NHTSA ID Number: 10149752
Manufacturer Communication Number: TSB 18-2290
Some 2015-2017 Mustang GT350/GT350R vehicles built before 30-Jun-2017 may exhibit an Exhaust Mode Selection Not Available or Drive Mode Not Available message displayed in the instrument panel cluster (IPC) when attempting to change the exhaust mode or drive mode. This may be due to an exhaust tailpipe valve that has frozen in place when the vehicle was started or driven in temperatures at or below freezing. Follow the Service Procedure steps to correct the condition.
1 Affected Product
Issue: Some 2015-2017 Mustang GT350/GT350R vehicles built before 30-Jun-2017 may exhibit an Exhaust Mode Selection Not Available or Drive Mode Not Available message displayed in the instrument panel cluster (IPC) when attempting to change the exhaust mode or drive mode. This may be due to an exhaust tailpipe valve that has frozen in place when the vehicle was started or driven in temperatures at or below freezing.
Action: Follow the Service Procedure steps to correct the condition.
- Is the Exhaust Mode Selection Not Available or Drive Mode Not Available message displayed in the IPC?
(1). Yes – proceed to Step 2.
- Check the vehicle build date. Was the vehicle built on or before 30-Jun-2017?
(1). Yes – proceed to Step 3.
(2). No – this article does not apply. Refer to WSM, Section 309-00D for normal diagnostics.
- Using the appropriate Ford diagnostic scan tool or equivalent, retrieve DTCs. Is DTC P26FE stored in the powertrain control module (PCM)?
(1). Yes – proceed to Step 4.
(2). No – this article does not apply. Refer to WSM, Section 309-00D for normal diagnostics.
- Reprogram the PCM using the latest version of the appropriate Ford diagnostic scan tool.
- After reprograming, if the concern persists refer to WSM, Section 309-00D for normal diagnostics.
21 September 2018
|Diagnostic Software||Interface Device||Complete Vehicle Diagnostics||Module Programming|
|IDS/FDRS||VCM, VCM II, VCMM||X||X||X||X|
|FJDS/FDRS||Compatible J2534 Devices
(Including VCM II and VCMM)
Detailed system requirements, installation, and support information for each product is located under the diagnostics tool support tab for each product.
For use with VCM I, VCM II, VMM and VCMM hardware devices only. The complete factory Ford Motor Company vehicle diagnostic tool that provides complete dealership level vehicle diagnostic coverage for all 1996 to present Ford, Lincoln and Mercury vehicles. The IDS software includes time based access to the IDS software, software updates and calibration files.
For use with compatible J2534 hardware devices. FJDS software provides Ford Module Programming functionality that covers 1996 to present Ford, Lincoln and Mercury module reprogramming functions, plus complete dealership level vehicle diagnostic software for all 2018 to present Ford and Lincoln vehicles. The FJDS software license includes time based access to the FJDS software, software updates and calibration files.
|CarDAQ-Plus 2 Diagnostic Code Reader and J2534 Programming Tool|
|VSI J2534 ECU Reprogrammer|
|Drew Tech Mongoose Pro USB to CAN ISO9141 Interface|
Module Build Data (As-Built)
Use VIN to obtain As-Built data
- 👍【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘 !
- 👍Fully compatible with both SAE J2534-1 and J2534-2 reprogramming standards and performs standard Pass Thru J2534 functionality. To check compatibility, please contact🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- 👍Compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- 👍Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable.
- 👍Attention: 1. After you ordered and received the J2534, please send us both of the S/N(12 digits, at the back of the device) of the J2534 and your MK908(P) /MS908S (Pro)/ Maxisys Elite to us to bind the two device together. 2. The functions are NOT universally compatible. Please send VIN number to 🚘auteldirect @ outlook . com🚘 to check compatibility before your order.
- 【High-End Diagnostic Tool for ECU Pro-gramming & Coding:14 Brands】LAUNCH X431 PAD V comes with J2534 protocols,which empowers you to program the blank ECUs,match the components,re-flash the second-hand ECUs,etc.you can perform OE-level diagnosis and pro-gramming for more accurate diagnosis and efficient car repair jobs to win more business!
- 【Online Functions +Flash Hidden Features】this diagnostic tool helps you pass-thru the gateway to access the data for coding.(for 2017 and later Chrysler,Dodge,Jeep,Alfa Romeo and Fiat).Guided Function (for V.A.G) ,step by step to guid you to diagnosis.Make full use of hidden features or disable car’s annoying functions.Offline Coding.Modification for BMW 👍it is designed for any professional mechanics and independent repair shops.save time and effort on repairs.
