NHTSA ID Number: 10115957
Manufacturer Communication Number: SSM 46708
Summary
Some 2017 F-150/Raptor vehicles equipped with a 10R80 transmission built on or before 22-May-2017 may exhibit unable to shift the transmission out of park and possible no crank. This may be due to an undersized manual shaft-to-TR sensor roll pin becoming dislodged. Discard old manual control shaft-to-TR sensor roll pin and install a new longer manual control shaft-to-TR sensor roll pin 9L8Z-7G100-A and set roll pin installed height to 10mm above TR sensor hub. Refer to Workshop Manual (WSM) Section, 307-01. For claiming, use causal part 7G100 and applicable labor operations in section 7 of the service labor time standards (SLTS) manual.
1 Affected Product
Vehicle
FORD | F-150 | 2017 |
SSM 46708
- Motorcraft Transmission Fluid - XT105Q3LV
- Item Package Dimension: 12.009L x 8.49W x 4.489H inches
- Item Package Weight - 9.23 Pounds
- Item Package Quantity - 1
- Product Type - AUTO ACCESSORY
- Manufactured with high-viscosity index, premium-quality, hydroprocessed base oils and specially designed performance additives
- Provides excellent shifting characteristics at high and low ambient temperatures, and guards against transmission shudder
- Offers excellent thermal, oxidation and shear stability, as well as good low-temperature fluidity
- Provides wear protection and inhibits the formation of gum, sludge, lacquer and foam
- Helps prevent rust and corrosion Dyed red for easy leak detection
- Provides excellent performance in electronically controlled automatic transmissions. Dyed red for easy leak detection
- Manufactured with high-viscosity index, premium-quality, hydroprocessed base oils and specially designed performance additives. Helps prevent rust and corrosion
- Provides excellent shifting characteristics at high and low ambient temperatures, and guards against transmission shudder
- Offers excellent thermal, oxidation and shear stability, as well as good low-temperature fluidity. Provides wear protection and inhibits the formation of gum, sludge, lacquer and foam
- Not for use in applications where MERCON V, MERCON SP, Continuously Variable Chain Type Transmission Fluid, Motorcraft Premium Automatic Transmission Fluid, FNR5 Automatic Transmission Fluid or Type F Automatic Transmission Fluid is recommended
- For use in 95% of vehicles including most CVTs in operation with US registered light duty applications
- High performance conditioning agents prolong seal elasticity to prevent leaks
- Improved durability & transmission life with anti-wear technology to avoid costly repairs
- Enhanced high & low temp performance supports transmission fluid in all weather situations
- Full synthetic formula with advanced additives protects against transmission breakdown better than conventional fluids
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
This product presentation was made with AAWP plugin.