NHTSA ID Number: 10174933
Manufacturer Communication Number: ENP-731
Summary
The Agility Fuel Solutions LLC (Agility®) service team identified certain Package Trucks built on the Ford F59 chassis, powered by the Ford V10 with an Agility® CNG system, exhibiting improper dash fuel gauge readings. Readings include but are not limited to, premature low fuel warning, inoperative fuel gauge, and perceived poor MPG. A running change/product enhancement was released after some units were produced and shipped to the end user.
3 Affected Products
Equipments
| AGILITY FUEL SYSTEMS | CNG FUEL SYSTEM | |
| AGILITY FUEL SYSTEMS | CNG FUEL TANK | |
| AGILITY FUEL SYSTEMS | CNG PRESSURE RELIEF DEVIC |
UPS Ford F59 Package Truck
Poor/ Improper Fuel Gauge Reading
ENP-731
April 9, 2020
1. Introduction
The Agility Fuel Solutions LLC (“Agility”) service team has identified certain Package Trucks built on the Ford F59 chassis, powered by the Ford V10 with an Agility® CNG system, that are exhibiting improper dash fuel gauge readings. These readings include but are not limited to, premature low fuel warning, inoperative fuel gauge, and perceived poor MPG. There was a running change/product enhancement that was found and released after some units were produced and shipped to the end user.
Figure 1 Agility® Fuel Control Module (1)
1.1 Warning Messages Used in this Bulletin
⚠ CAUTION.
Damage to equipment, engine, fuel system or vehicle is possible if instructions are not followed.
NOTICE .
Best practices or hints to help an operation or procedure go smoothly.
2. Affected Units
271188 Ford F59 Package trucks
3. Tools and Materials
| Description | |
| Terminal Removal Tool | Ratchet |
| 10 mm socket | Heat Gun |
| Side cutters | Rust Inhibitor Spray |
| Agility® fuel control module p/n 20102905 Agility® Harness Kit p/n 69000535 containing: Qty: 1 – Ground Harness, p/n 60140015
Qty: 1 – Self Tapping Bolt, p/n 61090123 Qty: 10- Zip ties, p/n 61090092 Qty. 2- Heat shrink tube, p/n 62040001 | |
4. Corrective Action / Procedure
For those units identified to be needing ground harness rework and Agility® control module replacement, continue with the following procedure.
For those units identified to be needing the Agility® control module ONLY go to page 15, step 15.
⚠ CAUTION.
Observe all safety measures for CNG vehicle repair including all facility requirements.
⚠ CAUTION.
▪ Park vehicle, set parking brake, remove ignition key, and secure vehicle tires with wheel chocks.
Figure 2: Fuel Pressure Regulator (2), Fuel Supply Solenoid (3)
- Locate the high-pressure regulator (2) on the driver side frame rail near the transmission.
- The supply solenoid (3) is located on the inboard side of the inboard side of the regulator with the connector to the rear of the vehicle.
Figure 3: Fuel Supply Harness (4)
- Remove the supply solenoid connector from the supply solenoid by gently lifting on the connector tab while sliding the connector out of the solenoid.
Figure 4: Supply Harness removed (5), TPA Clip (6), TPA removed (7)
- Remove the Red TPA by lifting on either ear and sliding it out of the top of the connector.
Figure 5: Connector (8), Ground Terminal (9)
- Using an appropriate terminal depinning tool lift the terminal lock (circled) from the ground terminal (9) and slide the terminal out the rear of the connector.
Figure 6: Original ground terminal removed (10), New Supply ground harness installed (11)
- Install the new ground terminal into cavity B on the supply solenoid connector. An audible click should be heard when the terminal has seated into the lock. Gently pull on the wire to confirm it is seated.
Figure 7: TPA reinstalled (12), Original ground wire (13)
- Install the TPA and ensure that the TPA tangs are flush to the body of the connector (12). If the TPA is binding remove it and inspect to make sure that the connector to ensure that the terminal locks are fully seated.
- Trim the main harness ground approximately 0.50” from the heat shrink tube (13).
Figure 8: Original ground harness sealed off (14)
- Install adhesive lined heat shrink tubing onto the trimmed ground and when hot crimp the end shut with pliers to ensure a watertight seal.
- Fold the tab onto itself and install another piece of heat shrink tubing to ensure a complete seal.
Figure 9: New ground harness secured to chassis harness.
- Secure the harness to the main Agility®
- Route the harness along the frame rail securing it to the main harness with zip ties as needed.
Figure 10: Location of hole to be used for grounding location (15), Zoomed in location of hole to be used (16)
- Using the supplied self-tapping bolt secure the ground eyelet to the chassis in the location indicated on the left. We recommend using a drill or impact driver to install this.
Figure 311: Driver side frame rail 1/4 turn valve (17), Ground bolt installed (18)
Figure 412: Ground bolt sprayed with anti-corrosion spray (19)
Agility® Fuel Control Module Replacement
- Set parking brake and secure vehicle with wheel chocks.
