NHTSA ID Number: 10140310
Manufacturer Communication Number: TSB18-2025
Summary
Some 2017 Fusion/MKZ vehicles built on or before 12-Jun-2017 may exhibit a driver’s power seat function that is inoperative with or without fuse F74 open. Follow the Service Procedure steps to correct the condition.
2 Affected Products
Vehicles
Model:
2017 Fusion
2017 MKZ
Issue: Some 2017 Fusion/MKZ vehicles built on or before 12-Jun-2017 may exhibit a driver’s power seat function that is inoperative with or without fuse F74 open.
Action: Follow the Service Procedure steps to correct the condition.
Parts
| Description | Quantity | Part Number |
| Coroplast Electrical Wire Harness Tape | 1 | NAI837X
Tesa Wire Loom Harness Tape Used by Mercedes BMW VW Audi by Tesa
|
| Drive | Tool Name |
|---|---|
| 3/8″ | Power Tool |
| 3/8″ | Ratchet |
| 3/8″ | Torque Wrench |
| 3/8″ | Torx Socket T50 |
| 3/8″ | Torx Socket T55 |
| Trim Tool | |
| Push Pin Tool | |
| Soldering Gun | |
| Heat Gun |
Service Procedure
1. Check the vehicle build date. Was the vehicle built on or before 12-Jun-2017?
(1). Yes – proceed to Step 2.
(2). No – this article does not apply.
2. Visually inspect the seat wiring harness by looking from the front, under the driver’s seat. When looking from the front under the seat the chafe point is located on the left side and is rubbing on the seat adjustment framing. Is there chafing to the wire harness? (Figures 1 – 2)
(1). Yes – proceed to Step 3.
(2). No – this article does not apply. Refer to Workshop Manual (WSM), Section 501-10.
Figure 1
Figure 2
3. Remove the seat. Refer to WSM, Section 501-10.
4. Repair the wire concern. Refer to cell 5 in the Wiring Diagram (WD). The wire harness should also be wrapped with Coroplast wire harness tape or equivalent available from the Rotunda Technician Tool Program (RTTP).
5. Relocate the wire harness clip from the seat frame and attached it to the track sinuous wire. (Figures 3 – 4)
Figure 3
Figure 4
6. Reinstall the seat. Refer to WSM, Section 501-10.
SEOCONTENT-START
TECHNICAL SERVICE BULLETIN
2017 Driver’s Power Seat Function Inoperative – Built On Or Before 12-Jun-2017
Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
Labor Times
| Description | Operation No. | Time |
| 2017 Fusion/MKZ: Visually Inspect And Repair Wire Harness Includes Time To Remove And Install Seat (Do Not Use With Any Other Labor Operations) | 182025A | 0.8 |
Repair/Claim Coding
| Causal Part: | 14D231 |
| Condition Code: | 30 |
SEOCONTENT-END
1 Associated Document
NHTSA ID Number: 10138511
Manufacturer Communication Number: TSB18-2025
Summary
Some 2017 Fusion/MKZ vehicles built on or before 12-Jun-2017 may exhibit a driver’s power seat function that is inoperative with or without fuse F74 open. Follow the Service Procedure steps to correct the condition.
1 Associated Document
Manufacturer Communications
18-2025
25 January 2018
MC-10138511-9999.pdf 159.824KB
- Widely application: The material of wire harness cloth tape is soft and corrosion-resistant, which is suitable for the use of wire harness in automobile interior noise reduction part, such as wire harness of the dashboard, main harness wound and applied for wire joint and wire fixing; It can also sort out home appliance wiring and more
- Easy to tear: Just stick one end of tape to cable, start pulling and wrapping onto the cable and tear it gently; No need scissors and other tools; You can decide the length of the wire cloth tape according to you needs
- Professional cloth tape material: It is made of polyester non-woven fabric and strong acrylic pressure sensitive adhesive; High viscosity, high temperature resistance ( -40°F to 221°F ), well seal and excellent flexibility
- Excellent performance: The wiring harness tape maintains features good noise reduction, hand tearable and heat insulation performance, and wear resistance; It is suitable for electrical automotive engine and circuit maintenance to achieve the purpose of insulation protection
- Specification: A set of 5 rolls wire harness cloth tap; SIZE: Each roll black electrical harness tape is 50 FT long and 3/4 inch wide; It is work for your different daily needs in diversified use scenarios
- High temp Wire Harness Automotive Cloth Tape with excellent sound and rattle dampening performance. Lessens coil whining and lasts well against elevated temperatures (-40℉ - 257℉).
