NHTSA ID Number: 10199502
Manufacturer Communication Number: SSM 49931
Summary
Some 2015-2021 Edge, 2016-2018 MKX and 2019-2021 Nautilus vehicles may exhibit a hood bounce or flutter condition at high speeds. This may be due to an incorrect adjustment of the rubber bump stops. To correct this condition, make sure the rubber bump stops are in contact with the inner hood sheet metal. Using a piece of paper between the hood and the rubber hood stop, make sure the paper fits snug with hood closed. For claiming, use causal part number 16612 and applicable labor times from Section 12 of the Service Labor Times Standard (SLTS) Manual.
16 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
SSM 49931 – 2015-2021 Edge, 2016-2018 MKX, 2019-2021 Nautilus – Hood Bounce Or Flutter At High Speeds
- For Ford Bronco 1992-1996; Bronco II 1989-1990; Explorer 2002-2003 1991-1994; Explorer Sport 2001-2003; Explorer Sport Trac 2001-2004; F-150 1992-1996; F-250 1992-1997; F-350 1992-1997; F-450 Super Duty 1992-1997; Mountaineer 2002-2003; Ranger 1989-1997; Town Car 1995-1997
- 2Pcs front hood bumer bump stop buffers
- Part number: 9L3Z-16758-C, 9L3Z16758C
- Positioned on the front, under the hood, left, right, driver side, passenger side
- For Ford F-150 2009-2025
- For Ford Expedition 2018-2024
- Replace Part Number: 9L3416K808AA, 6L3Z16758A, F81Z16758AB, F49Z16758A
- Fits for Ford E-150 2008-2009, for Ford E-250 2008-2009, for Ford
E-350 Super Duty 2008-2009 - Fits for Ford
Excursion 2000-2005, for Ford Explorer 1991-1994, for Ford
F-250 Super Duty 1999-2007 - Fits for Ford F-350 Super Duty 1999-2007, for Ford
Five Hundred 2005-2007, for Ford
Windstar 1995-1998, for Ford Ranger 1998-2011 - Package Includes: 2 pcs Hood Rest Bumper
- Matches OEM 90541-15019: This hood bumper stop rubber corresponds to OEM part number 90541-15019. Length runs 1.40 inches. Width and height both measure 0.86 inches. Two pieces come in each package. Before ordering, confirm that your old part number and dimensions match these figures
- Between Hood and Body: This hood bumper stopper mounts directly between the bumper or hood and the vehicle frame. Closing forces are absorbed on impact. The loud thud is softened. Vibration from metal hitting metal is cut down. Wear caused by direct contact is also reduced
- Weather-Resistant: Premium rubber go into this hood bumper stop rubber. Resistance to weather and compression is built in. The hot engine bay environment is handled without issues. Elasticity stays strong. Shape is maintained. Hardening or deformation does not happen easily
- Blocks Outside Elements: These automotive rubber bumper stops seal out dust, sand, and rainwater. Noise from driving or door closing is also absorbed and dampened. Cabin quietness goes up. Comfort is improved. An essential item for any car owner's maintenance kit
- Remove, Clean, Install: Installation moves quickly. Take out the old hood bumper stopper by unscrewing or pulling. Clean the mounting hole area. Line up the new buffer block. Press or screw it firmly into position. Original cushioning and sealing performance come back right away
- Part Number: CV6Z16758A, CV6Z-16758-A
- Compatible with 2015-2017 Edge, 2013-2017 Escape, 2012-2013 Focus, 2014-2017 Transit Connect, 2015-2017 MKC,2013 C-Max
- Made of high-quality plastic structure, with high reliability, durability and long service life Easy to install
- When the hood rubber general cushion bumper is worn, it will cause noise in the front engine hood and trunk during driving, timely replacement can effectively solve this problem
- Package Includes: 2 x Hood Stop Bumpers Rubber
This product presentation was made with AAWP plugin.





