NHTSA ID Number: 10207050
Manufacturer Communication Number: SSM 50380
Summary
Some 2020-2022 F-Super Duty pickup vehicles equipped with a 6.7L engine, 175 inch wheelbase, and built on or before 23-Sep-2021 may exhibit a thump/whine/knock noise from the midship fuel tank at idle or during key on, engine off (KOEO) after performing TSB 21-2057. The noise may be more pronounced at fuel levels at or below 1/4 tank. This may be due to the fuel pump. To correct the condition, replace the fuel pump and sender assembly with service part HC3Z-9H307-AP. For claiming, use causal part 9H307 and applicable labor operations in Section 08 of the Service Labor Time Standards (SLTS) Manual.
APPLICABLE VEHICLES
2020 – 2021 TRUCK: FE P558N SUPER DUTY
2022 TRUCK: FE P558N SUPER DUTY
12 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FORD | F-250 SD | 2020-2022 |
| FORD | F-350 SD | 2020-2022 |
| FORD | F-450 SD | 2020-2022 |
| FORD | F-550 SD | 2020-2022 |
1 Associated Document
Manufacturer Communications
SSM 50380 – 2020-2022 F-Super Duty – 6.7L – 175 inch Wheelbase – Thump/Whine/Knock Noise From The Fuel Tank After Performing TSB 21-2057 – Built On Or Before 23-Sep-2021
MC-10207050-0001.pdf 117.043KB
- Better Media, Longer Life: A three-layer pleated cellulose glass media traps the fine rust and grit that budget filters let slip past, and the large-capacity pleats hold more before the flow drops off.
- Fits Your 6.7 Powerstroke: Confirmed for 2017 through 2026 Ford 6.7L Powerstroke F-250, F-350, and F-450. Order by your model year and this is the correct fuel and water separator for your truck.
- How It Works: Doc's Fuel Filters remove contaminants like separate water from dirt, rust, and debris, protecting fuel system components and ensuring peak engine performance.
- Meets The SAE J1985 Standard: Efficiency is confirmed by an independent lab, not an in-house number, and the high-strength carbon steel housing is built to take the pressure of a 6.7L fuel system.
- Ready To Install: Each filter ships with the o-rings you need, so there is nothing extra to buy. Change it every 5,000 to 10,000 miles, 15,000 at the outside, per your vehicle manufacturer's schedule.
- Package Dimensions: 25.908 H x 17.018 L x 21.59 W (centimeters)
- Fit type: Vehicle Specific
- Country of Origin: United States
- Third-Party Tested Efficiency: Independent testing rates it at 98.84 percent efficiency down to 3 microns, so the number is verified rather than claimed.
- Confirms Your Fit: Built for 2011-2016 Ford 6.7L Powerstroke F250, F350, F450, F550. Use the fitment card on this page to confirm your exact year and configuration before ordering.
- How It Works: Doc's Fuel Filters remove contaminants like separate water from dirt, rust, and debris, protecting fuel system components and ensuring peak engine performance.
- Interchange: Motorcraft FD4615, Wix 33615, Baldwin BF9895, Premium Guard DF4615, Purolator F76160. Confirm your part number before ordering.
- Service Interval: Change according to your vehicle’s manufacturer warranty. Fuel Filters should be changed every 5,000 to 10,000 miles, or 15,000 maximum.
- COMPATIBLE VEHICLES: Fits 2011-2016 Ford F-250, F-350, F-450 and F-550 Super Duty models with the 6.7L Powerstroke V8 diesel engine. Not designed for 2017 or newer Super Duty fuel systems.
- REPLACEMENT NUMBERS: Cross-references FD4615, FD-4615, BC3Z-9N184-B and BC3Z9N184B. Check the number on the removed filter or confirm fitment in Amazon Garage before ordering.
- TWO-STAGE SERVICE KIT: Includes the engine-mounted fuel filter and frame-mounted fuel/water separator element for a complete routine filter service. Sealing components are included as shown in the package images.
- FILTER MEDIA AND SEALING: Pleated filter media helps capture dirt and fuel-system contaminants, while the water-separator stage helps remove moisture. Durable housings and fitted seals support stable fuel flow and leak-resistant installation.
- INSTALLATION & WARRANTY: Install both filters together and follow the vehicle service procedure for seal placement and fuel-system priming. Professional installation is recommended for unfamiliar diesel fuel systems. Includes a 1-year warranty.
- OEM ENGINE PROTECTION – Designed to meet Ford specifications and help protect critical engine and fuel system components.
- HIGH-EFFICIENCY FILTRATION – Helps capture harmful contaminants before they can affect engine performance and reliability.
- DURABLE CONSTRUCTION – Built with quality materials to withstand demanding operating conditions and provide consistent performance throughout the service interval.
- OPTIMIZED PERFORMANCE – Supports proper oil or fuel flow for reliable engine operation and long-lasting protection.
- TRUSTED MOTORCRAFT QUALITY – Genuine Motorcraft part designed to meet Ford performance standards for Ford, Lincoln, and Mercury applications.
This product presentation was made with AAWP plugin.