NHTSA ID Number: 10115953
Manufacturer Communication Number: SSM 46703
Summary
Some 2013-2017 Edge/MKX/Escape/MKC/Fusion/MKZ/Flex/MKT/Mondeo/Kuga/EcoSport AWD vehicles where diagnosis leads to a RDU clutch issue, a rear drive unit (RDU) service kit is available. Use the vehicle identification number (VIN) in the parts catalog to look for base part 4A232. If clutch assembly (base 4A232) is not listed in the catalog, this message does not apply. For vehicle repairs refer to updated Workshop Manual (WSM), Section 205-02 on ATC clutch repairs. Use causal part 4A232 or equivalent and applicable labor operations.
35 Affected Products
Vehicles
| FORD | EDGE | 2013-2015 |
| FORD | ESCAPE | 2013-2017 |
| FORD | FLEX | 2013-2017 |
| FORD | FUSION | 2013-2017 |
| LINCOLN | MKC | 2015-2017 |
| LINCOLN | MKT | 2013-2017 |
| LINCOLN | MKX | 2013-2014, 2016-2017 |
| LINCOLN | MKZ | 2013-2017 |
SSM 46703
- Extreme pressure additives deliver outstanding high pressure performance, load carrying capacity and durability for towing and hauling
- Daily protection gear lubricant helps prevent noise and chattering, while protecting gear teeth from wearing out prematurely
- Exceptional high and low temperature protection ranges from -15F to 410F for dependable year-round coverage
- Fights rust and corrosion with corrosion inhibitors and safeguards against impurities, oxidation and thermal breakdown
- Meets or exceeds API Services GL-5 and non-synchronized manual transmissions calling for GL-4
- The information below is per-pack only
- Extreme pressure additives deliver outstanding high pressure performance, load carrying capacity and durability for towing and hauling
- Daily protection gear lubricant helps prevent noise and chattering, while protecting gear teeth from wearing out prematurely
- Exceptional high and low temperature protection ranges from -15F to 410F for dependable year-round coverage
- Fights rust and corrosion with corrosion inhibitors and safeguards against impurities, oxidation and thermal breakdown
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- WIDEST SPEC RANGE ON THE MARKET: widely compatible with a very large number of hypoid gear systems, differentials, transmissions and axle assemblies.
- SEVERE SERVICE MAX: Exceptional shear stability and oxidation resistance. Polyphosphate EP proprietary additive system offers substantial improvement in performance over previous generation, low cost, gear oils
- BUILT IN LIMTED SLIP ADDITIVE - Does not require "additional" LS additive. Its built into the product, optimized for all limited slip differentials, including those with built in wet brakes.
- OUTSTANDING SCUFFING PROTECTION - Superb gear and syncron protection, facilitating extremely long transmission life. Exceeds Load Stage 13 extreme pressure requirements beyond 120,000 lbs / sqi.
- SHEAR STABLE - Excellent thermal stability and high load capacity without viscosity breakdown, facilitates excellent film strength under high loads, high temp and high shear conditions.
This product presentation was made with AAWP plugin.





