2010-2012 – Taurus, MKS, MKT And Flex – 3.5L GTDI Long Block Replacement Service Tips
3.5L GTDI replacement long block (6006) engines are shipped with the 2013-2014 cam sensors (6A257), crank sensor (6C315), crank sensor tone wheel (12A227) and coolant inlet tube (8A505).
If you are installing a replacement long block engine into a 2010-2012 Taurus, MKS, MKT or Flex vehicle equipped with a 3.5L GTDI engine, the components listed above must be swapped over from the original engine to the replacement long block before the engine is installed into the vehicle.
Failing to swap the cam sensors, crank sensor, crankshaft tone wheel and coolant inlet tube before the engine is installed will require the engine to be removed again to complete the repair.
- Mobil 1 advanced full-synthetic motor oil 5W-20 utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness.
- Helps protect critical engine parts for up to 10,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
Last update on 2026-05-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.