NHTSA ID Number: 10209218
Manufacturer Communication Number: SSM 50603
Summary
Some 2019-2022 Ranger vehicles may experience condensation from the climate control system dripping on the driver’s side floor and/or the driver’s foot. This may be due to improper or poorly wrapped evaporator lines between the interior bulkhead and the climate control assembly case. Using a flashlight and a mirror, inspect the evaporator lines for being exposed or poorly wrapped. The cut ends of the mastic wrap should be on the top of the lines and have complete coverage. If an issue is found, cover the lines by manipulating the existing mastic wrap, or by adding more mastic to better insulate the lines and limit condensation.
APPLICABLE VEHICLES
2019 – 2022 TRUCK: FG P375N RANGER
4 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| FORD | RANGER | 2019-2022 |
1 Associated Document
Manufacturer Communications
SSM 50603 – 2019-2022 Ranger – Condensation Dripping On Driver’s Side Floor And/Or Driver’sFoot
- Self-fusing Silicone Tape that does not melt up to 260°C (500°F) making it ideal for emergency repairs for automotive, plumbing, marine, hose, electrical, indoor and outdoor applications.
- Silicone rubber has a tensile strength capacity of 900 PSI, giving it superior water and air tight sealing performance for high pressure pipe leakages.
- Corrosion-proof and has high resistance to heat, harsh solvents, chemicals; Meets UL 510 standards and ISO 9001 on Industrial Grade Sealing Application.
- Flexible, Stretchable and conforms even to small pipe diameters, tight corners and cold environments up to -50°C (-60°F)
- Insulates up to 600 volts/mil and dissipates heat generated well so as to resist melting, weathering and tearing.
- SELF-BONDING & PERMANENT SEAL – ARVYNE self-fusing silicone tape bonds to itself without adhesive, creating a watertight, airtight, and long-lasting seal. Ideal for emergency repairs in seconds—no residue, no mess.
- EXTREME TEMPERATURE & ELECTRICAL INSULATION – Rated for continuous use from -76°F to 392°F and insulates up to 8,000 volts per layer. This silicone tape protects your wiring and hoses in harsh environments.
- SUPERIOR TENSILE STRENGTH & DURABILITY – With tensile strength ≥950 PSI and tear resistance ≥85 PPI, our silicone tape meets MIL-I-46852 standards. Great for high-pressure sealing and rugged conditions.
- CHEMICAL, UV & WEATHER RESISTANT – Resistant to oil, fuel, acids, saltwater, solvents, and UV. This silicone fusing tape won’t degrade under sun, moisture, or chemicals. Great for indoor and outdoor use.
- LEAVES NO STICKY RESIDUE – No glue, no fuss. This self-fusing silicone tape removes cleanly with no damage to surfaces. Wrap, seal, and forget—it only bonds to itself, not your tools or hands.
- Easily Seal Outdoor Antenna Coaxial Cable & Electrical Connections from Moisture, Dust and Corrosion
- Thicker, Wider & Stronger Than Other Self-Fusing Silicone Tapes
- Easy to Apply - Easy to Remove - Forms Permanent Bond
- No Messy Adhesive or Glue - Tape Sticks Only to Itself - No Residue when Removed
- Waterproof, UV, Saltwater, Chemical & Temperature Resistant
- Self-fusing Silicone Tape that does not melt up to 260°C (500°F) making it ideal for emergency repairs for automotive, plumbing, marine, hose, electrical, indoor and outdoor applications.
- Silicone rubber has a tensile strength capacity of 900 PSI, giving it superior water and air tight sealing performance for high pressure pipe leakages.
- Corrosion-proof and has high resistance to heat, harsh solvents, chemicals; Meets UL 510 standards and ISO 9001 on Industrial Grade Sealing Application.
- Flexible, Stretchable and conforms even to small pipe diameters, tight corners and cold environments up to -50°C (-60°F)
- Insulates up to 600 volts/mil and dissipates heat generated well so as to resist melting, weathering and tearing.
- Sticks to itself; no mess, no adhesive
- Rapid Sealing Power:** Crafted with 100% Silicone, our tape wraps effortlessly onto itself without the mess of adhesives, providing an immediate airtight and waterproof seal for leaky hoses, pipes, electrical wiring, outdoor coax, and more. No adhesive means it only sticks to itself.
- Versatile Application:** Beyond leak repair, Stretch & Seal tape serves a multitude of purposes - from pipe insulation to radiator hose repair, transformer insulation, tool handle wrap, and more. Works on high pressure applications up to 700psi.
- Heat and Corrosion Resistance:** Resisting salt, oil, and harsh chemicals against corrosion, Stretch & Seal Silicone Tape thrives in indoor and outdoor use, handling temperatures ranging from -65°F-500°F.
- Clean and Residue-Free:** Stretch & Seal is non-reactive, non-adhesive, and leaves behind no sticky residue. It seals tight to itself so it's safe for pipes and storage tanks, offering a seamless repair experience with no cleanup hassle. Stretches up to 300x to tightly wrap around curved surfaces.
Last update on 2026-05-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





