- 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗰𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆: Highlander (2014, 2015, 2016, 2017, 2018, 2019), C-HR (2018-2019), and Land Cruiser (2016, 2017, 2018) models equipped with push-to-start ignition. Not compatible with hybrid models.
- 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀: This kit is designed for push-to-start ignition vehicles only. Not compatible if you start the vehicle by turning a key blade. Gas and automatic transmission only. Factory remote required. Some vehicle disassembly may be required; see installation guide for details. As a safety precaution, vehicle will shut down when door is opened; vehicle must be restarted before driving.
- 𝗨𝘀𝗲 𝘆𝗼𝘂𝗿 𝗳𝗮𝗰𝘁𝗼𝗿𝘆 𝗿𝗲𝗺𝗼𝘁𝗲: Start your vehicle by pressing lock 3X on your existing OEM key fob. Press lock 3X again to turn off vehicle. Factory remote required – no remote is included in this kit. The distance you can remote start from is the same distance you can lock/unlock your vehicle. Increase your remote start distance with a Start-X range extender kit (sold separately).
- 𝗢𝗽𝘁𝗶𝗼𝗻𝗮𝗹 𝗿𝗲𝗺𝗼𝘁𝗲 𝗿𝗮𝗻𝗴𝗲 𝗲𝘅𝘁𝗲𝗻𝗱𝗲𝗿 𝗸𝗶𝘁: Increase your remote start distance up to half a mile. Includes two separate remotes used to start your vehicle in place of your OEM key fob. Available in 1-way (up to 2000-feet) and 2-way (up to 3000-feet) systems.
Bestseller No. 5
Start-X Remote Starter Kit for Non-Hybrid Toyota RAV4 (2013-2018) & Corolla (2014-2019) Vehicles with Push-to-Start Ignition | Plug & Play Install | Use Your OEM Key Fob | Zero Wire Splicing
- 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗰𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆: Toyota RAV4 (2013, 2014, 2015, 2016, 2017, 2018) and Corolla (2014, 2015, 2016, 2017, 2018, 2019) models with push-to-start ignition. *𝗡𝗼𝘁 𝗰𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗹𝗲 𝘄𝗶𝘁𝗵 𝗵𝘆𝗯𝗿𝗶𝗱 𝘃𝗲𝗵𝗶𝗰𝗹𝗲𝘀. 𝗡𝗼𝘁 𝗰𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗹𝗲 𝘄𝗶𝘁𝗵 𝗖𝗼𝗿𝗼𝗹𝗹𝗮 𝟮𝟬𝟭𝟵 𝗵𝗮𝘁𝗰𝗵𝗯𝗮𝗰𝗸 𝗺𝗼𝗱𝗲𝗹𝘀.*
- 𝗩𝗲𝗵𝗶𝗰𝗹𝗲 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀: This kit is designed for push-to-start ignition vehicles only. Not compatible if you start the vehicle by turning a key blade. Gas and automatic transmission only. Factory remote required. Some vehicle disassembly may be required; see installation guide for details. As a safety precaution, vehicle will shut down when door is opened; vehicle must be restarted before driving.
- 𝗜𝗠𝗣𝗢𝗥𝗧𝗔𝗡𝗧: Not compatible with Corolla 2019 hatchback models. Not compatible with hybrid vehicles.
- 𝗗𝗜𝗬 𝗿𝗲𝗺𝗼𝘁𝗲 𝘀𝘁𝗮𝗿𝘁 𝗸𝗶𝘁: Add remote start functionality to your vehicle for a fraction of the cost. Enjoy a comfortable driving experience from the start by pre-heating and defrosting your windshield in the winter or cooling down your vehicle before entering in the summer.
- 𝗨𝘀𝗲 𝘆𝗼𝘂𝗿 𝗳𝗮𝗰𝘁𝗼𝗿𝘆 𝗿𝗲𝗺𝗼𝘁𝗲: Start your vehicle by pressing lock 3X on your existing OEM key fob. Press lock 3X again to turn off vehicle. Factory remote required – no remote is included in this kit. The distance you can remote start from is the same distance you can lock/unlock your vehicle. Increase your remote start distance with a Start-X range extender kit (sold separately).
Last update on 2026-06-07 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.