- 【Topology Map & All System Diagnosis for Deep Inspection】X431 PAD V auto scan tool new-added topology module mapping,it is easy to view the communication structure between modules.you can directly access all system to perform functions,view live data in graph.
- 【50+ Maintence Functions & Full Bi-Directional Control】LAUNCH X431 PAD V car diagnostic tool supports 50+ reset service,like key IMMO,abs bleeding,GEARBOX,Oil Reset,Injector coding, Gear Reset, SAS Reset, TPMS Reset, DPF Reset, BMS Reset, ETS Reset, AFS Reset, EGR Adaptation,etc.it also can perform bi-directional control on all systems,like ABS,fuel pumps,windows,doors,etc.
- 【99% Coverage & Support J2534/DoIP/CAN FD/RP1210 Diagnostic Protocols】LAUNCH X431 PAD V supports API standard Communication Interface,with the VCMI Vehicle Communication Measurement Interface.support D-PDU/J2534/RP1210 Protocols👍LAUNCH X431 PAD V scan tool support PEV ( pure electric vehicle ).👍Heavy Duty Software (need extra buy)diagnose gasoline vehicles & 24V Diesel Trucks/buses/trailers/excavators/construction machinery/pick-up/etc.
- 🚗【Same as MaxiSys Elite, No IP Restriction】: Covering 99% of the vehicle models from 1996 to 2022. Based on the MS908S Pro, Autel MK908P diagnostic scan tool enjoys superior hardware configuration, serves 13 languages with no IP restrictions (MS908S Pro ONLY supports English) Lifetime after-sales service and professional technology support have no difference from offline retail version. Feel free to message us with any problems. Present battery tester as a gift (worth 49 bucks).
- 🚗【ECU Programming & Coding, Guru for Local Smith】: To broaden vehicle business and increase your revenue, the Autel scanner MK908P assigns advanced ECU programming and coding to 1) customize your car, 2) unfold the hidden features, 3) disable the annoying functions to improve car performance, but also reprogram the adaptive data to certain components after repairs or replacements. The specific operation varies by model.
- 🚗【36+ Service Functions, Best for Repair Shops】: Designed for large-scale garages and equipped with 36+ repair functions, Autel MK908P covers 99% of cars in the market. This make it the most valuable scanner to serve as many cars as possible in your shop. The 36+ functions include Oil Reset, TPMS, ABS Bleeding, EPB, SAS, Injector Coding, BMS, Suspension, etc. Please be noted MK908P programming tool will always keep pace with newer functions and continuous upgrading, never out of date.
- 🚗【High-end Online Functions, OE-level Auto Scanner】: MK908P diagnostic tool explores all the systems and scans hidden DTCs. For quickly locating the fault, active test sends commands directly to vehicle modules to perform specific tests on windows, sunroofs, wipers, relays, injectors, and actuators, etc. Newly launched online functions obtain the online data from the server like online account login service for VW, Audi, Skoda; online configuration for Renault; online coding for Porsche; etc.
- 🚗【Top-end Configuration, Ultra-Fast Speed】: Same functions with MaxiSys Elite, but configured with 2G+64G memory Hexa-core processor, 10.1” screen, and 15000mAh battery to accelerate diagnostics and repair. 2022 MK908P diagnostic scanner offers more to expand the market and raise income for example power balance for Ford, Chrysler, GM; personalization for VW, Audi, Toyota; guided functions for VW, Audi, Skoda; etc.
- 👍【2022 Newest Updates: AutoAuth Access & Cloud Service】Two long-awaited features for old customers!✅(Since June 2022)Autel original MS908S Pro scanner supports "AutoAuth" gateway access on 2018 and newer Fiat Chrysler vehicles, such as Chrysler, Dodge, Jeep, etc, still growing. ✅(Support Cloud Report Management, you can upload diagnostic reports to Autel Cloud and share reports with your customers through QR Code/email/text message easily, and they can view the reports anytime.
- 👍【A Must for Garage and Workshop】If you need to program Benz/BMW, Autel MS908S Pro scanner is definitely an expert, this is what it does best! MS908S Pro is a mature product that has been tested and approved by workshops across US. Besides ECU Programming for Benz/BWM, MS908S Pro can perform ECU Coding, Active Tests, 36+ Services, All System Diagnostic, FCA “AutoAuth” Access, etc.🚦📢👉 Note: MS908S Pro is for North & South America only and supports English only.
