NHTSA ID Number: 10163553
Manufacturer Communication Number: TSB 19-2188
Summary
Some 2015-2017 F-150 vehicles equipped with a 2.7L EcoBoost engine may exhibit excessive white or blue smoke from the exhaust at start up after a cold soak. This may be due to oil entering the left hand turbocharger turbine housing. To correct the condition, follow the Service Procedure steps to replace the left hand turbocharger oil supply tube with a revised part.
3 Affected Products
Vehicle
| FORD | F-150 | 2015-2017 |
Model:
2015-2017 F-150
Issue: Some 2015-2017 F-150 vehicles equipped with a 2.7L EcoBoost engine may exhibit excessive white or blue smoke from the exhaust at start up after a cold soak. This may be due to oil entering the left hand turbocharger turbine housing. To correct the condition, follow the Service Procedure steps to replace the left hand turbocharger oil supply tube with a revised part.
Action: Follow the Service Procedure steps to correct the condition on vehicles that meet all of the following criteria:
- 2015-2017 F-150
- 2.7L EcoBoost engine
- Customer concern of excessive white or blue smoke from the exhaust at start up after a cold soak
Parts
| Description | Quantity | Part Number |
| Left Turbocharger Oil Feed Tube | 1 | FU7Z-9T516-A |
| Coolant Return Tube O-ring | 1 | FT4Z-6N652-D |
| Turbocharger Mounting Stud | 1 | W716383-S437 |
| Turbocharger Mounting Nut | 1 | W714870-S430 |
| Motorcraft® Orange Concentrated Antifreeze/Coolant (All Markets Except Canada) | 2 | VC-3-B
Ford Genuine Fluid VC-13-G Yellow Concentrated Antifreeze/Coolant - 1 Gallon
|
| Motorcraft® Orange Concentrated Antifreeze/Coolant (Canada Only) | 2 | CVC-3-B2 |
Service Procedure
- Does the customer concern include oil consumption, drivability symptoms, or any other concern along with smoke from the exhaust?
(1). Yes – this article does not apply. Refer to the Powertrain Control/Emissions Diagnostic (PC/ED) Manual for normal diagnosis.
(2). No – proceed to Step 2.
- Replace the left hand turbocharger oil supply tube. Refer to Workshop Manual (WSM), Section 303-04E.
SEOCONTENT-START
TECHNICAL SERVICE BULLETIN
2.7L EcoBoost – Excessive White Or Blue Smoke From The Exhaust At
Start Up After A Cold Soak
Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
Labor Times
| Description | Operation No. | Time |
| 2015-2017 F-150 2.7L EcoBoost: Replace The Left Hand Turbocharger Oil Supply Tube
(Do Not Use With Any Other Labor Operations) |
192188A | 1.6
Hrs. |
Repair/Claim Coding
| Causal Part: | 9T516 |
| Condition Code: | 42 |
SEOCONTENT-END
19-2188
08 July 2019
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes*
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets engine test requirements of Chrysler MS 6395 | Meets Ford
WSS-M2C946-B1 | Meets Ford WSS-M2C961-A3 - Or one year, whichever comes first
- Mobil 1 advanced full-synthetic motor oil 5W-30 utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness.
- Helps protect critical engine parts for up to 10,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Formulated for engines with 75,000 miles or more, Valvoline MaxLife High Mileage synthetic blend is formulated with seal conditioners to help prevent oil leaks and reduce oil consumption
- Delivers 20% better wear protection and 15% better sludge defense than industry standards to help prevent engine breakdown
- Extra detergents safeguard against friction, corrosion and deposits to keep high-mileage engines clean
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency
- Provides performance benefits for high mileage, new and re-built engines alike
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Delivers 40% stronger wear protection than industry standards to reduce friction and improve fuel economy
- Provides 15% better deposit defense vs. industry standards, keeping engines cleaner for smoother performance and longer-lasting protection
- Up to 2.5X better heat protection vs. industry standards to fight harmful sludge formation and thermal breakdown
- Engineered for excellent low-temperature flow, reducing metal-to-metal contact during cold starts — when most engine wear typically occurs
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards* | Seal conditioners to help reduce leaks
- Advanced additives that help prevent engine wear | Improved Fuel Economy**
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets Ford WSS-M2C946-B1 | Meets Ford WSS-M2C961-A1 | * Based on API and ACEA volatility specifications | ** In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
This product presentation was made with AAWP plugin.