Keyless Entry Keypad Available Separately – 2015 Ford F-150

2015 F-150 Keyless Entry Keypad Available Separately – Not Integral To B-Pillar Trim Panel 2015 F-150 vehicles equipped with keyless entry.   The keyless entry keypad is serviced separately from the B pillar trim panel. If service is required to the keypad it should be ordered separately from the B pillar molding using part number … Read more

Factory Trailer Brake Controller Installation – 2015-2016 Ford F-150

2015-2016 F-150 – Trailer Brake Controller Installation If a Dealership is installing a factory Trailer Brake Controller (TBC) on a 2015-2016 F-150, instructions are available in the Workshop Manual, Section 206-10 or on the Ford Accessories Website.   Once the TBC is installed, use IDS 98.02 or later to configure the Instrument Cluster for TBC … Read more

Factory Trailer Brake Controller Installation – 2011-2014 Ford F-150

2011-2014 F-150 – Trailer Brake Controller Installation If a Dealership is installing a factory Trailer Brake Controller (TBC) on a 2011-2014 F-150, instructions are available in the Workshop Manual, Section 206-10 or on the Ford Accessories Website.   Once TBC is installed, use IDS 70.02 or later to configure the Instrument Cluster (IC) for TBC. … Read more

Front Window Sits Above The Glass Molding After Regulator Replacement – 2011-2014 Ford F-150

2011-2014 F-150 – Front Window Sits Above The Glass Molding After Regulator Replacement Some 2011-2014 F-150 vehicles may exhibit a front window that stops opening approximately 6.35mm-9.52mm (1/4″-3/8″) above the bottom window glass molding after window regulator replacement.   This is a normal operating characteristic of the new power window regulator and motor assembly. The … Read more

Proper Seating of Connector C2280G to the Body Control Module (BCM) – 2011-2014 Ford F-150

Proper Seating of Connector C2280G to the Body Control Module (BCM) GSB Showing how to verify a proper connection of connector C2280G to the Body Control Module (BCM).   See GSB: G0000071 for details.     Service Information & Reprogramming Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), … Read more