June 28, 2024 NHTSA CAMPAIGN NUMBER: 24V486000
Windshield May Detach During a Crash/FMVSS 212
A windshield that detaches from a vehicle during a crash can increase the risk of injury.
NHTSA Campaign Number: 24V486
Manufacturer Ford Motor Company
Components VISIBILITY
Potential Number of Units Affected 4,361
Summary
Ford Motor Company (Ford
) is recalling certain 2024 F-150 vehicles. The windshield may not have been properly bonded to the vehicle, allowing it to detach during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, “Windshield Mounting.”
Remedy
Dealers will remove and reinstall the windshield, free of charge. Owner notification letters are expected to be mailed July 8, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 24C20.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Vehicle has a Recall
Chronology :
May – June 2024
On May 9, 2024, an issue pertaining to windshield adhesion on certain F-150 vehicles was brought to Ford’s Critical Concerns Review Group (CCRG) for review. On May 2, 2024, personnel at Ford’s Kansas City Assembly Plant (KCAP) identified visible urethane sealer on the interior passenger side A-pillar that was off location relative to the windshield and flange. Upon further investigation, Ford discovered that variations in the manufacturing fixture process, used to position the windshield before applying the urethane, could lead to the possibility of insufficient adhesion between the windshield and the vehicle’s structure.
To verify the potential for improper windshield adhesion along the A-pillar, Ford conducted vehicle windshield glass cut-out inspections at Ford’s Kansas City Assembly Plant across the suspect vehicle build timeframe.
Windshield air leakage testing and water leak audits were also performed on units within the suspect population. Photos from an overhead camera Artificial Intelligence (AI) pilot program were utilized to further identify windshields that were improperly positioned during the urethane application.
Ford determined that suspect vehicles with this potential condition may not conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 212 Windshield mounting.
As of June 18, 2024, Ford is not aware of any warranty, field reports, or customer complaints related to this concern.
On June 21, 2024, Ford’s Field Review Committee reviewed the concern and approved a field action.
Ford is not aware of any reports of accident or injury related to this condition.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| FORD | F-150 | 2024 |
2 Associated Documents
Recall Acknowledgement
Recall 573 Report
RCLRPT-24V486-3579.PDF 215.059KB
- Specialized Polyurethane Formula: This windshield adhesive provides a quick-curing, robust bond that eliminates drips & mess. Its non-sagging properties make it suitable for vertical & overhead applications.
- Superior Bonding Strength: Our high-quality polyurethane adhesive ensures a strong hold, absorbing impacts and vibrations to keep your windshield secure, crack-free, & leak-proof even in tough conditions.
- All-Weather Auto Glass Adhesive: This windshield repair adhesive maintains its grip in both high and low temperatures, providing a watertight seal for protection against moisture and rain.
- Easy Application, No Primer Needed: Our polyurethane windshield adhesive comes in a 310ml cartridge compatible with standard caulking guns. Ready to use and includes gloves and an applicator tip.
- Multipurpose Automotive Adhesive: Capable of bonding various parts of vehicles including glass edges, backlights, and sidelights; suitable for cars, trucks, and RVs.
- PROFESSIONAL AUTO GLASS BOND: High-strength urethane adhesive bonds windshields securely to vehicle frames for a permanent, weatherproof seal. Helps prevent leaks and withstands road vibrations and extreme temperatures.
- SUPER FAST 1-HOUR CURE: Advanced moisture-curing formula sets quickly with a 10-15 minute work time and achieves safe drive-away strength in as little as one hour (at 73°F). Ideal for professionals to minimize vehicle downtime.
- EASY, NO-MESS APPLICATION: Medium viscosity, non-sag formula won't drip for controlled application on vertical or overhead surfaces. Use any standard 10.5 oz cartridge caulking gun (manual or powered) for precise adhesive placement.
- ONE-PART URETHANE, NO MIXING: Ready-to-use single-component polyurethane adhesive requires no mixing or special equipment. Simplifies windshield replacement with consistent bonding performance and no guesswork.
- VERSATILE & UNIVERSAL USE: Designed for replacing bonded auto glass, including windshields, rear windows, and quarter glass. Also suitable for some non-structural panel bonding applications. Universal fit for cars, trucks, and SUVs.
- BOND WINDSHIELDS YOUR WAY: Compatible with both manual or powered caulking guns
- FAST-CURING: Adhesive produces rapid results, curing in just 24 hours
- For industrial/occupational use only. Not for consumer use
- HIGH-BOND STRENGTH: Designed for permanent windshield bonding and stationary glass attachment
- MEDIUM-VISCOSITY FORMULA: Non-sag urethane formula makes for clean and easy application
- Strong Adhesion – This windshield glue adhesive absorbs shocks and vibrations to keep windshields securely in place. Prevents cracks and leaks, even on rough roads or under extreme stress.
- Quick-Curing & Non-Drip – Our urethane adhesives formula sets quickly without sagging or dripping, significantly reducing hold time. This allows you to complete vertical and overhead applications faster and with a cleaner, more professional finish.
- Weather-Resistant – Whether it’s sweltering summer heat, freezing winter cold, or even extreme temps from -50°C to 180°C, our formula withstands high and low temperatures, UV rays, and moisture—forming an impenetrable seal that shields your vehicle from downpours and humidity, all for long-lasting performance.
- Easy Application – Our polyurethane windshield adhesive comes in a 300ml cartridge compatible with standard caulking guns. It’s ready to use, includes an applicator tip, and just remember to clean the surface before use for smooth, reliable bonding.
- Multipurpose Automotive Adhesive – This auto glass adhesive seamlessly bonds windshields, backlights, sidelights, and glass edges on any vehicle—from cars and trucks to RVs. Designed for both DIY enthusiasts and professional repairs, it’s the go-to solution for durable, leak-proof results every time.
![[2 Pack] Polyurethane Windshield Adhesive — Fast Curing Urethane Auto Glass Glue, High Bond Strength Black Windshield Sealant for Vehicle & RV Window Seal, OEM Quality with Gloves, American Owned](https://m.media-amazon.com/images/I/41fTPJHL4qL.jpg "24C20 - Windshield May Detach During a Crash - 2024 Ford F-150 6")
- FAST-CURING WINDSHIELD ADHESIVE — OEM QUALITY BOND — Professional-strength polyurethane formula bonds windshields, rear windows, and side glass with fast-curing adhesive that reaches handling strength in hours. OEM-level performance for auto glass replacement and repair on cars, trucks, SUVs, and RVs.
- HIGH BOND STRENGTH — WON'T SHRINK OR CRACK — Engineered for permanent, flexible adhesion that holds through temperature swings, road vibration, and weather. The cured seal stays flexible without shrinking or cracking — critical for maintaining a watertight windshield over the life of the vehicle.
- WORKS ON ALL VEHICLE GLASS — Use as a windshield sealant, rear view mirror adhesive, or window seal compound on any vehicle. Bonds glass to metal, fiberglass, and painted surfaces. One cartridge handles a full windshield — the 2-pack covers multiple vehicles or provides a spare for future jobs.
- EASY APPLICATION — STANDARD CAULKING GUN COMPATIBLE — Cartridge loads into any standard caulking gun for controlled, even bead placement. No proprietary tools required. Each pack includes disposable nitrile gloves for professional results every time.
- 2-PACK — AMERICAN OWNED BUSINESS — Two cartridges of black urethane windshield adhesive from a family-owned American business. Keep one in the shop and one in the truck — you'll always have professional-grade glass adhesive ready when you need it.
This product presentation was made with AAWP plugin.