SSM 47119 – 2011-2018 Explorer/Police Interceptor Utility/Police Interceptor Sedan Taurus/Flex/MKT and 2011-2016 MKS – 3.5L EcoBoost – Engine Assembly Replacement
During 3.5L EcoBoost engine assembly replacement, inspect the color of the positive crank ventilation (PCV) camshaft cover adaptor located next to the high pressure fuel pump on the original engine and compare to the service replacement engine.
The adaptor color of the service replacement engine must match the original engine.
If the adaptor on the original engine is green, install a green adaptor (HL2E-6762-AA) on the service replacement engine.
If the adapter is removed from the camshaft cover, damage will occur to the adapter locking mechanism.
Make sure detached pieces of the locking mechanism do not fall into the open port during removal.
APPLICABLE VEHICLES
2013 – 2018 TRUCK: UB EXPLORER
2011 – 2018 TRUCK: P3 FLEX (FORD
C/O UTILITY)
2011 – 2016 CAR: LE LINCOLN MKS-SWB/LWB
2011 – 2018 TRUCK: P4 MKT (LINCOLN C/O UTILITY)
2011 – 2018 CAR: PH TAURUS
2011 – 2018 CAR: PH TAURUS
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- As measured in Sequence VH sludge test vs. API SP limits
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Delivers 40% stronger wear protection than industry standards to reduce friction and improve fuel economy
- Provides 15% better deposit defense vs. industry standards, keeping engines cleaner for smoother performance and longer-lasting protection
- Up to 2.5X better heat protection vs. industry standards to fight harmful sludge formation and thermal breakdown
- Engineered for excellent low-temperature flow, reducing metal-to-metal contact during cold starts — when most engine wear typically occurs
- Mobil 1 High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards* | Seal conditioners to help reduce leaks
- Advanced additives that help prevent engine wear | Improved Fuel Economy**
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets Ford WSS-M2C946-B1 | Meets Ford WSS-M2C961-A1 | * Based on API and ACEA volatility specifications | ** In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes.*
- Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
This product presentation was made with AAWP plugin.