NHTSA ID Number: 10210245
Manufacturer Communication Number: SSM 50672
Summary
Some 2018-2022 Mustang vehicles (Non-Shelby) and built at Flat Rock Assembly may experience a clunk/pop type noise when turning the steering wheel. This may be due to an incorrectly installed upper spring seat which is part of the front strut assembly. To correct this condition, remove the suspect strut(s) from the vehicle and inspect the upper spring seat for damage and/or incorrect installation and repair as necessary. Refer to Workshop Manual, Section 204-01. For claiming, use casual part 18124 and the applicable labor operations of Section 03 of the Service Labor Time Standards (SLTS) Manual.
APPLICABLE VEHICLES
2018 – 2022 CAR: ZG S550N MUSTANG
5 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
FORD | MUSTANG | 2018-2022 |
1 Associated Document
Manufacturer Communications
SSM 50672 – 2018-2022 Mustang (Non-Shelby) – Clunk/Pop Noise When Turning
MC-10210245-0001.pdf 114.383KB
Bestseller No. 1
Detroit Axle - Front End 14pc Suspension Kit for 2005-2010 Ford Mustang
- Suspension Kit Replacement for Ford 2005-2009 Mustang (GT, Base) - [for Ford 2010 Mustang (Base, GT; Built Before 08/03/2009)]
- Suspension Kit Includes: 2x Front Quick Install Ready Struts + 2x Rear Shock Absorbers + 2x Front Lower Control Arms + 2x Front Sway Bar Links + 2x Inner Tie Rods + 2x Outer Tie Rods + 2x Rack & Pinion Tie Rod Boots & Bellows w/ Locking C-Clamps
- Detroit Axle Suspension components are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks, and SUVs
- Undergo impact, wear, and fatigue testing to help ensure quality and durability
- 10-YEAR WARRANTY!
SaleBestseller No. 2
maXpeedingrods T6 Upgraded Coilover for Ford Mustang S-197 2005-2014
- 【Fit Perfectly】for Ford Mustang S-197 2005-2014; for Ford Mustang GT S-197 2005-2014
- 【Street Performance T6 Series】 Suitable for street performance driving, upgraded damper knob (easier to adjust), high-quality damping oil with better viscosity, upgraded full aluminum plates. Achieve the balance between comfort, speed and safety
- 【24 Levels Adjustable Damper for More Control】 Level 0-8 suggest for street use；Level 9-16 suggest for mountain use；Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs
- 【High Tensile Spring】 Spring rate Front: 8 kg/mm (448 lbs/in) & Rear: 6 kg/mm (336 lbs/in) with spring preload: 7-10 mm. High tensile performance spring - stress tested over 600,000 times while the spring distortion is less than 0.04%
- 【Adjustable Height】 Thread-type ride height adjustment for 1-3 inches(does not keep the original ride height), allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response
Bestseller No. 3
maXpeedingrods Coilovers for Ford Mustang S-197 2005-2014
- 【Fit Perfectly】for Ford Mustang S-197 2005-2014, for Ford Mustang GT S-197 2005-2014, Note:not fit Shelby GT500 Models
- 【High Tensile Spring】Front: 8kg/mm (448 lbs/in) & Rear: 6kg/mm (336 lbs/in);. Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance
- 【Lower Height】The ride height is adjustable for 1-3 inches(not keep to original ride height), allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response
- 【Factory Preset Damping Value】Maintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system
- 【Excellent Material】The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation
Bestseller No. 4
TRQ Front Steering & Suspension Kit Control Arm with Ball Joint Sway Bar
- Kit Includes: 2 Front Inner Tie Rods; 2 Front Lower Forward Control Arms with Ball Joints; 2 Front Lower Rearward Control Arms with Ball Joints; 2 Front Outer Tie Rods; 2 Front Sway Bar Links
- Reference Numbers: FR3Z 3A130-A; FR3Z 5K483-A; FR3Z-3078-B; FR3Z-3079-B; FR3Z-3079A; FR3Z3078A; FR3Z3078B; FR3Z3079A; FR3Z3079B; FR3Z3280A; FR3Z3280C; FR3Z3A130A; FR3Z5K483A; GR3Z3280B; GR3Z3280C; MCS190146; MCS190147; MEF305; MEF314; MEF386; 2653343
- YOUR TRUSTED DIY VIDEO SOURCE: TRQ offers the largest catalog of DIY videos for replacement parts, making installation easier and repairs more accessible. Our mission is to help you "View Before You Do," with hundreds of new videos added weekly.
- TRUST & COMPATIBILITY: For over 25 years, TRQ has been the premium choice for direct-fit replacement parts. Confirm fitment with the Amazon Garage "confirmed fit" feature and review our full compatibility chart below before purchase.
- EASE OF INSTALLATION: Save time and effort with pre-assembled components designed as direct replacements for the original equipment, ensuring precise fit and eliminating the need for modifications.
Bestseller No. 5
Detroit Axle - 12pc Front End Suspension Kit for Ford 1994-2004 Mustang
- Replacement for 1994-2004 Ford Mustang
- Kit Includes: 2x Front Lower Control Arms with Ball Joints + 2x Front Sway Bar End Links + 4x Front Inner Outer Tie Rods + 2x Front Wheel Hub and Bearings + 2x Boots
- Hub Specifications: Position: Front| Lugs: 5 Bolt| ABS Type: Tone Ring
- Undergo impact, wear, and fatigue testing to help ensure quality and durability
- 10-Year Warranty
This product presentation was made with AAWP plugin.