Factory Trailer Brake Controller Installation – 2011-2014 Ford F-150

2011-2014 F-150 – Trailer Brake Controller Installation If a Dealership is installing a factory Trailer Brake Controller (TBC) on a 2011-2014 F-150, instructions are available in the Workshop Manual, Section 206-10 or on the Ford Accessories Website.   Once TBC is installed, use IDS 70.02 or later to configure the Instrument Cluster (IC) for TBC. … Read more

Dash Gurgle Noise With A/C On And Blower On Lowest Setting – 2013-2016 Ford Fusion & Lincoln MKZ

2013-2016 Fusion/MKZ – Dash Gurgle Noise With A/C On And Blower On Lowest Setting – Normal Characteristic Some 2013-2016 Fusion/MKZ vehicles may exhibit a gurgle-type noise from the center of the dash at idle when the A/C is on and the blower motor is on the lowest setting.   Prior to performing any repairs, compare … Read more

Front Window Sits Above The Glass Molding After Regulator Replacement – 2011-2014 Ford F-150

2011-2014 F-150 – Front Window Sits Above The Glass Molding After Regulator Replacement Some 2011-2014 F-150 vehicles may exhibit a front window that stops opening approximately 6.35mm-9.52mm (1/4″-3/8″) above the bottom window glass molding after window regulator replacement.   This is a normal operating characteristic of the new power window regulator and motor assembly. The … Read more

Invalid Key Code Is Retrieved From The Key Code Retrieval System – Complete Lock Sets Available – 2013-2016 Ford Fusion & Lincoln MKZ

2016 Ford Fusion

NHTSA ID Number: 10163571 Manufacturer Communication Number: SSM 48067 Summary Some 2013-2016 Fusion and MKZ vehicles may not have a valid 5 digit key code stored in the Ford key code retrieval system. If both keys are lost and the original selling dealer does not have the key code on file, a new lock set may be … Read more

Proper Seating of Connector C2280G to the Body Control Module (BCM) – 2011-2014 Ford F-150

Proper Seating of Connector C2280G to the Body Control Module (BCM) GSB Showing how to verify a proper connection of connector C2280G to the Body Control Module (BCM).   See GSB: G0000071 for details.     Service Information & Reprogramming Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), … Read more