NHTSA ID Number: 10171969
Manufacturer Communication Number: SSM 48564
Summary
Some 2017-2020 F-Super Duty vehicles may exhibit a characteristic or abnormal steering wheel oscillation concern. The workshop manual (WSM) has been updated to provide diagnostic direction for both symptoms, refer to Section 211-03 Steering Linkage > Diagnosis and Testing > Symptom Chart. This message is only to provide awareness of this WSM update and does not supersede other published diagnostic direction.
16 Affected Products
Vehicles
SSM 48564 – 2017-2020 F-Super Duty – Characteristic Or Abnormal Steering Wheel Oscillation – Workshop Manual Updates
Bestseller No. 1
FNIRSI 2C53T Upgraded Handheld Oscilloscope, 50MHz Bandwidth, 3IN1 Digital Oscilloscope Multimeter DDS Generator, 250MS/s Sampling Rate, 19999 Counts, Voltage, Current, Capacitor, Resistor, Diode Test
- 【Newly Version】The 2C53T is an upgraded version of the 2C23T, which improves the measuring range and adds math operation，cursor measurement，persistence mode，XY mode features
- 【2 Channel Oscilloscope】50 MHz bandwidth, 250 MSa/s sampling rate, 1 Kpts record depth, automatic measurement function, max voltage 400 V, vertical sensitivity 10mV/div-10V/div , support waveform image storage and export
- 【4.5-Digit 19999 Counts Multimeter】AC Voltage: 0-750 V, DC Voltage: 0-999.9 V, DC/AC Current: 0-9.999 A, Resistance: 0-19.99 MΩ, Capacitance: 0-99.99 mF, Continuity Measurement. Multi-function meter for professionals, schools and hobbyists
- 【Signal Generator】The maximum waveform output frequency can reach 50 kHz and a step of 1 Hz, and can output 13 waveforms
- 【Save function】one-click save, screening function. You can upload the saved image by connecting to PC via Type-C. You can easily compare the waveforms by displaying the reference waveform and the measured waveform on the same screen
Bestseller No. 2
FNIRSI DSO152 Handheld Oscilloscope - 2.8" TFT Digital Oscilloscope Kit 200KHz Bandwidth 2.5MS/s High Sampling Rate Portable Pocket Oscilloscope, Trigger Function Auto/Nomal/Single
- 【Faster Sampling Speed】FNIRSI DSO152 handheld oscilloscope has a real-time sampling rate of 2.5 MS/s and a 200 KHz bandwidth. The 10 x probe can measure up to 800 VPP, which is equivalent to 280 V AC. Voltages up to 400 V can be measured
- 【Professional Designed 】The DSO152 automotive oscilloscope supports full trigger modes(Auto/Normal/Single). Works perfectly for both periodic analog signals and aperiodic digital signals. 2.8'' HD LCD display screen, a resolution of 320*240, clear to observe
- 【Portable Oscilloscope】Pocket oscilloscope is an Assembled finished Machine, lightweight and easy to carry, it can be used directly to avoid assembling welding process problems. Applicable to the maintenance industry and R&D education industry
- 【Easy Measuring】Equipped with efficient one-key AUTO setting of all parameters, the measured waveform can be displayed without cumbersome adjustment. Long press the AUTO button to quickly calibrate the baseline,fast measurement of waveforms
- 【Longer Battery Life】FNIRSI DSO152 digital oscilloscope has a built-in 1000 mAh high-quality lithium battery, which can be used continuously for about 4 hours after being fully charged. Type-C interface supports data transmission and charging, firmware upgrade
Bestseller No. 3
FNIRSI 2C53P Handheld Tablet Oscilloscope Multimeter DDS Signal Generator 3 in 1, 2CH Automotive Oscilloscope Multimeters with 50Mhz Bandwidth, 19999 Counts, 250MS/s Sampling, 4.3 inch Touch Screen
- 2 channel oscilloscope multimeter: FNIRSI 2C53P handheld oscilloscope has 250 MS/s sampling rate, 50 Mhz bandwidth. Multimeter 19999 counts, 5 measuring values, max and min display. 4.3-inch IPS touch screen, 480*272 high resolution