- 👍【One-Stop ECU Programming for BENZ/ BMW】Coming with J2534 ECU programming device, Autel MS908S Pro is competent for ECU programming and ECU coding/ adaption. It can program blank ECU, adapt existed ECU, match components, reflash second-hand ECU, unlock hidden functions, etc. In order to reduce operational burden, MaxiSys MS908S Pro provides one-stop operation to meet the needs of different experienced technicians, no worries about missing some steps and causing failure.
- 👍【Advanced ECU Coding, Customize your Car】Automotive diagnostic scan tool MS908S Pro features Advanced ECU Coding, so you can use it to customize your car as needed by disabling some unneeded OEM settings (like auto start-stop, chimes, etc), or activating the hidden features pre-programmed to car computer to get high-end functions (like US-style daytime light, auto door look at a particular speed, etc).👉Compatible with BWM, VW, Audi, Skoda, etc.
- 👍【OE-level Diagnostic Capability & Guided Function】Auto diagnostic tool MS908S Pro, with J2354 device for BT communication up to 210ft/70m working range, can access all available vehicle modules such as PCM, ECM, TCM, BCM, SCCM, etc, to read codes, clear codes, view live data, perform active tests, etc. Guided functions provides step by step specific guidances to complete some complex service operations. 👉Compatible with VW, Audi, Skoda, Seat, etc.
- 🚩🚩【2 YEARS FREE UPDATE, SAVING $1295 than Maxisys Elite II】Autel Maxisys Elite, more advanced than MS908S Pro & MK908P, but costs much less due to its extended 2 YEARS subscription-free updates; also is almost the same function-wise as Autel scanner Ultra yet more budget-friendly: J2534 ECU Programming & Coding, 10,000+ Car Models Coverage (include Luxury cars), 38+ Hot Functions, Active Tests, Autel Cloud, Repair Data, Remote Expert … aimed at professionals with tons of pro features to match.
- 🚩🚩【J2534 ECU PROGRAMMING, SAME AS MS909/MS919/Ultra】As one of the few Autel scan tools that are designed with a fully-compliant SAE J2534-1/-2 MaxiFlash box, this diagnostic scanner supports Online ECU Programming for all-chassis Benz/BMW users to upgrade the existing software/firmware (till July 2019); ECU Programming for any vehicle with J2534 protocol (manufacturer’s software required); and Online Coding for VW/Audi, Seat, Porsche, Renault, etc. It also allows Online SCN for Benz.
- 🚩🚩【38+ HOT FUNCTIONS, Advanced than MS908SP/MK908P】This professional OBD2 scanner is loaded with 38+ service functions being a one-stop solution to meet ALL your needs for various scheduled repairs or maintenance. It includes Oil, SAS, EPB, TPMS Reset, Injector Coding, SAS, Bleeding, DPF, Battery, Throttle & Anti-theft Matching plus many more that are super beneficial and can be updated constantly with more functions and wider car coverage. *Menus vary by vehicle specifics.
- 🚩🚩【WIDE COMPATIBILITY RATES】Covering 80+ car brands, 150+ makes, 10000+ models, this Autel diagnostic tool’s vehicle coverage will continue to grow with simple internet-ready updates accessible to you via WiFi, and we highly recommend its registration upon the purchase to get 2 YEARS of subscription-free upgrade. More, thanks to the MaxiFix platform with cloud-based Remote Expert, you can ask for help from peers and experienced experts online to fix complex issues even programming or coding.
- 🚩🚩【SUPERIOR HARDWARE, UPGRATED Ver. of MK908P/MS908S Pro】 This 2022 version Autel scanner Elite boasts a 9.7” retina display (2048*1536) as an iPad; quad-core 1.8GHz NVIDIA’s Tegra running 3X faster than competitors under its Android KitKat 4.4; and a set of solid hardware including USB3.0/2.4 & 5GHz Dual WLAN/BT/HDMI/Ethernet Connection; 15400mAh Battery; 8M Rear/2M Front Camera to maximize diagnostic convenience; along with one-stop multitasking to keep intertwined procedures well organized.
- 🔥[2022 New Feature - AutoAuth Access] NOW Autel scanner MK908P has full access to protected FCA vehicles! (👉 Updating your device to get this new feature) With an authenticated AutoAuth account, you can bypass SGW module in 2017 & later FCA cars (Chrysler, Dodge, Jeep, Alfa Romeo, Fiat, etc.) and perform diagnostics: clear codes, bi-directional functions, active tests, actuation & relearns, even more. *Reach us for details.
