2005-2008 Remanufactured 5.4L 3v and 6.8L 3v – Ignition Coil Boots Included with Engine Packaging.
When ordering a 2005 to 2008 remanufactured 5.4L 3v or 6.8L 3v engine, spark plug boots may be provided in the packaging.
Replace all black spark plug boots from the original engine with the ‘brown’ spark plug boots, as provided.
The updated ‘brown’ spark plug boots are longer than the black boots to accommodate a running change in the spark plug length.
The ignition coil bodies and spring/resistor are transferable and only the rubber boots require replacement.
Failure to install the spark plug boots provided with the replacement engine could lead to drivability concerns.
- Simple, high quality tool designed to test high energy electronic ignition (HEI) systems
- Simply attach plug wire to end then use built in clip to attach to ground
- Tester will give you true spark performance results, helping you identify ignition anomalies that simply removing a plug and grounding it won't reveal
- For use on vehicles and power equipment equipped with a high energy ignition system
- package height : 11.988 cm
- package length : 3.378 cm
- package width : 8.483 cm
- Product type : AUTO ACCESSORY
- Use to test spark plug circuits, electronic fuel injection signals and idle air control circuits.
- Quickly diagnose "no start" and engine miss conditions in the electrical fuel injection and spark plug circuits.
- Analyze rough running engines.
- Includes: Cat. No. 23970, In-Line Spark Checker Kit for Recessed plugs (A must for testing newer vehicles with recessed spark plugs plus conventional and coil-on plug ignition systems); 8 Noid Lights (for checking GM PFI, FORD
TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI, BOSCH 2 and GM Multec 2); and 2 IAC Test Lights (for straight and 90° applications). - Supplied with instructions in a durable, plastic molded storage case.
This product presentation was made with AAWP plugin.


