NHTSA ID Number: 10181869
Manufacturer Communication Number: SSM 49099
Summary
2019-2020 F-150 vehicles equipped with four-wheel drive (4WD) have a revised transfer case control module (TCCM) strategy that will affect integrated wheel end (IWE) operation after initial start-up. The TCCM will not energize the solenoid to supply vacuum to the IWEs after the initial key cycle and a driven gear is selected. The IWEs will remain engaged for 0.8 km (0.5 mi) when the temperature is above 0 deg C (32 deg F) and 3 km (2 mi) when below 0 deg C (32 deg F). The strategy changes were implemented to improve vacuum supply management and axle warm up in cold temperatures. The engine must run for a minimum of 5 minutes to build sufficient vacuum before performing any vacuum related testing. Refer to the Workshop Manual (WSM) Section, 307-08A > Four-Wheel Drive Systems > System Operation and Component Description for additional information.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| FORD | F-150 | 2019-2020 |
Vehicles:
2019-2020 F-150 (P552) (FC)
Symptom Code:
400000 ENGINE
497000 ENGINE NOISE CONCERNS
499000 ENGINE BASIC ENGINE
500000 DRIVELINE
508000 DRIVELINE TRANSFER CASE CONCERNS
597997 DRIVELINE NOISE CONCERNS
700000 NOISE AND VIBRATION
702000 NVH OTHER NOISE CONCERNS
702100 NVH NOISE CONCERN — FRONT
702300 NVH NOISE CONCERN — PASSENGER COMPARTMENT
1 Associated Document
Manufacturer Communications
SSM 49099: 2019-2020 F-150 – 4WD – Electronic Shift On-The-Fly (ESOF) Diagnostic Tips
MC-10181869-0001.pdf 161.589KB
- Fitment: The Auto Locking Hub fit for Ford
Expedition 2003-2015, for Ford F-150 2004-2016, for Ford F-150 Heritage 2004, for Lincoln Mark LT 2006-2008, for Lincoln Mark LT 2010-2014, for Lincoln Navigator 2003-2017. For 4WD (Four Wheel Drive) Models Only. - OE Number: 4 Wheel Drive Locking Hubs replace number is 7L1Z-3C247-A, 7L1Z3C247A
- Function: The 4WD Auto Locking Hub is suitable for 4WD system vehicles, fits both front left or front right wheel hubs, help to solve the problem that the front wheel cannot be locked, the hub makes noise, the hub is locked and fails or cannot be driven.
- Feature: Hub actuators connect the axle shaft to the wheel hub and control power transferred from the axle assembly to the front wheels. Lock Hub Assembly is made of durable material, sealed and leak-proof design to prevent water intrusion, with some grease, the internal diaphragm is not easy to wear or break, and has a long service life.
- Package Include: 2 x Hub Actuator
- Compatible Models - Fits for Ford F-150 (4X4; Not for Raptor Models) 2009 - 2014.
- 10pcs Kit Includes -Front Left Upper Control Arm + Ball Joint×1；Front Right Upper Control Arm + Ball Joint×1；Front Stabilizer Sway Bar Links×2；Front Right Outer Tie Rod Ends×1；Front Left Outer Tie Rod Ends×1；Front Inner Tie Rod Ends×2；Front Lower Ball Joints×2.
- Durably Designed - Made with High Strength Steel Tubing for Superior Strength and Durability, additional coatings offer long-lasting rust and corrosion resistance to extend the life of control arms.
- Quality Engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride. each assembly includes pre-installed ball joint and bushings, help reduce road noise, vibration and harshness for a smooth & quiet ride.
- Replace Direct Fit - Designed to be a direct-fit replacement for steering alignment, making it perfectly match your car. Please make sure it is compatible with your vehicle before placing order.
- COMPATIBILITY - 515029 Wheel Hub Assembly compatible with 2000-2003 Ford F-150 (Front; 4WD, M14 wheel bolts, 5 Stud Hub, 4-Wheel ABS), 2004-2004 F-150 Heritage (Front; 4WD, M14 wheel bolts, 5 Stud Hub, 4-Wheel ABS)
- FEATURE - For 4WD Models Only, 5 Stud Hub, 4-Wheel ABS, Flange Diameter: 7.13IN, Flange Offset: 1.95IN, Bolt Circle Diameter: 5.31 IN, Replaces parts:515029 WE61560 715029 BR930423 1L34-1104AA WB15029
- QUALITY - Autoround Wheel Bearing and Hub Assemblies has been quality tested to meet or exceed OEM performance standards
- INSTALLATION - Assembling has excellent performance, precise overall structure, easy and quick installation
- ABOUT AUTOROUND - Autoround offers 3 years of After-Sales Service. If you have questions, please contact “Autoround Customer Service” via Amazon at any time. We also sell a variety of other automotive replacement parts.
- Notice:For 4WD / 4x4
- Compatibility：Fits for 1997-2002 Ford Expedition (4WD; without Air Suspension; 2.48" Bolt Pattern),1997-2003 Ford F-150 (4WD; 2.48" Bolt Pattern),1997 Ford F-250 (4WD; 4.6L, 5.4L; 2.48" Bolt Pattern; Under 8500lb GVW; Light Duty; with Independent Front Suspension),1998-1999 Ford F-250 (4WD; 2.48" Bolt Pattern; Under 8500lb GVW; Light Duty),1998-2002 Lincoln Navigator (4WD; without Air Suspension; 2.48" Bolt Pattern)
- Polyurethane vs Rubber Bushings：Polyurethane bushings offer greater durability, better handling, and longer life than rubber. They reduce wear, minimize vibration, and maintain elasticity in all conditions ideal for drivers seeking performance and reliability.
- Product List：2x Front Upper Control Arms + 2x Front Sway Bars + 4x Tie Rod Ends+2x Front Lower Ball Joints+ 1x Idler Arm [2.5" Bolt Pattern Idler Arm] + 1x Pitman Arm
- OE Replacement:Control Arm Assemblies is Designed as A direct OE Replacement, Factory-Tested for 100% Reliability and Performance.
- 【Compatibility Vehicle】 515169 Wheel Bearing and Hub Assembly Replacement for 2015-2017 Ford F-150(Front;4WD)
- 【Product Specification】 Brand New Wheel Bearing and Hub Assembly, Part No.: 515169 , Fits for the Front position, Number of Flange Bolts Hole: 4，Replaces Part Numbers: 515169，6 Lug Bolts w/ABS
- 【Real image and easy to install】 All pictures are real shots, our products are consistent with the pictures, Wheel Hub and bearing assembly have undergone strict design and production, easy to install, stable operation, safe and reliable, can be perfectly replaced with 515169 Wheel Bearing and Hub Assembly.
- 【High Quality】Wheel hub bolts with protective coating, not easy to rust and corrode, and easier to tighten the wheel nuts. Better seal design, which lasts and minimizes noise and vibration. Each item is factory quality inspected according to OEM production standards and meets the highest standards.
- 【Customer Support】We are always developing and innovating, will continue to bring new auto parts. If this model is not suitable for your car, you can click 'KUSATEC' to enter the store, we have more models for you to choose!
This product presentation was made with AAWP plugin.