5.0L – Chirping Noise From Engine Compartment At Idle – 2018-2019 Ford F-150 & Mustang

NHTSA ID Number: 10159504

Manufacturer Communication Number: SSM 47911

Summary

SSM 47911 – 2018-2019 F-150/MustangeBay logo – 5.0L – Chirping Noise From Engine Compartment At Idle Some 2018-2019 F-150 and MustangeBay logo vehicles equipped with a 5.0L engine may exhibit a chirping type noise from the upper right side of the engine at a warm or hot idle. This noise may sound similar to a front engine accessory drive (FEAD) chirp noise. If the noise persists with the FEAD belt removed and is isolated to the front cover area, this noise may be due to the primary timing chain tensioner. This noise will not result in any engine durability concerns. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.

 

4 Affected Products

Vehicles

FORDeBay logoF-1502018-2019
FORDeBay logoMUSTANGeBay logo2018-2019

 


SSM 47911

https://www.nhtsa.gov/recalls?nhtsaId=10159504
https://static.nhtsa.gov/odi/tsbs/2019/MC-10159504-0001.pdf

 


SSM 47876

https://www.nhtsa.gov/recalls?nhtsaId=10156596
https://static.nhtsa.gov/odi/tsbs/2019/MC-10156596-0001.pdf

 


 

Bestseller No. 1
Castrol GTX Full Synthetic 5W-30 Motor Oil, 5 Quarts
  • 6X better wear protection on critical engine parts than industry standards**
  • 1.3X better sludge protection than industry standards*
  • 3X Stronger against viscosity breakdown than leading full synthetic^
  • Protection for 10,000 miles between oil changes
  • As measured in Sequence VH sludge test vs. API SP limits
SaleBestseller No. 2
Valvoline Advanced Full Synthetic SAE 5W-30 Motor Oil 5 QT
  • Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
  • Delivers 40% stronger wear protection than industry standards to reduce friction and improve fuel economy
  • Provides 15% better deposit defense vs. industry standards, keeping engines cleaner for smoother performance and longer-lasting protection
  • Up to 2.5X better heat protection vs. industry standards to fight harmful sludge formation and thermal breakdown
  • Engineered for excellent low-temperature flow, reducing metal-to-metal contact during cold starts — when most engine wear typically occurs
Bestseller No. 3
Mobil 1 High Mileage Full Synthetic Motor Oil 5W-30, 5 Quart
  • Mobil 1 High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
  • Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
SaleBestseller No. 4
Castrol GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 5 Quarts
  • Phosphorus Replacement Technology helps extend emission system life
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards* | Seal conditioners to help reduce leaks
  • Advanced additives that help prevent engine wear | Improved Fuel Economy**
  • Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets FordeBay logo WSS-M2C946-B1 | Meets FordeBay logo WSS-M2C961-A1 | * Based on API and ACEA volatility specifications | ** In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
Bestseller No. 5
Mobil 1 Extended Performance High Mileage Full Synthetic Motor Oil 5W-30, 5 Quart
  • Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes.*
  • Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...