| HAZARD/TURN SIGNAL/TRAILER TOW LIGHTING – BUILT ON OR BEFORE 5/29/2015 |
| FORD | 2011-2015 F-59 Commercial Stripped Chassis |
ISSUE:
Some 2011-2015 F-59 Commercial Stripped Chassis vehicles built on or before 5/29/2015 may experience hazard lighting, turn signal operation or trailer tow (TT) lighting that is not functioning properly.
Vehicle vibrations may internally damage the relays that control the lighting circuits.
ACTION:
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
- Is the hazard lighting, turn signal operation or TT lighting not functioning properly?
- Yes – proceed to step 2.
- No – this article does not apply. Refer to Workshop Manual (WSM), Section 417-01 for normal diagnostics.
- Locate the central junction box (CJB) in the lower left side of dash. Remove and discard the following relays: (Figure 1)
Figure 1
- Install new 4-terminal relays in the CJB in positions A, B, C and D. (Figure 1)
| 9L2Z-14N089-A | Terminal Relay Assembly (4 req) |
True MODS 1 Pack Bosch Style 5-Pin 12V Waterproof Relay Kit SPDT 30/40 Amp
- User Manual available for download under Product Information Details
- Waterproof construction & heavy duty 12AWG wires for the main contact.
- Bosch style 5-Pin SPDT (Single Pole Double Throw) Relay.
- 12VDC (14V Max) and 40A/30A High Switching Capability.
- Wire Specifications: Black - Ground (85), Red - VDC (30), White - Trigger (86), Yellow - Output N/C (87a), and Blue - Output N/O (87).
This product presentation was made with AAWP plugin.



