NHTSA ID Number: 10218620
Manufacturer Communication Number: TSB 22-2321
Summary
Some 2015-2022 Transit vehicles may experience a snap, click and/or pop noise from the door check when opening/closing the front door(s). This may be due to a cracked/broken door check and/or fastener. To correct the condition, follow the Service Procedure to inspect/replace the front door check and/or fastener.
Model:
| Ford
2015-2022 Transit |
Issue: Some 2015-2022 Transit vehicles may experience a snap, click and/or pop noise from the door check when opening/closing the front door(s). This may be due to a cracked/broken door check and/or fastener. To correct the condition, follow the Service Procedure to inspect/replace the front door check and/or fastener.
Action: Follow the Service Procedure to correct the condition if the vehicle meets the following criteria:
- 2015-2022 Transit
- At least one of the following conditions:
- Snap, click and/or pop noise from the front door check when opening/closing
- The door check and/or fastener is cracked/broken
Parts
| Service Part Number | Quantity | Description | Unit of Issue | Piece Quantity |
| BK3Z-6123500-E | 1 | Door Check | 1 | 1 |
| W720428-S450B | 1 | Fastener | 1 | 1 |
TA-26
Motorcraft #ta26 Adhesive (ta26)
| As Needed | Motorcraft® Threadlock 262 |
Quantity refers to the amount of the service part number required to repair the vehicle.
Unit of Issue refers to the number of individual pieces included in a service part number package.
Piece Quantity refers to the total number of individual pieces required to repair the vehicle.
As Needed indicates the amount of the part may vary and/or is not a whole number. Parts can be billed out as non-whole numbers, including less than 1.
Service Procedure
1. Inspect the door check. (Figure 1) Is the door check cracked/broken?
Figure 1
(1). Yes – replace the door check and fastener. Refer to Workshop Manual (WSM), Section 501-03 Body Closures. Proceed to Step 2.
(2). No – replace only the fastener. Proceed to Step 2.
2. Partially install the door check and fastener. (Figure 2)
Figure 2
3. Apply 2-3 drops of Motorcraft® Threadlock 262 to the fastener. (Figure 3-4)
Figure 3
Figure 4
4. Tighten the door check fastener to 22 lb-ft (30 Nm).
5. Reinstall the front door trim panel. Refer to WSM, Section 501-05 Interior Trim and Ornamentation.
8 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| FORD | TRANSIT | 2015-2022 |
1 Associated Document
Manufacturer Communications
22-2321
10 August 2022
MC-10218620-0001.pdf 159.308KB
- Lock and Seal Fasteners: Prevents loosening of metal fasteners caused by vibration on small motors, mowers, and power equipment
- Prevents Rust and Corrosion: Protects from leaks, rusting, and corrosion and eliminates need to stock up on expensive lock nuts and washers
- Removable: Can be removed with hand tools
- Easy and Quick: Sets in 10 minutes and fully cures in 24 hours
- For 6-19mm Fasteners: Medium-strength formula for use on threads for 6mm to 19mm nuts and bolts
- ELIMINATE SPILLS WITH PATIENCE: GH1200 thread lock gives you the luxury to get rid of messy spills and wasted time cleaning up after unreliable applicators. Our product features a robust, precision-engineered nozzle that ensures a clean, controlled application, preventing leaks. keep your project area spotless with our Seal Fasteners threadlocker.
- STOP LEAKS AND FRUSTRATION: Our Seal Fasteners thread locker saves you from leaky valves, drips from loose water pumps & loose bolts in machinery. Our threadlocker forms a secure, long-lasting bond that prevents leaks, vibrations, and loosening. Keep your projects secure and frustration-free with GH1200 thread locker.
- NEVER RUN OUT: This convenient pack of threadlock provides high strength.The threadlocker offer the perfect solution for all your fastening needs. you'll have plenty on hand for various projects without worrying about running out anytime soon.
- SECURE PROJECTS FOR LONG HAUL: Our thread lock creates a powerful bond. The screw lock prevents loosening,. even under heavy loads and frequent use. Our thread lock gives you the peace of mind knowing your projects are built to last, without the constant worry of parts coming loose.
- VERSATILITY YOU CAN COUNT ON: From intricate automotive components to everyday household repairs our liquid thread lock is your one-stop solution for a wide range of applications. The fast-curing formula of thread lock works effectively on all types of fasteners, metals, and threaded connections. GH1200 thread locker automotive is the perfect addition to any toolbox.
