NHTSA ID Number: 10209223
Manufacturer Communication Number: SSM 50619
Summary
Some 2020-2022 F-Super Duty pickup vehicles equipped with a 6.7L engine and built on or before 23-Sep-2021 may exhibit a thump/whine/knock noise from the fuel tank at idle or during key on, engine off (KOEO) after performing TSB 21-2057. The noise may be more pronounced at fuel levels at or below 1/4 tank. This may be due to the fuel pump. To correct the condition, replace the fuel pump and sender assembly with service part HC3Z-9H307-AR for vehicles with 160/164 inch wheelbase and a midship fuel tank, HC3Z-9H307-AQ for vehicles with 142/148 inch wheelbase and a midship fuel tank, and HC3Z-9H307-AS for vehicles with an aft of axle fuel tank. For claiming, use causal part 9H307 and applicable labor operations in Section 08 of the Service Labor Time Standards (SLTS) Manual.
APPLICABLE VEHICLES
2020 – 2021 TRUCK: FE P558N SUPER DUTY
2022 TRUCK: FE P558N SUPER DUTY
12 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FORD | F-250 SD | 2020-2022 |
| FORD | F-350 SD | 2020-2022 |
| FORD | F-450 SD | 2020-2022 |
| FORD | F-550 SD | 2020-2022 |
1 Associated Document
Manufacturer Communications
SSM 50619 – 2020-2022 F-Super Duty – 6.7L – 142/148/160/164 Inch Wheelbase – Thump/Knock Noise From The Fuel Tank After Performing TSB 21-2057 – Built On Or Before 23-Sep-2021
MC-10209223-0001.pdf 117.737KB
- Better Media, Longer Life: A three-layer pleated cellulose glass media traps the fine rust and grit that budget filters let slip past, and the large-capacity pleats hold more before the flow drops off.
- Fits Your 6.7 Powerstroke: Confirmed for 2017 through 2026 Ford 6.7L Powerstroke F-250, F-350, and F-450. Order by your model year and this is the correct fuel and water separator for your truck.
- How It Works: Doc's Fuel Filters remove contaminants like separate water from dirt, rust, and debris, protecting fuel system components and ensuring peak engine performance.
- Meets The SAE J1985 Standard: Efficiency is confirmed by an independent lab, not an in-house number, and the high-strength carbon steel housing is built to take the pressure of a 6.7L fuel system.
- Ready To Install: Each filter ships with the o-rings you need, so there is nothing extra to buy. Change it every 5,000 to 10,000 miles, 15,000 at the outside, per your vehicle manufacturer's schedule.
- Package Dimensions: 25.908 H x 17.018 L x 21.59 W (centimeters)
- Fit type: Vehicle Specific
- Country of Origin: United States
- Third-Party Tested Efficiency: Independent testing rates it at 98.84 percent efficiency down to 3 microns, so the number is verified rather than claimed.
- Confirms Your Fit: Built for 2011-2016 Ford 6.7L Powerstroke F250, F350, F450, F550. Use the fitment card on this page to confirm your exact year and configuration before ordering.
- How It Works: Doc's Fuel Filters remove contaminants like separate water from dirt, rust, and debris, protecting fuel system components and ensuring peak engine performance.
- Interchange: Motorcraft FD4615, Wix 33615, Baldwin BF9895, Premium Guard DF4615, Purolator F76160. Confirm your part number before ordering.
- Service Interval: Change according to your vehicle’s manufacturer warranty. Fuel Filters should be changed every 5,000 to 10,000 miles, or 15,000 maximum.
- COMPATIBLE VEHICLES: Fits 2011-2016 Ford F-250, F-350, F-450 and F-550 Super Duty models with the 6.7L Powerstroke V8 diesel engine. Not designed for 2017 or newer Super Duty fuel systems.
- REPLACEMENT NUMBERS: Cross-references FD4615, FD-4615, BC3Z-9N184-B and BC3Z9N184B. Check the number on the removed filter or confirm fitment in Amazon Garage before ordering.
- TWO-STAGE SERVICE KIT: Includes the engine-mounted fuel filter and frame-mounted fuel/water separator element for a complete routine filter service. Sealing components are included as shown in the package images.
- FILTER MEDIA AND SEALING: Pleated filter media helps capture dirt and fuel-system contaminants, while the water-separator stage helps remove moisture. Durable housings and fitted seals support stable fuel flow and leak-resistant installation.
- INSTALLATION & WARRANTY: Install both filters together and follow the vehicle service procedure for seal placement and fuel-system priming. Professional installation is recommended for unfamiliar diesel fuel systems. Includes a 1-year warranty.
- OEM ENGINE PROTECTION – Designed to meet Ford specifications and help protect critical engine and fuel system components.
- HIGH-EFFICIENCY FILTRATION – Helps capture harmful contaminants before they can affect engine performance and reliability.
- DURABLE CONSTRUCTION – Built with quality materials to withstand demanding operating conditions and provide consistent performance throughout the service interval.
- OPTIMIZED PERFORMANCE – Supports proper oil or fuel flow for reliable engine operation and long-lasting protection.
- TRUSTED MOTORCRAFT QUALITY – Genuine Motorcraft part designed to meet Ford performance standards for Ford, Lincoln, and Mercury applications.
This product presentation was made with AAWP plugin.