2018 F-150 – 5.0L – Illuminated Malfunction Indicator Lamp (MIL) – Diagnostic Trouble Codes (DTCs) P0390 And/Or P0394
Some 2018 F-150 vehicles equipped with a 5.0L engine may exhibit an illuminated MIL with DTCs P0390 and/or P0394.
These DTCs may be caused by low engine oil level.
Before performing any diagnosis or repair, make sure the oil level is between the minimum and maximum marks on the oil level indicator.
If the oil level is below the minimum mark, diagnose the low oil level concern first.
Refer to the Workshop Manual, Section 303-00.
If the oil level is in the normal operating range, inspect C1627.
If no concerns are present, replace the bank 2 (LH) exhaust variable camshaft timing (VCT) solenoid.
Do not replace camshaft position sensors for these DTCs.
For claiming, use causal part 6M280 and applicable labor operations in Section 06 of the Service Labor Time Standards (SLTS) Manual.
Engineering is investigating, monitor OASIS for updates.
FORD | F-150 | 2018 |
SSM 47441
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Mobil 1 advanced full-synthetic motor oil 5W-20 utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness.
- Helps protect critical engine parts for up to 10,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Designed for vehicles with 75,000 miles or more, Valvoline MaxLife Full Synthetic High Mileage Motor Oil helps maximize engine life and performance for the many miles still ahead
- Formulated with seal conditioners to help prevent oil leaks, reduce oil consumption, and improve fuel economy
- Delivers 50% stronger wear protection than industry standards for superior defense against friction and wear
- Provides 20% stronger sludge defense than industry standards to protect against harmful buildup and deposits
- Offers 2.5X better heat protection than industry standards to safeguard engines in extreme conditions
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes*
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM ILSAC GF-6 | Meets engine test requirements of Chrysler MS 6395 | Meets Ford WSS-M2C945-B1 | Meets Ford WSS-M2C960-A1
- Or one year, whichever comes first
- Mobil 1 High Mileage full-synthetic motor oil 5W-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
This product presentation was made with AAWP plugin.