SSM 46891 – 2016 Escape/Focus – Front Control Display Interface Module (FCDIM) – Unable To Store AM/FM Presets And/Or Preset Buttons Work Erratically
Some 2016 Escape and Focus vehicles equipped with a front control display interface module (FCDIM) may exhibit the inability to store AM/FM presets and/or preset buttons work erratically.
Engineering is currently investigating this concern.
Until a new service procedure and/or parts are available use the pre-set buttons in the following manner.
To store/program a new station for a pre-set location, press and hold desired button for 3 seconds.
To select a previously programmed pre-set location, perform a quick press and release of the button.
Refer to Workshop Manual (WSM) Section, 415-00 for normal diagnostics.
Continue to monitor OASIS for updates.
APPLICABLE VEHICLES
2016 CAR: DH C346 FOCUS FNA
2016 TRUCK: M2 C520 NA (ESCAPE)
- DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
- SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
- INPUTS/OUTPUTS: RCA & Speaker Level Inputs
- WARRANTY: BOSS Audio Systems provides a powerful 6-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
- 23% Increase of Thermal Mass Per Square Inch
- Small Chassis Design
- OEM Vehicle Integration
- POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db.
This product presentation was made with AAWP plugin.