- 🎉【ECU Programming +Same Functions as Maxisys Elite】Coming with J2534 ECU reprogramming device, Autel MK908P is competent for ECU programming specific BENZ/ BMW. EXACTLY the same functions as Autel MaxiSys Elite, making itself the most cost-effective high-end diagnostic scanner in Autel product line. Also upgraded of MS908S Pro, Autel MK908P auto scanner enjoys superior configuration, serves 13 languages with no IP restrictions (MS908S Pro ONLY supports English).
- 🎉【Online Coding + Active Test】There is online coding for VW, Audi, Porsche, Benz, BMW. Online configuration for Renault is unique among diagnostic industries. Besides, Autel MK908P features Bi-Directional Control (Active Test) to request information or command an actuator to perform specific tests, like cycling the a/c clutch on and off, perform an evaporative emissions leak test and more tests to solve the specific repairing work.
- 🎉【All-system Diagnose + 36 Service Functions】Provided with full-systems diagnosis (ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System, etc.). MaxiSys Pro MK908P also offers another 36+ service functions to help your repairing work faster, easier, and more professional. These service functions include immo keys/throttle/injecor coding/trans adaption/suspension/tyre retrofit/DPF/brake bleed/oil reset and more.
- 🎉【Common + Luxury Car Makes Coverage】MK908P is designed for repairing store, thus it enjoys extensive coverage for almost all car makes. Firstly, it has a wide range of compatibility for over 80 brands in the US, Europe and Asia. Besides, you have access to the newest model with fast-release software update. Moreover, There are basic diagnostic functions and most service / special functions compatible with Lamborghini, Ferrari, Aston Martin and Maserati etc.
- 👍【Advanced Diagnostic Scanner for ECU Programming】 : Autel MK908P has been designed to perform some of the most complicated engine diagnostics and reprogramming in BMW and Mercedes Benz. With the jbox/J2534 VCI or BMW Ethernet Cable, you can edit the cars performance data, like adjusting RPM, fuel injection, etc. A professional car diagnostics scanner to save time/effort on repairs. Form some of the most complicated engine diagnostics and reprogramming in BMW and Mercedes Benz.
- 👍【2022 Newest, 36+ Special Functions 】As 2022 newest professional diagnostic tool, Autel MaxiSys MS908S Pro +MV108 auto scanner can perform 30+ most useful service & special functions like Oil Reset, SAS Calibration, SRS, EPB, DPF Regeneration, Battery Registration, ABS bleed, Injector Coding, Key Fob Coding(add new keys) etc. NOTE: All service & Special functions are NOT universally compatible.
- 👍【Bi-Directional Control & Broad Vehicle Coverage】 Autel MK908P is an advanced bi-directional scan tool that can access and scan all available systems on 80+ makes and models to perform OE level diagnostics that are previously available to dealership tools only to read and clear codes, view live data, perform active tests/component tests to control various components/parts like fuel pump, cylinder, valves, abs motor, wipers, car windows, doors, sunroofs to test its functionality.
- 👍【Easy to Operate】 : The MK908P hardware can equal to a best rank android tablet in the market and that made the whole diagnostic procedure more quickly and precisely. Maxisys platform, cloud-based Maxisys provide a large amount of data about the diagnosis and repair advices, that’s really helpful, whenever you encounter problems, you can find solutions from it.
- 👍【Compatible with Some Add-ons】 : Combination with Oscilloscope Maxi Scope MP408 and Digital Inspection Cameras MV108, the power of this tool is amazing and the detail you receive about every component of the vehicle makes pinpointing a problem painless. Affordable combination of MS908P and TS601 supports TPMS programming, which turns into a powerful diagnostic tool.
- 👍 [J2534 Programming and Coding]: The Autel MK908P has featured both SAE J2534-1 and J2534-2 reprogramming standards, which means it allows you to reprogram emissions-related controllers and, in some cases, diagnose vehicles with factory functionality. Compare with Autel Elite and other tablet scanners, the MK908P has a higher cost performance. Enter the discount code I4TIHS55 and you can get an additional MV105.
