NHTSA ID Number: 10244833
Manufacturer Communication Number: SSM 51984
Summary
Some 2022-2023 Explorer vehicles with 2.3L engine built on or before 20-Jul-2023 may exhibit an intermittent malfunction indicator light (MIL) with diagnostic trouble code (DTC) P1026 and/or P1299 present in the powertrain control module (PCM) and an engine over-temperature message displayed on the instrument panel cluster (IPC) after a cold engine start. The vehicle will also exhibit reduced performance when it enters fail safe cooling open loop mode. If the engine is not overheating, clear the DTCs to reset the fail safe cooling open loop mode. Start and idle the engine while viewing coolant flow at the top inner (engine side) degas bottle hose port through the semitransparent top. If there is no coolant flow, replace the L1MZ-8A365-AAD engine-to-degas bottle hose. If if there is any coolant flow, return to Workshop Manual (WSM), Section 303-03A diagnostics.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
FORD | EXPLORER | 2022-2023 |
1 Associated Document
Manufacturer Communications
SSM 51984
2022-2023 Explorer – 2.3L – Intermittent Engine Over-Temperature Warning With DTC P1026 And/Or P1299 After A Cold Engine Start – Built On Or Before 20-Jul-2023
NHTSA ID Number: 10238447
Manufacturer Communication Number: SSM 51756
Summary
Some 2022-2023 Explorer vehicles equipped with a 2.3L engine may exhibit an intermittent malfunction indicator light (MIL) with diagnostic trouble code (DTC) P1026 and/or P1299 present in the powertrain control module (PCM) and an engine over-temperature message displayed on the instrument panel cluster (IPC) after a cold engine start. The vehicle will also exhibit reduced performance when it enters fail safe cooling open loop mode. If the engine is not overheating, clear the DTCs to reset the fail safe cooling open loop mode. Start and idle the engine while viewing coolant flow at the top inner (engine side) degas bottle hose port through the semitransparent top. If there is no coolant flow, replace the L1MZ-8A365-AAD engine-to-degas bottle hose. If if there is any coolant flow, return to Workshop Manual (WSM), Section 303-03A diagnostics.
1 Associated Document
Manufacturer Communications
SSM 51756
2022-2023 Explorer – 2.3L – Intermittent Engine Over-Temperature Warning Message With DTC P1026 And/Or P1299 After A Cold Engine Start – Check Coolant Flow
NHTSA ID Number: 10236336
Manufacturer Communication Number: SSM 51625
Summary
Some 2022-2023 Explorer vehicles equipped with a 2.3L engine may exhibit an intermittent malfunction indicator light (MIL) with diagnostic trouble code (DTC) P1026 and/or P1299 present in the powertrain control module (PCM) and an engine over-temperature message displayed on the instrument panel cluster (IPC) after a cold engine start. The vehicle will also exhibit reduced performance when it enters fail safe cooling open loop mode. If the engine is not overheating, clear the DTCs to reset the fail safe cooling open loop mode. Start and idle the engine while viewing coolant flow at the top inner (engine side) degas bottle hose port through the semitransparent top. If coolant flow is blocked, replace the L1MZ-8A365-AAD engine-to-degas bottle hose. If flow is steady, return to Workshop Manual (WSM), Section 303-03A diagnostics.
1 Associated Document
Manufacturer Communications
SSM 51625
2022-2023 Explorer (U625N) (TW)
2022-2023 Explorer – 2.3L – Intermittent Engine Over-Temperature Warning Message With DTC P1026 And/Or P1299 After A Cold Engine Start – Check Coolant Flow
- Compatible With Vehicle Type: marine-personal-craft
- Includes patented Prestone CorGuard technology
- Provides Extreme Temperature Protection from the worst of winter deep freezes and scorching summer heat.
- Helps a vehicle's cooling system run more efficiently and last longer
- Contains Bitterant
- The information below is per-pack only
- Compatible With Vehicle Type: marine-personal-craft
- 1 GALLON ENGINE ANTIFREEZE/COOLANT: Fully compatible with other extended life antifreeze/coolants. This item contains a bittering agent called Denatonium Benzoate.
- PROTECTS: Advanced formulation prevents rust & corrosion protecting all engine cooling system components
- DESIGNED FOR NORTH AMERICAN VEHICLES: Recommended for use with Ford, Chrysler, and GM vehicles that require an orange organic acid technology formula
- GUARANTEED: When installed as part of a complete flush and fill, PEAK guarantees this coolant will provide service life protection of up to 400,000 miles or 15 years.
- 50/50 PREDILUTED FOR QUICK TOP OFFS: Already prediluted to make topping off your cooling system a breeze
- Unsurpassed freeze protection and anti-boil performance outperforms industry standards
- Hybrid organic acid technology fights rust, scale & corrosion while protecting all cooling system metals (including aluminum)
- High-quality additives protect against leaks and won’t harm gaskets, hoses, plastics or original vehicle finish
- Yellow concentrate formula should be mixed with clean tap water or demineralized water at 50/50 ratio for temperatures -34 to 265F; 60/40 for -62 to 270F; and 70/30 for -84 to 267F
- 5 year/150,000 mile guarantee protects against engine failure caused by freeze-ups or boil-overs
This product presentation was made with AAWP plugin.