Multiple Vehicles – Surface Preparation For Oil Leaks
See GSB: G0000166 for details.
| General Service Bulletin (GSB): | Surface Preparation for Oil Leaks |
| GSB Overview: | This document provides information regarding the usage of Metal Surface Prep Wipes for resealing of engine oil leaks. |
| NOTE: This information is not intended to replace or supersede any warranty, parts and service policy, Work Shop Manual (WSM) procedures, technical training or wiring diagram information. | |
Overview:
- When cleaning engine gasket sealing surfaces or cleaning parts from an engine that are to be resealed, do not use surface conditioning discs. These discs can cause damage to the sealing surface or generate debris that will cause damage to the sealing surfaces in cast iron and aluminum engine parts.
- Improper cleaning and surface preparation will not allow the new sealant to adhere to the engine component’s resulting in oil leaks and repeat repairs.
- To properly clean the sealing surface prior to reassembly, use the required Silicone Gasket Remover, part number ZC-30-A
. Allow it to soak in for several minutes to loosen the old RTV sealer/gasket material before using a non-metallic scraper to remove all loose sealer/gasket material.
Surface Preparation for Oil Leaks
- Metal Surface Wipes are now available for engine oil leak reassembly prep.
- Motorcraft Metal Surface Prep Wipes is a pre-saturated disposable wipe to be used as a final step in surface preparation. It creates a conversion coating providing an improved base for RTV sealing. The wipe is a dry-in-place application and does not require rinsing.
- The new Metal Surface Wipes Part number ZC-31-B.
New Surface Prep Procedure:
- Refer to Workshop Manual (WSM), Section 303-00. Under General Procedures, locate the RTV Sealing Surface Cleaning and Preparation Section.
- Special attention should be used at T-Joint locations for cleanliness and silicone application. Follow the appropriate workshop manual section for Silicone sealer application.
G0000166
G0000117
G0000111
Bestseller No. 2
Motorcraft - Remover-Silicon (ZC30A)
- Leading Manufacturer Of High-Quality Products
- International Renown For Our Diverse Range Of Award-Winning Products
- All Products Have Been Designed With The Professional In Mind
- Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User
Bestseller No. 3
Genuine Ford Fluid ZC-30 Silicone Gasket Remover - 12 oz.
- Specifically formulated to soften cured RTV and residue left from multi-layer steel gaskets
- Allows removal of gasket residue with a plastic or wood scraper
- Safe for aluminum and cast iron gasket surfaces
- Assures a safe cleaning process without risk of damaging the sealing surface
- Eliminates the need for metal tools or abrasives for removing gasket residue
Bestseller No. 4
Tusk 3-Piece Gasket Scraper Kit | 10mm, 15mm, 23mm Sizes | Automotive Motorcycle Powersports Remove Old Gaskets, Silicone, Rust
- Makes removal of old gaskets an easier task.
- Includes 10mm, 15mm and 23mm wide blades.
- Equipped with a comfortable handle for easy grip.
- The sharp blades allow some flex to make them ideal for removing stubborn gaskets from engine components.
- Hole in the handle allows for hanging up and easy storage
Bestseller No. 5
FOSHIO Plastic Razor Blade Scraper Include 2PCS Scraper Tool and 100PCS Blades for Gasket Remover, Labels Decal and Adhesive Remover for Windows and Glass
- Plastic scraper set include 2pcs plastic scraper and 100pcs double edge plastic razor blades
- Plastic Material:It is Light weight and brings the rustproof performance.
- Double Edge Blades - economical and lasting using. You can change the blades quickly and easily with the Blades clip.
- Sharp yet flexible to conform to the surface and protect them from being scraped.
- Scraper heads are angled for better performance, greater control and strength, making scraping projects faster and easier.
This product presentation was made with AAWP plugin.