| “This site contains affiliate links for which OEMDTC may be compensated” |
2016-2017 Ford/Lincoln – SYNC 3 v2.2 – APIM Programming Installation Failed Error
A ‘Installation Failed Error Code: MEM_ERR03’ error message may occur when programming the SYNC module to v2.2.
Programming tips:
The USB flash drive must be 32GB formatted to exFAT.
Do not remove the USB flash drive from the media hub until the final installation message is displayed (non-Nav vehicles have two installation complete messages).
Perform a complete ignition cycle by turning the key off for 5 minutes (open/close driver’s door) which is critical for a successful installation.
If these tips are ineffective, perform a SYNC master reset (Settings ⇒ General ⇒ Master Reset), ignition OFF for 5 minutes, ignition ON, and insert the USB drive again to complete programming.
If the message is still present, no additional repairs should be attempted.
Engineering is aware and is currently investigating. Monitor OASIS for future updates.