- Sports a race-spec heavy-duty bundling performance but cleanly tears with just bare hands, EMPOWERING average car owners with LITTLE TO NO EXPERIENCE in automotive maintenance to achieve PROFESSIONAL-GRADE results in function and form.
- This Wire Loom Tape features an extremely strong adhesive but does not turn into a messy goo. Rated to last up to 6 years and can easily get you through 150k miles of mileage.
- Its bi-directional weave makes it puncture-resistant and abrasion and corrosion-resistant. This automotive felt tape preserves cables in their pristine condition.
- This engine tape wrap is similar, if not better, in thickness, tensile strength and looks with OEM wire harness tapes. Extra-sticky adhesive enables users to bundle hard-to-reach cables quickly.
- High temp Wire Harness Automotive Cloth Tape with excellent sound and rattle dampening performance. Lessens coil whining and lasts well against elevated temperatures (-40℉ - 257℉).
- Sports a race-spec heavy-duty bundling performance but cleanly tears with just bare hands, EMPOWERING average car owners with LITTLE TO NO EXPERIENCE in automotive maintenance to achieve PROFESSIONAL-GRADE results in function and form.
- This Wire Loom Tape features an extremely strong adhesive but does not turn into a messy goo. Rated to last up to 6 years and can easily get you through 150k miles of mileage.
- Its bi-directional weave makes it puncture-resistant and abrasion and corrosion-resistant. This automotive felt tape preserves cables in their pristine condition.
- This engine tape wrap is similar, if not better, in thickness, tensile strength and looks with OEM wire harness tapes. Extra-sticky adhesive enables users to bundle hard-to-reach cables quickly.
- Extreme-temperature resistant & Noise/Vibration Reduction: The high temp automotive fabric wiring harness tape withstands a wide temperature range from -40°F to 257°F and offers excellent flame-retardant performance — flame will self-extinguish within 30s. It effectively reduces rattling, vibrations, and noise inside the vehicle or within electrical components. Additionally, its wear-resistant properties enhance cable durability.
- Durable Materials: Made from polyester non-woven fabric and strong pressure-sensitive acrylic adhesive, this cloth electrical tape automotive provides excellent sealing and flexibility. Its adhesion strengthens over time and lasts up to 6 years. Plus, it removes cleanly with no solvent residue, leaving surfaces spotless. Suitable for both home and industrial use.
- Wide Applications: The fabric electrical tape for virtually any wiring job — from automotive harnesses (engine compartment, dashboard, doors, roof, chassis, bumper, trunk) to home appliances (AC, fridge, washer, computer), industrial equipment, and even daily DIY repairs.
- Easy to Tear: Just wrap the cloth wire harness tape around the cable, stretch it to the desired length, and then simply tear it off with your hands. No need for any additional tools, and you can achieve a clean and quick wire harness wrap.
- Specification: Each roll measures of high temp electrical tape is 50 ft x 3/4 in. Available in 2-pack, 4-pack(with 10 cable ties), 6-pack(with 20 cable ties), or 11-pack(with 40 cable ties). Black blends seamlessly with engine bays and electronic setups. Professional-grade thickness ensures reliable insulation and wear resistance. Stock up for multiple cars or ongoing DIY projects.
- High temp Wire Harness Automotive Cloth Tape with excellent sound and rattle dampening performance. Lessens coil whining and lasts well against elevated temperatures (-40℉ - 257℉).
- Sports a race-spec heavy-duty bundling performance but cleanly tears with just bare hands, EMPOWERING average car owners with LITTLE TO NO EXPERIENCE in automotive maintenance to achieve PROFESSIONAL-GRADE results in function and form.
- This Wire Loom Tape features an extremely strong adhesive but does not turn into a messy goo. Rated to last up to 6 years and can easily get you through 150k miles of mileage.
- Its bi-directional weave makes it puncture-resistant and abrasion and corrosion-resistant. This automotive felt tape preserves cables in their pristine condition.
- This engine tape wrap is similar, if not better, in thickness, tensile strength and looks with OEM wire harness tapes. Extra-sticky adhesive enables users to bundle hard-to-reach cables quickly.
This product presentation was made with AAWP plugin.