NHTSA ID Number: 10143079
Manufacturer Communication Number: SSM 47331
Summary
Various vehicles equipped with a 4.6L, 5.4L, 6.8L modular 3 valve engine built on or before 8-Jan-2016 may exhibit symptoms that may include upper end engine noise, rough running, misfire and/or engine damage. If diagnosis leads to only camshaft/camshaft roller follower(s) requiring replacement, replace all of the camshaft roller followers on both banks/cylinder heads with part number 3L3Z-6564-A, not just the faulty roller follower(s). When replacing the camshaft roller followers, refer to Workshop Manual (WSM), Section 303-01.
68 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FORD | EXPEDITION | 2005-2015 |
| FORD | EXPLORER | 2006-2010 |
| FORD | EXPLORER SPORT TRAC | 2007-2010 |
| FORD | F SUPER DUTY | 2005, 2008 |
| FORD | F-150 | 2004-2010 |
| FORD | F-53 | 2006-2009, 2011-2016 |
| FORD | MUSTANG | 2005-2010 |
| FORD | SUPER DUTY | 2006-2007, 2009-2010 |
| LINCOLN | MARK LT | 2005-2008 |
| LINCOLN | NAVIGATOR | 2005-2014 |
| MERCURY | MOUNTAINEER | 2006-2010 |
1 Associated Document
Manufacturer Communications
- Formulated for engines with 75,000 miles or more, Valvoline MaxLife High Mileage synthetic blend is formulated with seal conditioners to help prevent oil leaks and reduce oil consumption
- Delivers 20% better wear protection and 15% better sludge defense than industry standards to help prevent engine breakdown
- Extra detergents safeguard against friction, corrosion and deposits to keep high-mileage engines clean
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency
- Provides performance benefits for high mileage, new and re-built engines alike
- High Mileage for engines 75,000+ miles
- Helps extend engine life of higher mileage vehicles
- Protects for 15,000 miles – guaranteed*
- Contains additives to help fight sludge
- Keeps your engine running like new
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards* | Seal conditioners to help reduce leaks
- Advanced additives that help prevent engine wear | Improved Fuel Economy**
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets Ford WSS-M2C946-B1 | Meets Ford WSS-M2C961-A1 | * Based on API and ACEA volatility specifications | ** In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- As measured in Sequence VH sludge test vs. API SP limits
This product presentation was made with AAWP plugin.





