23B51 – Power Steering Cooler Bracket Replacement – 2021-2023 Ford F-59 Stripped Chassis

NHTSA ID Number: 10243418

Manufacturer Communication Number: 23B51

Summary

Certain 2021-2023 Model Year F59 Stripped Chassis Vehicles – Power Steering Cooler Bracket Replacement

 


September 6, 2023

NEW VEHICLE RECOMMENDED DELIVERY HOLD
Customer Satisfaction Program 23B51
Certain 2021-2023 Model Year F59 Stripped Chassis Vehicles
Power Steering Cooler Bracket Replacement

 

PROGRAM TERMS 

This program will be in effect through September 30, 2024. There is no mileage limit for this program.

 

AFFECTED VEHICLES

Vehicle Model Year Assembly Plant Build Dates
F59 Stripped Chassis2021-2023Detroit ChassisSeptember 9, 2021, through January 23, 2023

US population of affected vehicles: 13,951. Affected vehicles are identified in OASIS and FSA VIN Lists.

 

REASON FOR THIS PROGRAM

In all of the affected vehicles, the power steering cooler brackets were not manufactured to specification and may crack or break under normal vehicle usage. Breakage of the power steering cooler brackets may lead to a banging or rattling noise as the brackets separate from the frame and the power steering cooler contacts the ground surface.

 

SERVICE ACTION

Dealers are to replace the power steering cooler brackets. This service must be performed on all affected vehicles at no charge to the vehicle owner.

To assist vehicle owners to have this repair completed when parts are available, dealers should:

  • Arrange for a mobile repair at the owner’s location
  • Mobile service should be made available for all customers. Refer to the Rental and Claiming sections for further details.

 

OWNER NOTIFICATION AND MAILING SCHEDULE

Owner letters are expected to be mailed the week of September 25, 2023. Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.

 

MOBILE SERVICE REPAIR ASSESSMENT LEVEL

  • – Enhanced Mobile Service

 

MOBILE REPAIR RECOMMENDATIONS

  • Confirm with the customer a mobile repair is feasible.
  • Check OASIS before going to the customer’s home or business to confirm if any other outstanding FSA needs to be completed.
  • Transportation – due to the simplicity of this repair, a specialty vehicle is not required.

 

MOBILE REPAIR ADDITIONAL INFORMATION

Please ensure the technician brings the following to the mobile repair destination:

  • Printed Technical Instructions
  • Printed Repair/Work Order or any other necessary documentation as customer copy(s)
    • Documents could also be emailed to the customer.
  • Shirt/uniform and vehicle graphic with the dealership or Ford logos are recommended.

 

SOLD VEHICLES

  • Owners of affected vehicles will be directed to dealers for repairs.
  • Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date.
  • Correct other affected vehicles identified in OASIS which are brought to your dealership.
  • Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.

 

STOCK VEHICLES

  • Correct all affected units in your new vehicle inventory before delivery.
  • Use OASIS to identify any affected vehicles in your used vehicle inventory.

 

BRANDED / SALVAGED TITLE VEHICLES

Affected branded / salvaged title vehicles are eligible for this service action.

 

OWNER REFUNDS

  • Ford Motor Company is offering a refund for owner-paid repairs covered by this program if the repair was performed before the date of the Owner Notification Letter. This refund offer expires March 31, 2024.
  • Dealers are also pre-approved to refund owner-paid emergency repairs that were performed away from an authorized servicing dealer after the date of the Owner Notification Letter. Noncovered repairs, or those judged by Ford to be excessive, will not be reimbursed.
  • Refunds will only be provided for the cost associated with power steering cooler bracket replacement.

 

RENTAL VEHICLES 

Rental vehicles are not approved for this program.

 

PICK-UP AND DELIVERY- Participating Dealers

Dealers participating in the Remote Experience Program:

  • Refer to EFC12071, 2023 Remote Experience Program, Pickup & Delivery (PDL) Offset section for additional details.

 

PARTS REQUIREMENTS

Part Number  Description Order Quantity
MU9Z-3D744-APower Steering Cooler Bracket2

 


CERTAIN 2021-2023 MODEL YEAR F59 STRIPPED CHASSIS VEHICLES — POWER STEERING COOLER BRACKET REPLACEMENT

SERVICE PROCEDURE

1. With the vehicle in NEUTRAL, position it on a hoist. Follow the Workshop Manual (WSM) procedures in Section 100-02 Jacking and Lifting – Overview.

2. Remove both of the power steering cooler bracket to body bolts and nuts. See Figure 1.

 

3. On both sides of the power steering cooler, remove the bolts holding the brackets to the cooler. See Figure 2.

 

4. On both sides of the power steering cooler, separate the cooler brackets and clamps and discard only the brackets. See Figure 3.

 

5. Install the new brackets and the original clamps and bolts (finger tight at this time) onto both sides of
the power steering cooler. See Figure 4.

 

6. Install both of the power steering cooler bracket to body bolts and nuts. See Figure 1.

Torque: 41 lb.ft (55 Nm).

7. Center the power steering cooler in the new brackets and tighten the bolts.

Torque: 18 lb.ft (25 Nm).

8. Lower the vehicle.

 


3 Affected Products

Vehicle

MAKEMODELYEAR
FORDF-592021-2023

 


1 Associated Document

Manufacturer Communications

September 6, 2023
Power Steering Cooler Bracket Replacement

MC-10243418-0001.pdf 1133.373KB

 


 

Bestseller No. 1
Bestseller No. 2
Johnsen's 4611 Power Steering Fluid - 1 Gallon
  • High quality power steering fluid and conditioner
  • Stops Noise
  • Stops slipping
  • Helps prevent unusual wear
  • Protects seals
SaleBestseller No. 3
Valvoline MaxLife Power Steering Fluid, 32 oz
  • Engineered Stop Leak Protection: Specially formulated to condition and rejuvenate worn seals, helping stop existing leaks and preventing future fluid loss for smoother steering performance
  • Long-term system durability: Provides advanced protection against wear and tear in the power steering system, ensuring reliable operation and extending component life under demanding conditions
  • Anti-foaming and oxidation control: Reduces fluid breakdown, prevents harmful foam formation, and resists oxidation, keeping the steering system clean and responsive over time
  • Seal Conditioning Benefits: Rejuvenates aged seals, restores flexibility, and helps reduce cracking or wear that commonly leads to power steering leaks.
  • Recommended Applications: Suitable for ABS, disc, and drum braking systems meeting GM 1050017, Chrysler Spec 5931, and Ford Spec M2C195-A requirements
Bestseller No. 4
Lucas Oil 10823 12 oz Power Steering Fluid,
  • Conditions O-rings
  • Contains mild seal to help prevent small leaks
  • Helps extend fluid lifeSpecifications
  • Weight: 10 lbs
SaleBestseller No. 5
Prestone AS262 Power Steering Fluid with Stop Leak, 50,000 Miles, 12 oz.
  • 50,000 mile fluid life
  • Includes Stop Leak additives to prevent and stop power steering system leaks
  • Anti-wear protection increases system life; protects against pump failure, squeals and clogs; corrosion protection for metals, rubber & gasket components
  • Conventional formula; for use in all manufacturers
  • Size: 12 oz.

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...