NHTSA ID Number: 10148718
Manufacturer Communication Number: SSM 47557
Summary
Some 2017-2018 F-150 vehicles equipped with a 2.7L EcoBoost engine may exhibit white or grey smoke/vapor from the exhaust after cold start and/or black soot accumulation on the exhaust tailpipe. Some smoke during cold start is normal for EcoBoost engines due to their unique fueling characteristics. If the vehicle exhibits smoke after the engine is at normal operating temperature refer to the appropriate section of the Workshop Manual (WSM) and/or Powertrain Control Emissions Diagnosis (PC/ED) Manual for diagnostics. Refer to GSB G0000185 Various Vehicles Equipped With Turbocharged V6 Engines – Turbocharger Oil/Coolant Leaks before replacing gasoline engine turbochargers.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| FORD | F-150 | 2017-2018 |
1 Associated Document
Manufacturer Communications
SSM 47557
- Formulated for engines with 75,000 miles or more, Valvoline MaxLife High Mileage synthetic blend is formulated with seal conditioners to help prevent oil leaks and reduce oil consumption
- Delivers 20% better wear protection and 15% better sludge defense than industry standards to help prevent engine breakdown
- Extra detergents safeguard against friction, corrosion and deposits to keep high-mileage engines clean
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency
- Provides performance benefits for high mileage, new and re-built engines alike
- Helps extend engine life, even in severe conditions
- Protects for 15,000 miles – guaranteed*
- Contains additives to help fight sludge
- Keeps your engine running like new
- High Mileage for engines 75,000+ miles
- Helps extend engine life of higher mileage vehicles
- Protects for 15,000 miles – guaranteed*
- Contains additives to help fight sludge
- Keeps your engine running like new
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards* | Seal conditioners to help reduce leaks
- Advanced additives that help prevent engine wear | Improved Fuel Economy**
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets Ford WSS-M2C946-B1 | Meets Ford WSS-M2C961-A1 | * Based on API and ACEA volatility specifications | ** In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- As measured in Sequence VH sludge test vs. API SP limits
This product presentation was made with AAWP plugin.