- Threadlocker: Thread locker has strong adhesion and can fix screws, nuts, and metal fasteners to prevent loosening due to vibration
- Sealing and leakage prevention: Using thread locker cores instead of solid gaskets, close contact, perfect sealing, and effective leakage prevention
- Prevents Rust and Corrosion: Protects from leaks, rusting, and corrosion and eliminates need to stock up on expensive lock nuts and washers
- Easy to use: Simply apply the threadlocker evenly to the thread, tighten the nut, and cure initially for 20 minutes, then fully cure within 24 hours
- Wide application: Whether you're installing a valve cover, water pump, or just tightening down some furniture screws, blue threadlocker has you covered. Our screw glue can be used on a variety of automotive, industrial and furniture applications
SEOCONTENT-START
TECHNICAL SERVICE BULLETIN Snap, Click And/Or Pop Noise From The Door Check When Opening/Closing The Front Door(s) 22-2321 10 August 2022 Model: Ford 2015-2022 Transit Issue: Some 2015-2022 Transit vehicles may experience a snap, click and/or pop noise from the door check when opening/closing the front door(s). This may be due to a cracked/broken door check and/or fastener. To correct the condition, follow the Service Procedure to inspect/replace the front door check and/or fastener. Action: Follow the Service Procedure to correct the condition if the vehicle meets the following criteria: • 2015-2022 Transit • At least one of the following conditions: – Snap, click and/or pop noise from the front door check when opening/closing – The door check and/or fastener is cracked/broken Parts Service Part Number Quantity Description Unit of Issue Piece Quantity BK3Z-6123500-E 1 Door Check 1 1 W720428-S450B 1 Fastener 1 1 TA-26 As Needed Motorcraft® Threadlock 262 Quantity refers to the amount of the service part number required to repair the vehicle. Unit of Issue refers to the number of individual pieces included in a service part number package. Piece Quantity refers to the total number of individual pieces required to repair the vehicle. As Needed indicates the amount of the part may vary and/or is not a whole number. Parts can be billed out as non- whole numbers, including less than 1. Warranty Status: Eligible under provisions of New Vehicle Limited Warranty (NVLW)/Service Part Warranty (SPW)/Special Service Part (SSP)/Extended Service Plan (ESP) coverage. Limits/policies/prior approvals are not altered by a TSB. NVLW/SPW/SSP/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool. Labor Times Description 2015-2022 Transit: Inspect (Pass) Replace Door Check Retainer(s) One Or Both Front Doors (Do Not Use With Any Other Labor Operations) 2015-2022 Transit: Inspect (Fail) Replace One (1) Door Check And Retainers In Both (2) Front Doors (Do Not Use With Any Other Labor Operations) 2015-2022 Transit: Inspect (Fail) Replace Both (2) Door Check And Retainers In Both (2) Front Doors (Do Not Use With Any Other Labor Operations) Operation No. 222321A 222321B 222321C Time 0.3 Hrs. 0.6 Hrs. 1.0 Hrs. Repair/Claim Coding Causal Part: 6123500 Condition Code: 24 Service Procedure 1. Inspect the door check. (Figure 1) Is the door check cracked/broken? Figure 1 (1). Yes – replace the door check and fastener. Refer to Workshop Manual (WSM), Section 501-03 Body Closures. Proceed to Step 2. (2). No – replace only the fastener. Proceed to Step 2. 2. Partially install the door check and fastener. (Figure 2) Figure 2 3. Apply 2-3 drops of Motorcraft® Threadlock 262 to the fastener. (Figure 3-4) Figure 3 Figure 4 4. Tighten the door check fastener to 22 lb-ft (30 Nm). 5. Reinstall the front door trim panel. Refer to WSM, Section 501-05 Interior Trim and Ornamentation. © 2022 Ford Motor Company All rights reserved. NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge, tools, and equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by “do-it-yourselfers”. Do not assume that a condition described affects your car or truck. Contact a Ford or Lincoln dealership to determine whether the Bulletin applies to your vehicle. Warranty Policy and Extended Service Plan documentation determine Warranty and/or Extended Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service Bulletin (TSB) was current at the time of printing. Ford Motor Company reserves the right de this information with updates. The most recent information is available through Ford Motor Company’s on-line technical resources.
SEOCONTENT-END
This product presentation was made with AAWP plugin.