| TSB 14-0156 | 5.0L – INTERMITTENT METALLIC RATTLE OR SCRATCHING TYPE NOISE – WARM ENGINE AT IDLE |
This article supersedes TSBs 12-3-1 and 11-9-15 to consolidate information and update the Service Procedure.
ISSUE:
Some 2011-2012 F-150 and Mustang
vehicles (excluding Boss) equipped with a 5.0L engine may exhibit an intermittent metallic rattle or scratching type noise in the area at the front of the left hand (LH) or driver side cylinder head at idle with the engine at operating temperature.
ACTION:
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
- Determine engine build date. Refer to Workshop Manual (WSM), Section 303-01.
- If engine build date is on or before 11/10/2011, proceed to Step 2.
- If engine build date is on or after 11/11/2011, this article does not apply. Refer to the WSM, Section 303-00 for normal diagnostics.
- Warm the engine to operating temperature.
- Using a mechanic’s stethoscope or EngineEAR, listen for a metallic type rattle or scratching type noise at the front of LH cylinder head. Is the noise heard in areas shown? (Figures 1 and 2)
- Yes – proceed to Step 4.
- No – this article does not apply. Refer to WSM, Section 303-00 for normal diagnostics.
- Remove accessory drive belt, refer to WSM, Section 303-05. Is the noise still present?
- Is the noise heard in the areas shown? (Figures 1 and 2)
- Yes – replace the left hand primary tensioner and timing chain tensioner arm using the kit part number provided in this article. Refer to WSM, Section 303-01.
- No – this article does not apply. Refer to WSM, Section 303-00 for normal diagnostics.
Figure 1 – 14-0156
Figure 2 – 14-0156
| DU7Z-6L266-A | Chain Tensioner Kit |
| ZC-30-A
Genuine Ford Fluid ZC-30 Silicone Gasket Remover - 12 oz.
| Motorcraft Silicone Gasket Remover |
| ZC-31-B
Motorcraft - Towelette-Metal C (ZC31B)
| Motorcraft Metal Surface Prep Wipes |
| TA-30
Ford Genuine Ford Fluid TA-31 RTV Silicone Sealant - 5 oz.
| Motorcraft Silicone Gasket And Sealant |
| BR3Z-8255-A
Ford Seal - THERMOST
| Thermostat Seal |
| F1VY-8507-A
Sale
Genuine Ford Parts - Gasket - Water Pump (F1VY-8507-A)
| Water Pump Gasket |
| BR3Z-6A340-A | Bolt – Crankshaft |
| BR3Z-6020-B
Ford Gasket
| Front Cover Gasket – Left |
| BR3Z-6020-C
Ford Gasket - BR3Z6020C
| Front Cover Gasket – Center |
| BR3Z-6020-D
Ford Gasket - BR3Z6020D
| Front Cover Gasket – Right |
| BR3Z-6584-A
Ford Gasket - BR3Z6584A
| Valve Cover Gasket – Left |
| BR3Z-6584-D
Ford Gasket - BR3Z6584D
| Valve Cover Gasket – Right |
| BR3Z-8620-R | A/C Stretchy Belt |
| BR3Z-8501-H
Ford Pump ASY - WATE
| Water Pump |
| OPERATION | DESCRIPTION | TIME |
|---|---|---|
| 140156A | 2011-2012 F-150 5.0L: Replace The Coolant Pump Includes Time To Diagnose (Do Not Use With Any Other Labor Operations) | 1.5 Hrs. |
| 140156A | 2011-2012 Mustang | 1.7 Hrs. |
| 140156B | 2011-2012 F-150 5.0L: Replace The LH Timing Chain Tensioner And Tensioner Arm Includes Time To Diagnose (Do Not Use With Any Other Labor Operations) | 5.3 Hrs. |
| 140156B | 2011-2012 Mustang | 5.4 Hrs. |
WARRANTY STATUS
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
DEALER CODING
| BASIC PART NO. | CONDITION CODE |
| 8501 | 42 |
- Helps extend engine life, even in severe conditions
- Protects for 15,000 miles – guaranteed*
- Contains additives to help fight sludge
- Keeps your engine running like new
- Better wear protection
- Increased fuel efficiency
- Better protection of the expensive catalytic emission system
- Improved compatibility with fuels containing ethanol
- Superior corrosion protection
This product presentation was made with AAWP plugin.
















