| TSB 13-9-22 |
|
| Publication Date: September 25, 2013 | |
FORD : | 2012-2013 Fiesta, Focus, Fusion 2012-2014 Mustang 2013 C-MAX, Taurus 2012-2013 E-Series, Edge, Expedition, Explorer, F-150, F-Super Duty 2013 Escape 2013-2014 Flex |
|
LINCOLN: | 2012 MKZ 2012-2013 Navigator |
The article supersedes TSB 13-6-17 to update the vehicle model years and add a production fix dates.
ISSUE:
Various vehicles equipped with SYNC may exhibit concerns related to SYNC features. Refer to the vehicle list to determine applicable vehicle lines and build dates located in the Service Procedure Section along with complete symptom details.
ACTION:
Follow the Service Procedure steps to improve the condition.
SERVICE PROCEDURE
This procedure excludes vehicles equipped with MyFord Touch or MyLincoln Touch.
Symptoms addressed by this procedure include the following:
- All SYNC features inoperative: lack of or slow response to Auxiliary, Phone, and Voice button operation.
- U3000:04 in the Accessory Protocol Interface Module (APIM).
- Intermittent phone connection issues.
- When multiple phones are paired to SYNC, SYNC intermittently does not connect to the device that is set as the Primary phone.
- Incorrect caller ID displayed for text messages.
- Voice recognition system responds Calling Dot at Work.
- Dials the first phone book entry in phone book to all Call commands.
- Apple device connected via USB intermittently does not reconnect and resume playback after ignition cycle, system goes to Line In instead.
- USB over time responds Indexing, Speech control not available with this device, Index Full, or fails to connect to a USB device previously connected without concerns.
| Applicable Vehicles | ||
|---|---|---|
| Model Year(s) | Model Line | Vehicle Built On Or Before Date |
| 2013 | C-MAX | 5/25/2013 |
| 2012-2013 | Focus | 5/25/2013 |
| 2013 | Escape | 6/4/2013 |
| 2012-2013 | Fusion | 5/30/2013 |
| 2013 | Taurus | 6/16/2013 |
| 2013-2014 | Flex | 7/12/2013 |
| 2012-2013 | F-150 | 6/13/2013 |
| 2012-2013 | F-250-550 | 6/13/2013 |
| 2012-2014 | Mustang | 6/18/2013 |
| 2012-2013 | Expedition | 7/19/2013 |
| 2012-2013 | Navigator | 7/19/2013 |
| 2012-2013 | Edge | 7/12/2013 |
| 2012-2013 | Explorer | 6/16/2013 |
| 2012-2013 | E-Series | 6/6/2013 |
| 2012 | MKZ | All |
| 2012-2013 | Fiesta | All |
- Verify if a SYNC update is available. Go to the Professional Technician Society (PTS) website and from the OASIS tab select the SYNC button. Scroll to the bottom of the page, under software update actions, click on the View Latest Software hyper link located next to the standard selection. A software update is identified when there is no check box next to the Customer Interface Processor (CIP)
- Are software updates available?
- No – this article does not apply. Refer to Workshop Manual (WSM), Section 415-00 for normal diagnosis.
- Yes – ensure that the Integrated Diagnostic Software (IDS) release is at 85.01 or higher, then close the IDS software and proceeded to Step 3.
- Reprogram the APIM. To perform the reprogram it will be necessary to follow the online version of the WSM, Section 418-01, for APIM – Standard programming.
WARRANTY STATUS:
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
| OPERATION | DESCRIPTION | TIME |
| 130922A | Reprogram The APIM (Do Not Use With Any Other Labor Operations) | 0.4 Hr. |
DEALER CODING
| BASIC PART NO. | CONDITION CODE |
| 14D212 | 04 |
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
No products found.
Last update on 2026-06-10 / Affiliate links / Images from Amazon Product Advertising API
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
Last update on 2026-06-09 / Affiliate links / Images from Amazon Product Advertising API
No products found.
No products found.
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
www.motorcraftservice.com
Last update on 2026-06-09 / Affiliate links / Images from Amazon Product Advertising API
No products found.
- Delivers serious jump-starting power with 1000 peak amps and 500 instant starting amps
- Reverse polarity alarm alerts when there is an improper connection; Connect the clamps to the battery, turn on the switch and start your vehicle. All Metal Powder Coated Clamps
- Features a 120 PSI air compressor to help inflate tires with low pressure; High-powered LED light rotates 270 degrees to help you work in the dark
- Built-in 12V DC outlet and USB port provide portable power for electronic devices; Includes a limited 1 year manufacturer warranty
- Jump starter should be charged every 30 days when not in use; Charges using a standard household extension cord (sold separately)
Last update on 2026-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.