- DDS Signal generator: It can output 12 waveforms, the maximum waveform output frequency can reach 10 MHz. FPGA + MCU + ADC hardware structure can ensure a waveform capture function. Support waveform preservation, view and export analysis
- Efficiency improvement: Automotive oscilloscope has efficient one-key AUTO, quickly measure, simplify operations. Support automatic/normal/single trigger.Tablet Oscilloscope suitable for periodic analog signals and non -periodic digital signals
- Comprehensive analysis: X-Y mode can be used to compare the phase, amplitude and frequency of two sets of signals. FFT spectrum analysis can estimate the harmonic content and better handle complex signals
- Long-lasting battery life: The digital oscilloscope has a built-in 4000 mAh lithium battery with a battery life of about 4 hours, and supports Type-C interface charging to ensure uninterrupted work
Bestseller No. 4
FNIRSI DSO-510 Handheld Oscilloscope/DDS Signal Generator 2 in 1, Digital Portable Automotive Oscilloscope 2.8 inch TFT, 10MHz Bandwidth, 48MS/s Sampling Rate, Trigger Function Auto/Nomal/Single
- 【10 MHz Oscilloscope】FNIRSI DSO-510 handheld oscilloscope 10 MHz bandwidth, 48 MS/s sampling rate, 50 ns-20 S time base range. Voltages up to 400 V can be measured
- 【Infinite Afterglow】The digital portable oscilloscope supports the level of display and the infinite afterglow, which can accurately capture the signal features. It supports waveform scaling, suspension, movement and image saving and exporting functions
- 【DDS Signal Generator】FNIRSI DSO-510 can output 13 kinds of waveforms, and the maximum waveform output frequency is up to 50 KHz, which can meet the needs of diversified signal simulation and improve the efficiency of testing and analysis
- 【One-key AUTO】Suitable for periodic analog signals and non-periodic digital signals. 2.8-inch LCD display, 320*240 resolution, which is clear and easy to observe. The one-key AUTO function can automatically optimize the measurement parameters
- 【Long-lasting battery life】The automotive oscilloscope has a built-in 1000mAh lithium battery and supports Type-C interface charging
Bestseller No. 5
FNIRSI DPOS350P 4-in-1 Tablet Oscilloscope 350MHz, Spectrum Analyzer 200KHz - 350MHz, Frequency Response Analyzer DDS Generator, 2CH Handheld Oscilloscope 1 GSa/s, 7" Touch Screen Digital Phosphor
- 【4-in-1】FNIRSI DPOS350P handheld oscilloscope 350 MHz bandwidth, 1 GSa/s, 47 Kpts depth, 8-16-bit resolution, 50,000 wfms/s refresh. 2 channel oscilloscope, 7" touchscreen, digital phosphor, X-Y mode, 2 mV/div ultra-sensitive, ZOOM, 12 auto measurements, cursor
- 【Spectrum Analyzer】FFT-based analysis from 200KHz–350MHz with 4K–32K FFT length. Includes harmonic markers, cursor readouts, real-time 2D/3D waterfall view for EMI checks and signal integrity analysis
- 【Frequency Response Analyzer】100 Hz–50 MHz frequency range, 0–5Vpp amplitude, +2.5 V to -2.5 V offset, 20–500 frequency Count. Measures gain/phase/frequency—ideal for Bode plots, loop stability tests, and analog filter tuning
- 【DDS Signal Generator】Outputs 14 standard waveforms and clipped waveforms. 0–50 MHz frequency range, 1 Hz resolution. 0–5 Vpp amplitude, -2.5 V to +2.5 V offset. Adjustable duty cycle from 0.1% to 99.9%. Supports 500 custom clipping waveforms
- 【Smart Features & Portability】Stores 500 waveforms + 90 screenshots. Supports FFT display, 150M/20M hardware bandwidth limiter, auto power-off. 8000 mAh battery, USB-C charging. Engineered for lab and field use
Last update on 2026-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.