NHTSA ID Number: 10159501
Manufacturer Communication Number: SSM 47903
Summary
SSM 47903 – 2018-2019 F-150/F-Super Duty/Transit – Rear Axle Pinion Seal Fluid Leak/Seepage
Some 2018-2019 F-150, F-Super Duty, and Transit vehicles may exhibit the appearance of a fluid leak or seepage from the rear axle pinion seal. The appearance of a fluid leak or seepage on a vehicle with less than 500 miles or less than 3 months in service may not be due to a failed rear axle pinion seal. The appearance of fluid around the seal may be from the axle assembly being shipped to the vehicle assembly plant with the pinion facing down. To determine if a leak is present, clean the seal area of any residual lubricant and visually inspect the pinion seal for leaks or damage in the seal contact area or dust slinger on the pinion flange dust shield. If no concerns are found, run the vehicle on a hoist in DRIVE at idle speeds for 10 minutes to allow the fluid to circulate and recheck for signs of leakage.
12 Affected Products
Vehicles
FORD | F-150 | 2018-2019 |
| FORD | F-250 SD | 2018-2019 |
| FORD | F-350 SD | 2018-2019 |
| FORD | F-450 SD | 2018-2019 |
| FORD | F-550 SD | 2018-2019 |
| FORD | TRANSIT | 2018-2019 |
SSM 47903
- Designed for oil and grease seals.
- Equipment Manufacturer (OEM) part to fit your vehicle.
- Two size tips reach in and fit nearly all seal applications.
- Handle is 12-1/2" long.
- [THICKENED 30% DUAL HOOK TIPS] The wheel seal puller features dual hook tips that are 30% thicker compared to regular models. Made from premium steel with heat treatment, these hook tips of the twin hook seal puller ensures exceptional hardness and durability. ( Tip: The top of this hooks is pointed, so it may bend when hooking hard metal objects with a lot of force. )
- [TWO SIZES FOR VERSATILE COMPATIBILITY] This oil seal removal tool comes with dual hook tips, each featuring a different curve and angle to fit a variety of oil and grease seals. Designed for easy access to tight spaces, it helps you tackle even the toughest seal removal tasks with ease.
- [EFFORT-SAVING LONG HANDLE] Designed with a long handle, this oil seal puller maximizes leverage for quick and easy seal removal, saving you time and effort. The axle seal puller chrome-plated surface resists rust and allows for effortless grease cleanup.
- [COMFORTABLE GRIP] The handle of this bearing seal puller is made of high-quality PVC impregnation, which has a good non-slip effect and a comfortable grip. The seal remover tool can be used for a long time and effectively reduce hand fatigue.
- [WIDE APPLICATION] This grease seal puller is ideal for light trucks, cars, SUVs, and race cars, as well as other equipment requiring seal removal. Designed for quick and easy oil seal removal and replacement, the grease seals removal tool makes the job effortless.
- Comes with an extra blade for future replacement, realize one buy get 2 piece of blades. No need to wait, can replace the blade immediately
- Heat treated steel provides your daily basic using with necessary hardness, ensures product durability, can effectively prolong the service life
- 2 size hook tips fit more repairing situation and allows easier removal of hard-to-get-at seals
- Quality material handle avoids distortion, ensures durability. Chrome plated can perfectly prevent the seal puller from rusting. And enables you easily wipe away gunk and grease, preparing them for the next job at hand
- Ideal for light trucks, cars, and SUVs seal removal, is your seal pulling job's good helper
- Head Adjusts to 5 Positions.
- Two hook sizes easily remove most oil and grease seals.
- Where clearance is a problem, remove the pin to reposition the head.
- The adjustable head works great on front wheel drive transaxles.
- Also works on front crankshaft seals without removing the radiator.
This product presentation was made with AAWP plugin.