- Remove vehicle negative battery terminal(s).
Refer to OEM procedure.
Figure 13: Agility® Fuel Control Module (20), Cabin harness connector (21), 4-pin connector (22), bracket (23)
- Disconnect cabin harness 16-pin connector (21) and 4-pin connector (22) from ECU (20). Figure 14.
Figure 14: Agility® fuel control module (24), Controller fasteners (circled), Controller bracket (25)
- Remove four lock nuts, four bolts and four washers (circled) retaining ECU (24) to ECU bracket (25). Figure 15
- Remove controller (24).
Agility® Fuel Control Module Installation
- Use four lock nuts, four hex cap bolts, and four washers to secure controller (24) to controller bracket (25). Figure 14
⚠ CAUTION.
Torque screws to 7 ft-lbs (9.5Nm) to 9-ft-lbs (12.2Nm).
- Apply dielectric grease to controller cabin harness 16-pin and 4-pin connectors.
- Connect cabin harness 16-pin connector (21) and cabin harness 4-pin connector (22) to controller (20). Figure 13
- Connect negative battery cable(s)
Refer to OEM procedure
- Verify proper operation.
For parts and support, contact Agility® Customer Care: +1 949 267 7745, toll free: +1 855 500 2445 or [email protected]
Agility Fuel Solutions | 3335 Susan Street Suite 100 | Costa Mesa, CA 92626 USA www.agilityfuelsolutions.com
ENP-731
April 9, 2020
Bestseller No. 1
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note：The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
SaleBestseller No. 2
Innova SD35 OBD2 Scanner – ABS, SRS, TPMS & Check Engine Code Reader, Live Data, All System Diagnostics, Compatible with Most Vehicles
- OBD2 SCANNER FOR ALL SYSTEMS – The INNOVA SD35 is a tablet-based OBD2 scanner designed for advanced diagnostics. Read and clear check engine light, ABS, SRS, and TPMS codes, plus test your car battery and alternator to prevent unexpected failures. Vehicle coverage may vary. Please use Innova’s Coverage Checker to verify compatibility.
- ALL-SYSTEM DIAGNOSTICS & LIVE DATA – Unlike basic code readers, this OBD2 scanner for all vehicles scans engine, transmission, ABS, SRS, and more. Get real-time live data, including RPM, fuel trims, temperature readings, and oxygen sensor performance.
- OBD2 TABLET WITH USER-FRIENDLY INTERFACE – This automotive scan tool features a high-resolution display, making vehicle diagnostics faster and easier.
- ADVANCED TPMS, OIL RESET & SERVICE FUNCTIONS – Perform TPMS sensor checks, oil light reset, and other service resets with ease This professional diagnostic tool provides comprehensive vehicle maintenance capabilities in one device.
- WIDE VEHICLE COVERAGE (1996 & NEWER CARS & TRUCKS) – This OBD2 scanner Bluetooth tablet is compatible with Toyota, Ford, Honda, Chevrolet, Nissan, Dodge, and more. However, feature coverage may vary. Please use Innova's Coverage Checker to verify coverage.
Bestseller No. 3
OBDMATE OBD2 Scanner with ABS SRS Transmission Diagnostic Tool
- 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM
systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required. - 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
SaleBestseller No. 4
Full Systems OBD2 Scanner Car Diagnostic Tool with ABS SRS Transmission Etc
- 【Full Systems Automotive Diagnostic】 More than checking engine, ABS and SRS, OBDMATE OM970 obd2 scanner performs comprehensive diagnostics on all electric modules. It quickly scans and clears fault codes, turns off warning lights, reads live data, and features Auto-VIN technology.
- 【Live Datastream&4-in-1 Graph】 Easily view live sensor data such as RPM, fuel trims, ATF temperature, wheel speed sensor, battery voltage and so on. OM970 scan tool also supports 4-in-1 trend graphing. Spend just 3 minutes to check – and you'll know exactly what's going wrong, helping you avoid hundreds in dealership diagnostic fees.
- 【One-Click I/M Readiness&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether your vehicle's emissions-related systems are operating properly. Help you get smog-check ready quickly. OM970 obd2 diagnostic tool supports all essential OBD2 functions you need. Plus, it features battery voltage test and DLC 16-PIN test.
- 【Straightforward Menus with Easy Navigation】 All functions are easy to understand without obscure decriptions. 3.5" Large screen delivers clear readings while keeping one-hand operation. The car diagnostic tool comes with a silicone protective case and a hard-shell carrying case, ensuring long-lived durability and drop resistance.
- 【Budget-Friendly, No Subscriptions, Free Software Updates】 Plug and play: no bluetooth pairing, monthly fees, Wi-Fi connection, or any other troublesome initial settings. OM970 obd2 scanner works out of the box with the latest software. Lifetime free upgrade.
SaleBestseller No. 5
XTOOL D5S OBD2 Scanner, 16 Resets, Engine ABS SRS Transmission Scan Tool
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
This product presentation was made with AAWP plugin.