Instrument Panel Cluster (IPC) Information Display goes Blank Intermittently – 2013 Ford Edge, 2014 Explorer, 2013 Lincoln MKX

“This site contains affiliate links for which OEMDTC may be compensated”
TSB 13-11-18
Publication Date: November 8, 2013

 

FORD: 2013 Edge
2014 Explorer
LINCOLN: 2013 MKX

 

This article supersedes TSB 13-9-21 to update the IDS release.

 

ISSUE:

Some 2013 Edge, MKX and 2014 Explorer vehicles with the single information display in the center of the IPC and built on 6/14/2013 and through 6/28/2013, and vehicles with the dual information displays in the IPC and built on 6/14/2013 and through 8/23/2013 may exhibit a condition where the instrument cluster information display goes blank intermittently.

 

ACTION:

Reprogram the IPC to the latest calibration using IDS release 87.02 or higher. Calibration files may also be obtained at www.motorcraft.com

 

WARRANTY STATUS:

Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.

 

OPERATION DESCRIPTION TIME
131118A 2013 Edge/MKX, 2014 Explorer: Reprogram The IPC (Do Not Use With Any Other Labor Operations) 0.4 Hr.

 

DEALER CODING

BASIC PART NO. CONDITION CODE
10849 04

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [46.64 KB]

 


 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

  • Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
  • Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device Instrument Panel Cluster (IPC) Information Display goes Blank Intermittently - 2013 Ford Edge, 2014 Explorer, 2013 Lincoln MKX | small light Instrument Panel Cluster (IPC) Information Display goes Blank Intermittently - 2013 Ford Edge, 2014 Explorer, 2013 Lincoln MKX | small light Instrument Panel Cluster (IPC) Information Display goes Blank Intermittently - 2013 Ford Edge, 2014 Explorer, 2013 Lincoln MKX | small light Instrument Panel Cluster (IPC) Information Display goes Blank Intermittently - 2013 Ford Edge, 2014 Explorer, 2013 Lincoln MKX | small light using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com

 

Leave a Comment

2
Share to...