NHTSA ID Number: 10176950
Manufacturer Communication Number: SSM 48901
Summary
Some 2020 Aviator vehicles may exhibit various air suspension concerns. To assist with diagnosis and service of the air suspension system, the WSM has been updated. Refer to WSM, Section 204-05, Vehicle Dynamic Suspension > General Procedures > Air Suspension System Depressurize and Pressurize for the updated procedure.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| LINCOLN | AVIATOR | 2020 |
SSM 48901
2020 Aviator – Air Suspension Service – Updated Workshop Manual (WSM) Procedure
Some 2020 Aviator vehicles may exhibit various air suspension concerns. To assist with diagnosis and service of the air suspension system, the WSM has been updated. Refer to WSM, Section 204-05, Vehicle Dynamic Suspension > General Procedures > Air Suspension System Depressurize and Pressurize for the updated procedure.
Vehicles:
2020 Aviator (C611C) (TU)
1 Associated Document
Manufacturer Communications
SSM 48901
- 🚗【Compatible Models】Rear air suspension springs compatible with 1992-2011 Mercury Grand Marquis, for 1990-2011 Lincoln Town Car, for 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 Ford Crown Marquis.
- 🚗【OEM Number for Replacement】 Rear Spring Suspension Bags replaces for 3U2Z5580AA, 3U2Z5580BA, 3U2Z5580PA, 6W1Z5560AA, FOVY5560A. (Tips: You can find the rear left & right air spring bags you need accurately according to the OE number)
- 🚗【Superior Quality】The air ride is made of imported high density rubber, more durable and better load performance than normal air suspension, provide you with better drive experience after replacement.
- 🚗【Excellent Driving Experience】Air spring bags prevent passengers from physical collision impact, greatly reducing the possibility of injury, as well as absorbing vibrations, maximum ride comfort and braking.
- 🚗【Satisfactory Service And Guarantee】 Provide service support and friendly customer service throughout the year. The rear shock is factory-proven. Timely replacement of aging air suspension is conducive to improving the ride comfort of the vehicle. Gives you a smooth ride again.
- Air Suspension Compressor Pump with Dryer OEM Part number: 949-200, 3W1Z5319BA, 6W1Z5319AA, 8W1Z5319A, F6AZ5319AA, F1VY5319A, 949200, P-2234, P-2936, E9AZ5319A, F5AZ-5319-B, CD-7700
- Replacement for:1993 - 2011 Fo-rd Crown Vic-toria 4.6L V8; Replacement for 1990 Lin-coln Town Car 5.0L 302cid V8; Replacement for 1991 - 1997 / 2003 - 2011 Lin-coln Town Car 4.6L V8; 1992 - 2011 Mer-cury Gr-and Mar-quis 4.6L V8
- If your air suspension air spring leaks, it can cause the air pump to work continuously. The air pump has a life span, which will continue to work continuously, which will affect his life. Before installation, please be sure to check whether there is any air leak before other installations.
- After installing a new pump, do not allow the pump body to work for a long time. Do not be excited because of curiosity or deliberately test whether the after-sales air pump works normally. Let the pump body work for a long time. This will cause the motor to work for a long time, the pump body will overheat, and the temperature sensor will transmit. Give the computer a signal to stop the pump body. It can be recovered after the pump body has been cooled for 1 hour.
- Package included: 1 x Air Compressor with Dryer. Please confirm that the OE part number and the applicable model match your vehicle before placing the order.
- Front Struts Shocks Kit Replacement for 2003-2011 Ford Crown Victoria (Excluding Police/Taxi Models) - [2003-2011 Lincoln Town Car (Excluding Limo and Commercial Chassis)] - 2003-2008 Mercury Grand Marquis (Excluding Police/Taxi Models)
- Suspension Kit Includes: 2x Front Struts & Springs Assembly + 2x Rear Shock Absorbers Assembly + 2x Front Sway/Stabilizer End Links + 2x Rear Sway/Stabilizer End Links + 2x Front Upper Control Arms w/ Ball Joint Assembly + 2x Front Lower Ball Joints + 2x Front Inner Tie Rod Ends + 2x Front Outer Tie Rod Ends + 2x Tie Rod Boots Bellows w/Locking C-Clamps
- Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation
- Undergo impact, wear, and fatigue testing to help ensure quality and durability
- 10-YEAR WARRANTY!
- Compatibility:Fits for Ford Expedition 4WD 1997-2002, F150 4WD 1997-2003, 1997 F-250 (4WD; 4.6L; 5.4L), 1998-1999 F250 4WD, Fit for Lincoln Navigator 4WD 1998-2002
- Kit Includes: 2x Upper Control Arm + Ball Joint , 2x Front Upper Ball Joint, 2x Front Outer Tie Rod End, 2x Front Inner Tie Rod End, 1x Idler Arm [2.5" Bolt Pattern], 2x Tie Rod Adjusting Sleeve, 2x Front Sway Bar End Links, 1x Front Pitman Arm
- Enhanced Structural Strength: High-strength structure can withstand repeated impact loads, making it more stable during operation
- Premium Ball Joints: For noise-free, articulation and durability, we sourced premium ball joints for our tubular upper control arms. Compared to other common ball joint brands, our ball joint exhibits one of the highest articulation angle.
- Safety: Control arm with strong torsional resistance, good stability, better response to wear and fatigue, and long service life.
- 【Front End Suspension Kit Fitment】Compatible with Ford Crown Victoria 1998 1999 2000 2001 2002, for Lincoln Town Car 1998 1999 2000 2001 2002, for Mercury Grand Marquis 1998 1999 2000 2001 2002
- 【Suspension Kit Include Components】16pc set front end kit complete full set - 2 x ES3494 Front Inner Tie Rod End, 2 x ES3495 Front Outer Tie Rod End, 2 x ES3311S Front Tie Rod Adjusting Sleeve, 1 x K8283 Front Steering Idler Arm, 1 x K8688 Front Steering Pitman Arm, 2 x K8678 Front Upper Ball Joint, 2 x K8685 Front Lower Ball Joint, 2 x K8953 Front Sway Bar End Link, 2 x K8848 Front Sway Bar End Link
- 【Useful Function】After installing our suspension kit assembly, the following issues may be improved: 1.crash sound 2.unstable steering 3.uneven tire wear 4.excessive vibration. Replaces all worn parts at once, restoring precise steering response, eliminating front-end noise, and giving you a smoother driving experience
- 【Long-lasting Performance】Precision-crafted with heat-treated steel and high-grade components to increase strength and strong wear resistance, pre-greased socket and pre-installed boot keep dirt and water out for reliable performance and long life. this suspension kit is built to withstand daily road stress, potholes, and varying weather conditions. It helps maintain consistent stability and responsive handling, so you can rely on your vehicle's front-end performance for miles to come
- 【Installation Notice】SCITOO Auto Parts select premium quality material to help ensure quality and durability. All suspension products come pre-greased for reduced friction and long life, and will require no additional work. We offer 1 year replacement. Select your vehicle (Year/Make/Model/Trim) in the Part Finder to confirm compatibility, or see compatible vehicles in the description
This product presentation was made with AAWP plugin.