- 👍 [Active Test]: The Active Tests, also known as Bi-directional control, empowers you to command the ECUs to perform in-depth tests in specific systems and helps you track down the problems. E.g., the MK908P can work as a controller to roll up and down the windows and help you locate whether the problem is with window controllers or window motors. Note: Enter the discount code I4TIHS55 and you can get an additional MV105.
- 👍 [30+ Special Function & Full-System Diagnosis]: The Full-System Diagnosis supports you in diving into each individual system and finding out the problems without missing out any tiny details. Here are the systems that MK908P can pay a visit: Engine, Transmission, Airbag, ABS, ESP, TPMS, Immobilizer, etc. More than 30+ functions have been packed on MK908P to help you deal with various types of issues. Such as oil reset, EPB, TPMS, BMS, brake bleeding, IMMO, SAS, DPF, etc.
- 👍 [Worldwide Vehicle Coverage]: The MK908P is tailored for workshops and pro mechs to help you with the business you build with your bare hands. The worldwide vehicle coverage gives you the confidence to face a variety of vehicle models and brands. It has compatible with most Asian, EU, and US brands. With later updates, it will also support you to run thorough diagnostic on many luxury brands such as Lamborghini, Ferrari, Aston Martin, etc.
- 👍 [Solid Hardware]: The solid hardware will never drop the ball. Android 4.4 OS, hexa-core processor, KitKat OS, 2GB RAM and 64GB ROM, 10.1" LED screen, 20+ adapters and cables. As for the warranty, we would stick to the old rules, 1 year free update, 12 months warranty, 30 days free refund, 24 hours after-sales service. Please feel free to come to us via e-mail: [email protected]
- 【2022 Designed for CV】Autel MaxiSYS MS908CV is a professional scanner for commercial cars like light/medium/heavy-duty trucks and passenger cars. The extensive vehicle coverage of 150+ makes, bring you more clients. MS908CV shares the same or even adds more fancy diagnostic functions as Elite, MK908P, MS908 Pro, such as luxury hardware, 25 service features, 23 adaption functions, coding, J2534 programming, bi-directional control, full-system diagnostics, etc., giving you smooth experience.
- 【1 Scanner with 48 Services】Autel MS908CV is a scanner specially designed for independent workshops or mechs that deal with heavy machinery. It enjoys the same 25+ service functions as Elite, including Oil Reset/EPB/BMS/DPF/Injector Coding/Throttle/IMMO, etc., and has 23 adaption functions for commercial trucks of all sizes of DOC/DPF Instant Replacement Reset, Fuel Pressure Adaptation Reset, Injector CEOM Reset, etc. Basic, advanced, and special functions can all be done by one MS908CV.
- 【Local-Smith Coding + J2534 Programmer】Autel scanner MS908CV is equal to 1 Elite plus 1 truck-specific diagnostic tool. Advanced ECU coding empowers you to match modules with components, flash the hidden functions, and customize the OE settings, and it’s also compatible with light-duty trucks and semi-trucks. The latest J2534 MaxiFlash Elite, whose individual purchase costs $1000, can perform a comprehensive pass-through programming function, even for the newest controllers.
- 【OE-Level Diagnoses, Distinguished Vehicle Coverage】Autel scan tool MS908CV is suitable for full-system diagnoses for 80+ vehicle makes and 150+ brands worldwide. Quite extensive coverage and deep diagnostic capabilities make MS908CV an industry chief. Real-time push messages alert your systems and software update. The remote control is available anytime and anywhere, and interactive data logging sessions allow direct contact with Autel support staff for troubleshooting.
- 【Active Test Gets Diagnoses Deeper】Through active test, the scanner MS908CV will tell you what isn’t functioning precisely & you can send commands to test various modules in your car’s ODC, which is easy to operate and clear in the guide. For example, control the idle speed of the engine to solve the idle shudder problem; perform a throttle position sensor reset after cleaning the throttle; test fan operation to diagnose water temperature abnormalities, etc.
- VCX is designed on the basis of the latest automotive international standards so that it can support many professional automotive diagnostic applications
- WIFI Version VXDIAG VCX Nano compatible for TOYOTA and Lexus, support both USB connection and WIFI connection, support latest version software, Compatible with varieties protocols. can be very easy to connect various automotive bus to a PC
- OS support both WINDOWS XP and Windows 7, Software support multi-languages: Chinese, English, French, Italian, Spanish, German, ec
- You can download the vxmanager online, if you have any license problem please send us the serial number to extend the license
- One year warranty. Please contact us via order center if you have any problem with software installation
Last update on 2022-07-05 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.