NHTSA ID Number: 10159494
Manufacturer Communication Number: SSM 47948
Summary
SSM 47948 – 2010-2019 Various Vehicles – Turbocharged Engines – Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube
For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
163 Affected Products
Vehicles
| FORD | EDGE | 2012-2019 |
| FORD | ESCAPE | 2013-2019 |
| FORD | EXPEDITION | 2015-2017 |
| FORD | EXPLORER | 2011-2019 |
| FORD | F-150 | 2011-2019 |
| FORD | F-250 SD | 2011-2019 |
| FORD | F-350 SD | 2011-2019 |
| FORD | F-450 SD | 2011-2019 |
| FORD | F-550 SD | 2011-2019 |
| FORD | F-650 SD | 2016-2019 |
| FORD | F-750 SD | 2016-2019 |
| FORD | FLEX | 2013-2019 |
| FORD | FOCUS | 2013-2018 |
| FORD | FUSION | 2013-2019 |
| FORD | MUSTANG | 2015-2019 |
| FORD | TAURUS | 2010-2019 |
| FORD | TRANSIT | 2015-2019 |
| LINCOLN | CONTINENTAL | 2017-2019 |
| LINCOLN | MKC | 2015-2019 |
| LINCOLN | MKS | 2010-2016 |
| LINCOLN | MKT | 2010-2019 |
| LINCOLN | MKX | 2012-2019 |
| LINCOLN | MKZ | 2013-2019 |
| LINCOLN | NAVIGATOR | 2015-2017 |
SSM 47948
SSM 47662
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes*
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets engine test requirements of Chrysler MS 6395 | Meets Ford WSS-M2C946-B1 | Meets Ford WSS-M2C961-A3
- Or one year, whichever comes first
- Mobil 1 advanced full-synthetic motor oil 5W-30 utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness.
- Helps protect critical engine parts for up to 10,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Formulated for engines with 75,000 miles or more, Valvoline MaxLife High Mileage synthetic blend is formulated with seal conditioners to help prevent oil leaks and reduce oil consumption
- Delivers 20% better wear protection and 15% better sludge defense than industry standards to help prevent engine breakdown
- Extra detergents safeguard against friction, corrosion and deposits to keep high-mileage engines clean
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency
- Provides performance benefits for high mileage, new and re-built engines alike
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Delivers 40% stronger wear protection than industry standards to reduce friction and improve fuel economy
- Provides 15% better deposit defense vs. industry standards, keeping engines cleaner for smoother performance and longer-lasting protection
- Up to 2.5X better heat protection vs. industry standards to fight harmful sludge formation and thermal breakdown
- Engineered for excellent low-temperature flow, reducing metal-to-metal contact during cold starts — when most engine wear typically occurs
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards* | Seal conditioners to help reduce leaks
- Advanced additives that help prevent engine wear | Improved Fuel Economy**
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets Ford
WSS-M2C946-B1 | Meets Ford WSS-M2C961-A1 | * Based on API and ACEA volatility specifications | ** In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
This product presentation was made with AAWP plugin.





